OHLINS LEGEND TWIN S36PR1C1L Rear Suspension Instruction Manual

1. Pendahuluan

This manual provides essential information for the installation, adjustment, and maintenance of your OHLINS LEGEND TWIN S36PR1C1L Rear Suspension. The LEGEND TWIN is a fourth-generation fully adjustable twin shock absorber designed to enhance the performance and handling of your motorcycle. Please read these instructions carefully before proceeding with installation or adjustments.

2. Informasi Keselamatan

• Always ensure the motorcycle is securely supported on a stand before beginning any work.
• Kenakan perlengkapan keselamatan yang sesuai, termasuk pelindung mata dan sarung tangan.
• If you are unsure about any part of the installation or adjustment process, consult a qualified motorcycle technician.
• Incorrect installation or adjustment can lead to serious injury or damage to the motorcycle.
• Do not modify the suspension components.

3. Fitur Produk

• Panjang Bebas: ukuran 325mm
• memantul DampPenyesuaian: 30 langkah
• Kompresi DampPenyesuaian: 4 langkah
• Preload Adjustment: Single nut stepless adjuster
• Penyesuaian Ketinggian Berkendara: +10/-0mm adjustment range
• Stroke: ukuran 88mm
• Spring Color: Kuning
• Piston Diameter: ukuran 36mm
• Tipe Tangki: Gendongan
• Tarif Musim Semi: 16-25 N/mm

4. Spesifikasi

5. Instalasi (Pengaturan)

The OHLINS LEGEND TWIN S36PR1C1L rear suspension is designed for specific Honda CB400 series models, including CB400SF [NC31, NC39], CB400SF Revo [NC42], CB400SB [NC39], and CB400SB Revo [NC42].

1. Persiapan: Park the motorcycle on a stable, level surface. Use a suitable motorcycle stand to lift the rear wheel off the ground, ensuring the swingarm is free to move.
2. Remove Original Shocks: Carefully remove the bolts securing the original rear shock absorbers at both the upper and lower mounting points. Retain all original hardware.
3. Install OHLINS Shocks: Position the OHLINS LEGEND TWIN shocks. Install the upper mounting bolts first, then align and install the lower mounting bolts. Ensure any spacers or collars are correctly placed according to your motorcycle's specifications.
4. Kencangkan Baut: Hand-tighten all mounting bolts initially. Once both shocks are in place, refer to your motorcycle's service manual for the correct torque specifications for the upper and lower shock mounting bolts. Tighten them to the specified torque.
5. Pemeriksaan Akhir: Lower the motorcycle from the stand. Check for proper clearance and ensure all components are securely fastened.

Catatan: Professional installation is highly recommended to ensure correct fitment and safety.

Image: OHLINS LEGEND TWIN S36PR1C1L Rear Suspension, featuring yellow springs and a piggyback reservoir.

6. Adjustment (Operating)

The OHLINS LEGEND TWIN S36PR1C1L offers multiple adjustment options to fine-tune your motorcycle's handling characteristics.

6.1. Preload Adjustment

Preload adjusts the initial compression of the spring, affecting ride height and sag. Use the single nut stepless preload adjuster to increase or decrease spring compression. Increasing preload will raise the ride height and reduce sag, while decreasing it will lower the ride height and increase sag. Adjust in small increments and test the motorcycle's feel.

6.2. Rebound DampPenyesuaian

Reboundamping controls the speed at which the shock absorber extends after compression. The S36PR1C1L features 30 steps of rebound adjustment. A higher setting (more clicks in) will slow down the rebound, providing more stability. A lower setting (more clicks out) will speed up the rebound, allowing the wheel to follow bumps more quickly. Adjust to prevent the rear wheel from 'pogo-sticking' or packing down.

6.3. Compression DampPenyesuaian

Kompresiamping controls the speed at which the shock absorber compresses. This model offers 4 steps of compression adjustment. A higher setting will make the suspension feel firmer, resisting bottoming out. A lower setting will make it softer, absorbing small bumps more effectively. Adjust to balance comfort and control, avoiding harshness or excessive dive.

6.4. Ride Height Adjustment

The ride height can be adjusted within a range of +10mm to -0mm. This adjustment can subtly alter the motorcycle's geometry, affecting steering response and stability. Make small adjustments and evaluate the change in handling.

7. Pemeliharaan

Regular maintenance ensures optimal performance and longevity of your OHLINS rear suspension.

• Pembersihan: Keep the shock absorbers clean from dirt, dust, and road grime. Use mild soap and water, then rinse thoroughly. Avoid high-pressure washers directly on seals.
• Inspeksi: Periodically inspect the shocks for any signs of oil leaks, damage to the shaft, springs, or mounting points. Check for loose bolts.
• Melayani: OHLINS shock absorbers require periodic servicing by an authorized OHLINS service center. Refer to the OHLINS website or your dealer for recommended service intervals.

8. Penyelesaian masalah

If you experience issues with your suspension, consider the following:

• Kualitas Berkendara yang Buruk: Check your preload, rebound, and compression settings. Ensure they are appropriate for your weight and riding style.
• Excessive Sag: Increase spring preload.
• Harsh Ride: Decrease compression damping or check for excessive preload.
• Bouncy Ride (Rear): Meningkatkan rebound damping.
• Bottoming Out: Increase compression damping or spring preload.
• Kebocoran Minyak: If you observe oil leaks, discontinue use and contact an authorized OHLINS service center immediately.

9. Garansi dan Dukungan

For specific warranty information, please refer to the documentation provided with your purchase or contact your OHLINS dealer. OHLINS products are backed by a manufacturer's warranty against defects in materials and workmanship.

For technical support, service, or genuine OHLINS spare parts, please contact your authorized OHLINS dealer or visit the official OHLINS webKunjungi situs ini untuk informasi kontak di wilayah Anda.