Cooper-Atkins SRH77A-ONLY-E

Manual Pengguna Instrumen Termistor Suhu/Kelembaban 1 dan 2 Zona Cooper-Atkins SRH77A-ONLY-E

Model: SRH77A-ONLY-E

Perkenalan

This manual provides detailed instructions for the proper use and maintenance of your Cooper-Atkins SRH77A-ONLY-E Thermistor Instrument. This device is designed for accurate temperature and humidity measurements across one or two zones, featuring a backlight display, sealed keypad, and Min/Max memory functions. Please read this manual thoroughly before operating the instrument.

Informasi Keselamatan

Observe the following safety precautions to ensure safe operation and to prevent damage to the instrument:

This unit is not waterproof. Do not immerse it in water.
If the unit becomes wet inside due to cleaning, rain, or condensation, unreliable readings may occur.
Do not use the instrument for purposes other than its intended use as a temperature and humidity measurement device.
Replace the battery promptly when the 'LO P' indicator appears to ensure accurate readings.

Produk Selesaiview

The Cooper-Atkins SRH77A-ONLY-E is a versatile thermistor instrument designed for precise temperature and humidity monitoring. Key features include:

Tampilan lampu latar: Untuk meningkatkan visibilitas dalam kondisi cahaya redup.
Sealed Keypad: Protects the instrument from spills and dust.
Memori Min/Maks: Records the minimum and maximum readings.
Mati Otomatis: Conserves battery life after 15 minutes of non-use or continuous ON mode.
Diferensial Suhu: Measures the difference between two temperature probes.
%RH and Wet Bulb: Provides relative humidity and wet bulb temperature readings.
Battery Eliminator Jack: Allows for external power supply (adapter not included).

Cooper-Atkins SRH77A-ONLY-E Thermistor Instrument in its protective blue case, open to show the digital display and control buttons.

Image: The SRH77A-ONLY-E instrument displayed within its protective blue case, showing the digital screen, control buttons, and internal instructions.

Pengaturan

1. Pemasangan Baterai

The instrument requires one 9-volt NEDA 1604 or equivalent alkaline battery.
Buka tempat baterai yang terletak di bagian belakang unit.
Connect the 9-volt battery to the battery clip, observing correct polarity.
Letakkan baterai ke dalam kompartemennya dan tutup penutupnya dengan rapat.

2. Koneksi Probe

For temperature measurements, insert the thermistor probe(s) into the T1 and/or T2 jacks.
For humidity measurements, insert the humidity probe into the T3 jack.

Petunjuk Pengoperasian

1. Daya Hidup/Mati

Untuk memutar unit ON, tekan tombol AKTIF/NONAKTIF tombol.
Untuk memutar unit MATI, tekan dan tahan tombol AKTIF/NONAKTIF tombol selama 3 detik.

2. Pengukuran Suhu

Ensure a temperature probe is inserted into the T1 or T2 jack.
Tekan tombol suhu 1 or suhu 2 button to display the temperature reading for the respective zone.
The display will show the current temperature. If no probe is connected, the display will show '----'.

3. Humidity Measurement

Ensure a humidity probe is inserted into the T3 jack.
Tekan tombol RH button to display the relative humidity (%RH) reading.

4. Min/Max Memory

Tekan tombol MIN / MAX button to display the minimum and maximum recorded readings.
Tekan tombol MIN / MAX button again to clear the memory and reset for new readings.

5. Temperature Differential

With probes in T1 and T2, press the PERBEDAAN button to display the temperature difference between probe T1 and T2.

6. Wet Bulb Temperature

With a humidity probe in T3, press the BOLA BASAH button to display the calculated wet bulb temperature.

7. Lampu latar

Tekan tombol LIGHT/DC button to illuminate the display backlight.
To turn the backlight off, press the LIGHT/DC tombol tiga kali dalam 5 detik.

Pemeliharaan

To clean the instrument, wipe the exterior with a damp kain. Jangan gunakan pembersih abrasif atau merendam unit di dalam air.
Store the instrument in a dry environment when not in use.
Replace the 9-volt battery when the 'LO P' indicator appears on the display to ensure continued accuracy.

Penyelesaian Masalah

Masalah	Kemungkinan Penyebab / Solusi
'LO P' displayed	Low battery power. Replace the 9-volt NEDA 1604 or equivalent alkaline battery.
'HI P' displayed	High battery power. This is less common but indicates a power issue. Ensure correct battery type and installation.
Temperature reading shows '----' or is inaccurate	Probe not properly connected to the T1/T2 jack. Temperature being monitored is outside the instrument's range (-40°F to 300°F). Probe is damaged or faulty. Unit may have been exposed to moisture internally.
Humidity reading shows '----' or is inaccurate	Humidity probe not properly connected to the T3 jack. Humidity being monitored is above 95% RH. Humidity probe is damaged or faulty. Unit may have been exposed to moisture internally.
Unit tidak menyala	Battery is dead or incorrectly installed. Check battery and replace if necessary.

Spesifikasi

Fitur	Spesifikasi
Nomor Model	SRH77A-ONLY-E
Kisaran Suhu	-40°F hingga 300°F (-40°C hingga 150°C)
Rentang Pengukuran Kelembaban	10 to 95% RH (30 to 130°F / 1 to 54°C)
Sumber Daya	9-volt Battery Powered
Jenis Tampilan	Digital
Bahan Luar	Plastik
Dimensi Paket	9.41x8.03x3.54 inci
Berat	1.1 pon

Garansi dan Dukungan

Cooper-Atkins Corporation warrants this instrument to be free from defects in materials and workmanship for a specified period from the date of purchase. For specific warranty details, technical support, or service inquiries, please contact Cooper-Atkins customer service directly. Keep your proof of purchase for warranty claims.

For further assistance, please visit the official Cooper-Atkins websitus atau menghubungi dukungan pelanggan mereka.