Green Valley 156001 Easy One Roof Bars User Manual

1. Pendahuluan

The Green Valley Easy One Roof Bars are designed for vehicles not equipped with original longitudinal roof rails. These roof bars provide a secure and adaptable solution for transporting various loads on your vehicle's roof. This manual provides essential information for the correct installation, safe operation, and proper maintenance of your roof bars.

2. Informasi Keselamatan

• Kapasitas Beban Maksimum: Do not exceed the maximum load capacity of 50 kg (110 lbs) for these roof bars. Always refer to your vehicle's owner's manual for its specific roof load limit.
• Pengikat Aman: Ensure all components are securely fastened before driving. Regularly check the tightness of all bolts and fasteners, especially after the first few kilometers and after driving on rough roads.
• Distribusi Beban: Distribute the load evenly across the roof bars. Secure items firmly to prevent shifting during transit.
• Kecepatan Mengemudi: Adjust your driving speed according to the load and road conditions. Avoid sudden braking or sharp turns when carrying a load.
• Izin Tinggi: Be aware of the increased height of your vehicle when roof bars and a load are installed, especially when entering garages, car washes, or low-clearance areas.
• Bahan: These roof bars are made of alloy steel with an anti-slip coating.

3. Isi Paket

Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:

• 2 x Green Valley Easy One Roof Bars (pre-assembled profile and feet)
• 1 x Fixing Kit (specific to vehicle model)
• 1 x Mounting Key (Allen key)
• Manual Instruksi

4. Pengaturan dan Instalasi

The Green Valley Easy One Roof Bars feature pre-assembled profiles and feet for simplified installation. The method of attachment varies depending on your vehicle type:

• Roof Support: For vehicles without integrated rails, the bars may rest directly on the roof.
• Kusen Pintu: Attachment within the door frame seal.
• Specific Anchoring Points: Utilizing dedicated anchoring points provided by the vehicle manufacturer.

Langkah-langkah Instalasi:

1. Identifikasi Titik Pemasangan: Locate the designated mounting points on your vehicle's roof. These are typically indicated in your vehicle's owner's manual or by specific markings on the roof. Refer to the diagram below for typical mounting locations (A, B, C, D).


Image: Illustration of typical roof bar mounting points (A, B, C, D) on a vehicle roof. The lower part of the image shows a roof bar foot being inserted into its base and then secured with an Allen key.

2. Prepare the Feet: The feet are pre-assembled to the bars. If necessary, adjust the position of the feet along the bar to match your vehicle's width.
3. Posisikan Batang-batangnya: Carefully place the roof bars onto the identified mounting points. Ensure the feet align correctly with the vehicle's roof or anchoring points.
4. Amankan Kaki: Using the provided mounting key (Allen key), tighten the fasteners on each foot. Tighten gradually and evenly, alternating between feet, until the bars are firmly secured to the vehicle. Do not overtighten.
5. Pemeriksaan Akhir: After tightening, gently pull on each roof bar to ensure it is securely attached and does not move. Re-check all fasteners for tightness.

5. Petunjuk Pengoperasian

Once installed, your Green Valley Easy One Roof Bars are ready for use. Follow these guidelines for safe operation:

• Memuat: Place items centrally on the roof bars and distribute weight evenly.
• Securing Load: Always use appropriate straps, ropes, or cargo nets to firmly secure your load to the roof bars. Ensure no part of the load can shift, slide, or detach during travel.
• Aerodinamika: Large or irregularly shaped loads can affect vehicle aerodynamics and fuel consumption. Drive cautiously.
• Pemeriksaan Rutin: During long journeys, periodically stop and check the security of your load and the tightness of the roof bar fasteners.

6. Pemeliharaan

Proper maintenance will extend the lifespan of your roof bars:

• Pembersihan: Clean the roof bars regularly with mild soap and water. Avoid abrasive cleaners or solvents that could damage the anti-slip coating or finish.
• Inspeksi: Periodically inspect the bars for any signs of wear, damage, or corrosion. Check all plastic and rubber components for cracks or deterioration.
• Pengencang: Ensure all bolts and fasteners remain free of rust and are properly tightened.
• Penyimpanan: When not in use, it is recommended to remove the roof bars from your vehicle and store them in a dry place to prevent unnecessary wear and exposure to elements.

7. Penyelesaian masalah

• Bars feel loose after installation: Re-check all fastening points. Ensure the mounting key was used to fully tighten all bolts. If the issue persists, verify that the correct fitting kit for your vehicle model was used.
• Kebisingan angin yang berlebihan: Ensure the bars are correctly positioned and tightened. Wind noise can sometimes be reduced by adjusting the position of the load or adding fairings (not included).
• Kesulitan pemasangan: Confirm that the roof bars are compatible with your specific vehicle make and model. Refer to the product compatibility guide or your vehicle's manual.

8. Spesifikasi

9. Garansi dan Dukungan

Specific warranty details are not provided in this manual. For warranty information, product support, or to inquire about compatible vehicle models, please contact Green Valley customer service or refer to the official Green Valley webSitus. Selalu simpan bukti pembelian Anda untuk klaim garansi.