Einhell Rotary Hammer TC-RH 800 E Instruction Manual

1. Pendahuluan

Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.

2. Petunjuk Keselamatan Umum

Selalu perhatikan tindakan pencegahan keselamatan berikut saat menggunakan perkakas listrik:

• Keselamatan Area Kerja: Jaga agar area kerja tetap bersih dan terang. Area yang berantakan atau gelap dapat meningkatkan risiko kecelakaan. Jangan mengoperasikan peralatan listrik di lingkungan yang mudah meledak, seperti di dekat cairan, gas, atau debu yang mudah terbakar.
• Keamanan Listrik: Steker alat listrik harus sesuai dengan stopkontak. Jangan pernah memodifikasi steker dengan cara apa pun. Hindari kontak tubuh dengan permukaan yang diarde atau diarde seperti pipa, radiator, kompor, dan lemari es.
• Keamanan Pribadi: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Penggunaan dan Perawatan Alat: Jangan memaksakan perkakas listrik. Gunakan perkakas listrik yang sesuai dengan kebutuhan Anda. Cabut steker dari sumber listrik sebelum melakukan penyesuaian, mengganti aksesori, atau menyimpan perkakas listrik.
• Melayani: Servis perkakas listrik Anda oleh teknisi ahli dengan hanya menggunakan suku cadang pengganti yang sama. Ini akan memastikan keamanan perkakas listrik tetap terjaga.

3. Komponen Produk

Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:

• Chuck SDS Plus
• Pegangan Bantu
• Pemberhentian Kedalaman
• Saklar Pemilih Mode (Bor, Bor Palu, Pahat)
• Rotation Direction Switch (Forward/Reverse)
• On/Off Trigger with Speed Control
• Lock-on Button (for continuous operation)

Gambar 1: Lebihview of the Einhell TC-RH 800 E Rotary Hammer.

Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.

Gambar 3: Tampilan jarak dekat view of the SDS Plus chuck, designed for quick and secure bit changes.

Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.

Figure 5: The ergonomic main handle designed for comfortable and secure grip.

Figure 6: The adjustable depth stop, used to set a precise drilling depth.

Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.

4. Pengaturan

4.1 Memasang Pegangan Bantu

The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.

4.2 Memasang Penghenti Kedalaman

Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.

Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.

4.3 Inserting SDS Plus Drill Bits/Chisels

1. Clean the shank of the drill bit or chisel and apply a thin layer of grease.
2. Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
3. Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5. Petunjuk Pengoperasian

5.1 Pemilihan Mode

The mode selector switch allows you to choose the appropriate operating mode:

• Pengeboran (Hanya Rotasi): For drilling in wood, metal, or plastics.
• Hammer Drilling (Rotation with Impact): For drilling in concrete and masonry.
• Chiseling (Impact Only): For light chiseling work, such as removing tiles or plaster.

To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.

5.2 Menghidupkan/Mematikan dan Kontrol Kecepatan

Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.

5.3 Arah Rotasi

Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.

6. Pemeliharaan

Perawatan rutin memastikan umur pakai yang panjang dan kinerja optimal dari mesin bor putar Anda.

• Pembersihan: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp kain. Jangan gunakan bahan pembersih atau pelarut yang keras.
• Perawatan Chuck: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
• Inspeksi Kabel: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
• Penyimpanan: Store the tool in its original case in a dry, secure place, out of reach of children.

7. Penyelesaian masalah

8. Spesifikasi Teknis

9. Informasi Garansi

Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell weblokasi.

10. Dukungan

Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official websitus untuk bantuan dan sumber daya lebih lanjut.

Resmi Weblokasi: www.einhell.com