Nomor Seri 15163
SEM Presidio Interior Paint Aerosol (Model 15163) Instruction Manual
Brand: SEM | Model: 15163
Perkenalan
This manual provides detailed instructions for the safe and effective use of the SEM Presidio Interior Paint Aerosol, Model 15163. This product is designed for coating interior surfaces such as metal, plastic, and vinyl, offering a matte finish. Please read all instructions carefully before use.

Image: SEM Presidio Interior Paint Aerosol can, 12 oz, with a black color swatch. The label indicates "COLOR COAT Flexible Coating" and model number 15163.
Informasi Keselamatan
PERINGATAN: This product is an extremely flammable aerosol. Contents under pressure. Vapors may cause flash fire. Harmful if swallowed. Vapors harmful. Causes serious eye irritation. Causes skin irritation. Read all cautions on the back panel of the can before use.
- Gunakan di area yang berventilasi baik.
- Jauhkan dari panas, percikan api, nyala api terbuka, dan permukaan panas. Dilarang merokok.
- Jangan menusuk atau membakar wadah.
- Jangan sampai terkena suhu melebihi 120°F (49°C).
- Kenakan alat pelindung diri yang sesuai, termasuk sarung tangan dan pelindung mata.
- Avoid breathing vapors or spray mist.
- Jauhkan dari jangkauan anak-anak.
- Buang isi/wadah sesuai dengan peraturan setempat.
Peringatan Proposisi 65: Produk ini mungkin mengandung bahan kimia yang diketahui oleh Negara Bagian California menyebabkan kanker dan cacat lahir atau kerusakan reproduksi lainnya.
Pengaturan dan Persiapan
- Pembersihan Permukaan: Thoroughly clean the surface to be painted with a suitable wax and grease remover. Ensure the surface is free of dirt, oil, wax, and other contaminants.
- Persiapan Permukaan: For optimal adhesion, lightly abrade smooth surfaces with fine-grit sandpaper (e.g., 400-600 grit wet/dry) or a scuff pad. Re-clean the abraded surface to remove any dust.
- Penutupan: Mask off any areas not intended for painting using painter's tape and masking paper or plastic.
- Kondisi Lingkungan: Ensure the application area is well-ventilated. Apply paint in a temperature range of 50°F to 85°F (10°C to 29°C) and moderate humidity. Avoid direct sunlight or extremely humid conditions.
- Semprotan Uji: Always perform a test spray on an inconspicuous area or a test panel to verify color match and adhesion before applying to the main surface.
Instruksi Pengoperasian (Aplikasi)
- Kocok Kaleng: Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue to shake occasionally during application.
- Teknik Aplikasi: Hold the can approximately 8-10 inches (20-25 cm) from the surface. Apply light, even coats using a steady, sweeping motion. Overlap each pass slightly for uniform coverage.
- Beberapa Lapisan: Apply 2-3 light coats to achieve desired color and coverage. Allow sufficient flash-off time between coats (typically 5-10 minutes, or until the surface is tacky but not wet).
- Waktu Pengeringan: The paint will be dry to the touch within an hour. For full cure and maximum durability, allow 24 hours. Avoid handling or exposing the painted surface to moisture during the curing process.
Pemeliharaan dan Penyimpanan
- Can Clean-up: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging. Wipe the nozzle clean.
- Penyimpanan: Store the aerosol can in a cool, dry place between 50°F and 85°F (10°C and 29°C). Do not store in direct sunlight or where temperatures may exceed 120°F (49°C).
- Pembuangan: Dispose of empty cans or unused product according to local hazardous waste regulations.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Uneven Coverage / Streaks | Improper shaking, inconsistent spray distance, too thick coats. | Shake can thoroughly. Maintain consistent 8-10 inch distance. Apply multiple light coats. |
| Daya rekat yang buruk | Inadequate surface cleaning or preparation. | Ensure surface is clean and free of contaminants. Lightly abrade smooth surfaces. |
| Penyumbatan Nosel | Paint dried in nozzle. | Invert can and spray until clear propellant appears after each use. If clogged, try soaking nozzle in mineral spirits. |
| Drips or Runs | Applying too much paint in one coat, holding can too close. | Apply thinner coats. Increase spray distance to 8-10 inches. |
Spesifikasi Produk
- Merek: SEJARAH
- Nama Model: Benteng
- Nomor Bagian: 15163
- Warna: Black (Presidio)
- Jenis Selesai: Tidak mengkilap
- Bentuk Barang: Aerosol
- Volume Barang: 12 Fluid Ounces (340g)
- Kegunaan Khusus: Permukaan interior
- Rekomendasi Permukaan: Metal, Plastic, Vinyl
- Fitur Khusus: Fade Resistant, Low VOC
- Cakupan: Tinggi
- Dry Time (Touch): Sekitar 1 jam
- Waktu Penyembuhan Penuh: 24 Jam
- Tingkat Tahan Air: Tidak Tahan Air
- Berat Barang: 1 pon
- Dimensi Paket: 8.11x2.56x2.56 inci
Informasi Garansi
No specific warranty information is provided in the product details. For details regarding product warranty, please contact SEM directly or refer to their official weblokasi.
Dukungan Pelanggan
For technical assistance, product inquiries, or safety data sheets, please contact the manufacturer:
Pabrikan: SEJARAH
Please visit the official SEM webSitus ini menyediakan informasi kontak dan sumber daya lebih lanjut.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.