PLUS 58-437 IS-009NQ Seal Name Cube Instruction Manual

1. Pendahuluan

This manual provides instructions for the proper use and maintenance of your PLUS 58-437 IS-009NQ Seal Name Cube. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Image 1.1: The PLUS 58-437 IS-009NQ Seal Name Cube in black.

2. Produk Lebihview

The PLUS 58-437 IS-009NQ Seal Name Cube is a self-inking stamp designed for ease of use and consistent impressions. Its unique square body prevents rolling and assists in precise alignment.

Fitur Utama:

• Square Body Design: Prevents the stamp from rolling when placed on a desk or in a drawer, and keeps the cap secure when removed during use.
• Straight Impression: The square shape allows for easy alignment with document grids or ruled lines, ensuring straight and accurate stamping.
• Kapasitas Tinggi: Provides approximately 3,000 continuous impressions before needing an ink cartridge replacement.
• Replaceable Ink Cartridge: Designed for easy and mess-free ink cartridge replacement, making the stamp reusable and economical.
• Warna Tinta: Vermilion (oil-based pigment ink).

Image 2.1: Product dimensions of the Seal Name Cube (18mm x 18mm x 70mm).

Image 2.2: The square body prevents the stamp from rolling.

3. Pengaturan

The PLUS 58-437 IS-009NQ Seal Name Cube comes pre-inked and ready for immediate use. No initial setup or assembly is required.

1. Remove the protective cap from the stamp.
2. Place the cap aside. Its square design will prevent it from rolling.

4. Petunjuk Pengoperasian

Follow these steps to achieve clear and straight impressions:

1. Penempatan: Hold the stamp firmly. Align the square body of the stamp with the grid lines or ruled sections of your document. This helps ensure a perfectly straight impression.
2. Stampsedang: Tekan tombolamp down firmly and evenly onto the desired surface. Apply consistent pressure to ensure the entire impression surface makes contact.
3. Melepaskan: Angkat stamp straight up to avoid smudging.
4. Ringkasan: After use, replace the protective cap to prevent the ink from drying out.

Important Note: This product is designed for general stamping purposes and should not be used for official seals or documents requiring legal authentication.

Image 4.1: The square body design facilitates straight and accurate stamping.

Image 4.2: The impression surface has a diameter of 9mm.

5. Pemeliharaan

Penggantian Kartrid Tinta:

When the impression starts to fade, it is time to replace the ink cartridge. The PLUS 58-437 IS-009NQ uses a replaceable ink cartridge system for convenience and extended product life.

1. Identify Cartridge: The ink cartridge is located inside the stamp tubuh.
2. Lepaskan Kartrid Lama: Carefully separate the stamp body to access the old cartridge. Gently pull out the used cartridge.
3. Masukkan Kartrid Baru: Insert a new, compatible PLUS ink cartridge (sold separately) into the designated slot. Ensure it clicks securely into place.
4. Berkumpul kembali: Reassemble the stamp tubuh.

Note: Always use genuine PLUS replacement ink cartridges to ensure proper function and ink quality.

Image 5.1: Illustration of the ink cartridge replacement process.

6. Penyelesaian masalah

7. Spesifikasi

• Model: 58-437 IS-009NQ
• Merek: PLUS
• Dimensi-dimensi eksternal: 18mm (W) x 18mm (D) x 70mm (H)
• Impression Surface Diameter: ukuran 9mm
• Jenis Tinta: Oil-based pigment ink
• Warna Tinta: Merah terang
• Approximate Impressions per Cartridge: 3,000
• Jenis Kartrid: Tergantikan

8. Garansi dan Dukungan

For warranty information or technical support, please contact the manufacturer, PLUS, directly. Refer to the product packaging or the official PLUS website for contact details and warranty terms specific to your region.

Pabrikan: PLUS (プラス)

Weblokasi: www.plus.co.jp (This is a general link, specific support links may vary by region)