Perkenalan
This manual provides essential information for the safe and efficient operation of your Peavey IPR 2 5000 Power Amplifier. Please read these instructions thoroughly before operating the unit to ensure proper setup, optimal performance, and to prevent damage.
Informasi Keselamatan Penting
PERHATIAN : RISIKO SENGATAN LISTRIK. JANGAN DIBUKA.
PERINGATAN: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place objects filled with liquids, such as vases, on this apparatus. This device must be mounted in a rack only. Installer should refer to the mounting instructions.
Always ensure proper grounding and ventilation. Do not block ventilation openings. Refer all servicing to qualified service personnel.
Pengaturan dan Koneksi
The Peavey IPR 2 5000 is designed for rack mounting. Ensure adequate space for ventilation around the unit.
Panel Belakang Atasview
Koneksi Input
Itu amplifier features balanced XLR and 1/4" (6.3mm) inputs for each channel (Channel A and Channel B).
- Konfigurasi Pin XLR: Pin 1 (Sleeve), Pin 2 (Tip), Pin 3 (Ring).
- 1/4" (6.3mm) Jack Configuration: Sleeve, Tip, Ring.
- A THRU/OUT and B THRU/OUT: These jacks allow you to send the input signal from Channel A or B to another amppenguat atau perangkat.
Koneksi Output
Speaker outputs are provided for Channel A and Channel B. These are Speakon-type connectors.
- Keluaran Pembicara: Each channel supports 800 Watts/40V RMS at a minimum impedance of 2 Ohms.
- Konfigurasi Pin: 1+ Positive, 1- Negative.
Sakelar Crossover
Each channel has a three-position switch for crossover settings:
- HI PASS: Engages a high-pass filter, suitable for driving mid-high frequency speakers.
- RANGKAIAN LENGKAP: Bypasses the crossover, sending the full audio spectrum to the output.
- SUBTITLE LISTRIK: Engages a low-pass filter, ideal for driving subwoofers.
Koneksi Daya
Hubungkan amplifier to a standard 120V~, 60Hz, 400 Watts AC power source using the provided power cable. Ensure the power source can supply sufficient current (e.g., a dedicated 20 amp circuit for high output).
- Pemecah: The unit includes a resettable circuit breaker for protection.
Petunjuk Pengoperasian
Before powering on, ensure all connections are secure and correct. Start with volume controls at their minimum setting.
- Nyalakan: Press the power button on the front panel. The unit will perform a self-test.
- Sinyal Input: Apply your audio input signal to the XLR or 1/4" inputs.
- Penyesuaian Volume: Slowly increase the volume controls for Channel A and Channel B to the desired listening level.
- Indikator Pemantauan: Observe the front panel indicators for signal presence, DDT (Distortion Detection Technique) activation, temperature, and DC protection.
DDT Protection
The Peavey IPR 2 5000 features DDT (Distortion Detection Technique) protection, which prevents amplifier clipping and speaker damage by dynamically limiting the output signal when distortion is detected. This ensures clear sound even under high demand.
Pemeliharaan
Perawatan rutin memastikan umur panjang dan kinerja optimal dari peralatan Anda. amppengangkat.
- Pembersihan: Gunakan kain lembut dan kering untuk membersihkan bagian luarnya. Jangan gunakan cairan pembersih atau pelarut.
- Ventilasi: Ensure that the ventilation grilles and fan are free from dust and obstructions. Periodically clean the fan area with compressed air if necessary.
- Koneksi Kabel: Periodically check all input and output cable connections for tightness and wear.
Penyelesaian Masalah
Jika Anda mengalami masalah dengan amplifier, lihat masalah umum dan solusi berikut:
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Tidak ada daya | Power cable disconnected, circuit breaker tripped, power outlet fault. | Check power cable, reset circuit breaker, test power outlet. |
| Tidak ada keluaran suara | Input cables disconnected, speaker cables disconnected, volume too low, incorrect crossover setting, DDT active. | Verify all cable connections, increase volume, check crossover switch, ensure input signal is present. If DDT is active, reduce input level. |
| Suara terdistorsi | Input signal too high, speaker impedance too low, DDT engaged. | Reduce input signal level, ensure speaker impedance meets specifications (2 Ohms minimum), check speaker wiring. |
| Overheating / Fan noise | Blocked ventilation, excessive load, dust accumulation. | Ensure clear airflow around the unit. Reduce load if possible. Clean fan and vents. |
Jika masalah berlanjut setelah mencoba solusi ini, hubungi teknisi servis yang berkualifikasi.
Spesifikasi
| Fitur | Detil |
|---|---|
| Model | IPR 25000 Bahasa Indonesia |
| Merek | Peavey |
| Daya Keluaran (per saluran) | 800 Watts/40V RMS (2 Ohms Min) |
| Jumlah Saluran | 2 |
| Konektor Input | XLR, 1/4" (6.3 mm) |
| Konektor keluaran | Speakon-type |
| Pengaturan Crossover | Hi Pass, Full Range, Subwoofer |
| Konsumsi Daya | 120V~, 60Hz, 400 Watts |
| Dimensi (P x L x T) | 19x4x4 inci |
| GTIN (UPC) | 014367153422 |
Garansi dan Dukungan
The Peavey IPR 2 5000 Power Amplifier dilengkapi dengan Garansi 1 tahun. For warranty claims or technical support, please contact Peavey Electronics directly or refer to their official weblokasi.
Pabrikan: Elektronik Peavey
