Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Perkenalan

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Informasi Keselamatan

PERINGATAN: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Pastikan daya terputus sebelum pemasangan.
• Patuhi semua kode kelistrikan lokal dan nasional.
• Perangkat ini hanya untuk penggunaan di dalam ruangan.

Isi Paket

Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Sekrup Pemasangan
• Kacang Kawat
• Instruksi Manual (dokumen ini)

Pengaturan dan Instalasi

Alat yang dibutuhkan: Screwdriver, Wire Strippers, Electrical Tape.

1. Matikan Daya: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltage penguji.
2. Hapus Sakelar yang Ada: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Gambar: Depan view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Kabel Saluran: Connect to the timer's LINE terminal.
   • Beban Kawat: Connect to the timer's LOAD terminal.
   • Kabel tanah: Connect to the timer's GROUND terminal.
   • Neutral Wire (if applicable): Some installations may require a neutral wire. Consult your local electrical codes.
4. Pasang Timer: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Pulihkan Daya: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Pengoperasian dan Pemrograman

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Mengatur Waktu dan Hari Saat Ini

1. Tekan tombol JAM tombol. Tampilan waktu akan berkedip.
2. Gunakan JAM Dan MENIT tombol untuk menyesuaikan waktu saat ini.
3. Tekan tombol HARI tombol untuk mengatur hari saat ini dalam seminggu.
4. Tekan JAM again to save and exit, or wait a few seconds for it to save automatically.

2. Pemrograman Peristiwa ON/OFF

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Tekan tombol PROG button. The display will show "1 ON".
2. Menggunakan JAM, MENIT, Dan HARI buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Tekan PROG lagi. Layar akan menampilkan "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the JAM, MENIT, Dan HARI tombol.
5. Repeat steps 1-4 for additional programs (2 ON/OFF through 6 ON/OFF).
6. Setelah mengatur semua program yang diinginkan, tekan JAM untuk kembali ke operasi normal.

3. Penggantian Manual

To manually turn the connected device ON or OFF outside of programmed times, press the AKTIF/NONAKTIF button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Pemeliharaan

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Penggantian Baterai: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Pembersihan: Clean the timer's surface with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.

Penyelesaian Masalah

Spesifikasi

• Merek: Intermatik
• Nomor Model: SS7C
• Berat Barang: 0.35 pon
• Jumlah Pengaturan: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Ukuran Layar: 1.5 inci
• Warna: Putih
• Pabrikan: INTERMATIC INC
• UPC-nya: 078275056732
• ASIN: B0000BYDA2

Garansi dan Dukungan

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Garansi produsen terbatas 1 tahun sejak tanggal pembelian. Garansi ini mencakup cacat bahan dan pengerjaan dalam penggunaan normal.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic websitus atau lihat rincian kontak yang disediakan bersama kemasan produk Anda.