Einhell 4300345 TH-MS 2513 T Miter and Table Saw Instruction Manual

1. Pendahuluan

Thank you for choosing the Einhell TH-MS 2513 T Miter and Table Saw. This versatile power tool is designed for precise cutting of wood, plastic, and non-ferrous metals, offering both miter saw and table saw functionalities. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your saw. Please read these instructions carefully before first use and keep them for future reference.

Gambar 1: Lebihview of the Einhell TH-MS 2513 T Miter and Table Saw.

2. Petunjuk Keselamatan

Always observe the following safety precautions to prevent electric shock, fire, and serious injury:

• Bacalah seluruh manual: Understand all instructions and warnings before operating the saw.
• Wear personal protective equipment (PPE): Always wear safety glasses, hearing protection, and a dust mask. Use gloves when handling saw blades.
• Jaga area kerja tetap bersih dan terang: Area yang berantakan atau gelap mengundang kecelakaan.
• Jangan beroperasi di lingkungan yang mudah meledak: Jangan menggunakan perkakas listrik di dekat cairan, gas, atau debu yang mudah terbakar.
• Amankan benda kerja: Selalu clamp atau pegang benda kerja dengan kuat untuk mencegah pergerakan selama pemotongan.
• Use correct blade: Ensure the saw blade is sharp, clean, and suitable for the material being cut. Never use damaged or dull blades.
• Pertahankan pijakan dan keseimbangan yang tepat: Jangan melampaui batas.
• Putuskan daya: Always unplug the saw before making adjustments, changing accessories, or performing maintenance.
• Keep guards in place: Never operate the saw without all guards properly installed and functioning.
• Hindari start yang tidak disengaja: Pastikan sakelar dalam posisi mati sebelum mencolokkan alat.

3. Pengaturan

3.1 Pembongkaran dan Pemeriksaan

Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Do not operate the saw if any parts are damaged or missing. Contact customer support immediately.

3.2 Perakitan

The Einhell TH-MS 2513 T requires minimal assembly. Ensure all included components, such as the push stick and any necessary guards, are properly attached according to the diagrams in the separate assembly guide (if provided). The work table is made of lightweight and stable cast aluminum, designed for precise work.

3.3 Saw Blade Installation

1. Putuskan daya: Pastikan gergaji telah dicabut dari sumber listrik.
2. Open blade guard: Carefully lift or open the blade guard to access the blade arbor.
3. Install blade: Place the saw blade (Ø 250 x Ø 30 x 2.8 mm, 36 teeth) onto the arbor, ensuring the rotation direction indicated on the blade matches the arrow on the saw.
4. Secure blade: Fasten the blade with the provided washer and arbor nut, tightening securely.
5. Close guard: Return the blade guard to its original position.

Figure 2: Saw blade and protective guard in miter saw configuration.

4. Petunjuk Pengoperasian

4.1 Operasi Umum

Before starting, ensure your workpiece is stable and properly supported. Always allow the blade to reach full speed before beginning a cut. Feed the material slowly and steadily. Never force the saw.

4.2 Miter Saw Function

The miter saw function allows for precise cross-cuts and miter cuts. Adjust the miter angle by loosening the locking knob, setting the desired angle (-45°/0°/+45°), and re-tightening the knob. For bevel cuts, adjust the saw head tilt. Ensure the workpiece is firmly against the fence.

• Kapasitas Pemotongan pada 90°: Ukuran: 130x75mm
• Kapasitas Pemotongan pada 45°: Ukuran: 120x50mm
• Cutting Capacity at 2 x 45° (Compound Miter): Ukuran: 70x35mm

Figure 3: Adjusting the miter angle for precise cuts.

4.3 Table Saw Function

To use the saw as a table saw, lock the saw head in the upright position. Adjust the cutting height (0–40 mm) using the height adjustment mechanism. Use the parallel fence for rip cuts and the push stick for feeding smaller workpieces. The table surface measures 416 x 352 mm.

Figure 4: Adjusting the cutting height for table saw operation.

4.4 Ekstraksi Debu

The saw is equipped with a dust funnel behind the saw blade for improved sawdust collection. Connect a suitable dust extractor to the dust port to maintain a clean work environment and improve visibility during operation.

Figure 5: Dust extraction port for connecting a vacuum system.

5. Pemeliharaan

Regular maintenance ensures the longevity and safe operation of your saw.

• Pembersihan: After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air. Do not use solvents that could damage plastic parts.
• Inspeksi Pisau: Regularly inspect the saw blade for sharpness, cracks, or missing teeth. Replace dull or damaged blades immediately.
• Guard Functionality: Ensure all guards move freely and return to their protective positions.
• Pelumasan: Apply a light coat of machine oil to moving parts as recommended in the full manual (if applicable).
• Kabel Daya: Check the power cord for damage. Do not use the saw if the cord is frayed or cut.

6. Penyelesaian masalah

Bagian ini membahas masalah umum yang mungkin Anda alami. Untuk masalah yang tidak tercantum di sini, hubungi dukungan pelanggan.

7. Spesifikasi Teknis

8. Garansi dan Dukungan

8.1 Garansi

This Einhell product comes with a Garansi 2 tahun from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in material and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear.

8.2 Dukungan Pelanggan

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer support. You can find contact information on the official Einhell websitus atau melalui pengecer lokal Anda.

Weblokasi: www.einhell.com

Please have your model number (4300345) and serial number (if applicable) ready when contacting support.