Makita B-35097 Impact Gold Ultra Magnetic Torsion Insert Bit Holder

Perkenalan

This manual provides instructions for the safe and effective use of the Makita B-35097 Impact Gold Ultra Magnetic Torsion Insert Bit Holder. This accessory is designed for use with impact drivers, offering enhanced durability and bit retention for various fastening applications.

Informasi Keselamatan

Pedoman Keselamatan Umum

• Always wear appropriate personal protective equipment (PPE), including safety glasses, when operating power tools.
• Ensure the bit holder is securely inserted into the impact driver chuck before operation.
• Use only with compatible insert bits.
• Do not modify the bit holder.
• Jauhkan tangan dan pakaian longgar dari bagian yang berputar.
• Store the bit holder in a dry, safe place away from children.

Produk Selesaiview

Komponen dan Fitur

The Makita B-35097 Impact Gold Ultra Magnetic Torsion Insert Bit Holder is engineered for demanding applications, providing superior bit retention and durability.

This image shows the Makita B-35097 Impact Gold Ultra Magnetic Torsion Insert Bit Holder, highlighting its robust construction and design.

Fitur Utama:

• Ultra Magnetic Tip: Features a rare-earth neodymium magnet, which is 2 times stronger than standard insert bit holder magnets, ensuring superior bit retention.
• Xtreme Torsion Technology: The 2-piece design allows the torsion section of the bit holder to flex under load, reducing pressure on the bit tip for increased durability in high-torque applications.
• High-Quality Steel Construction: Manufactured from high-quality steel, specifically designed for use with impact drivers.
• Kompatibilitas dengan Impact Driver: Exclusively designed for high-torque impact drivers.
• Panjang: Approximately 3 inches (79 mm) total length.

Pengaturan

Persiapan untuk Penggunaan

1. Pilih Bit yang Benar: Choose an insert bit compatible with the Makita Impact Gold system and suitable for your specific application.
2. Insert Bit into Holder: Push the desired insert bit firmly into the magnetic end of the B-35097 bit holder until it is securely seated. The strong magnet will hold the bit in place.
3. Insert Holder into Impact Driver: Insert the hexagonal shank of the B-35097 bit holder into the chuck of your impact driver. Ensure it is fully engaged and locked into position according to your impact driver's instructions.

Petunjuk Pengoperasian

Using the Bit Holder

1. Benda Kerja yang Aman: Selalu amankan benda kerja Anda untuk mencegah pergerakan selama pengoperasian.
2. Align Bit: Position the bit tip onto the fastener head, ensuring proper alignment to prevent cam-out.
3. Terapkan Tekanan: Apply firm, steady pressure to the impact driver, keeping it straight and aligned with the fastener.
4. Engage Driver: Activate the impact driver. The torsion technology in the bit holder will absorb impact forces, extending the life of both the bit and the fastener.
5. Remove Bit Holder: After use, release the bit holder from the impact driver chuck. Remove the insert bit from the holder by pulling it firmly.

Pemeliharaan

Perawatan dan Penyimpanan

• Pembersihan: Wipe the bit holder clean with a dry cloth after each use to remove dust and debris. Do not use solvents or harsh chemicals.
• Inspeksi: Regularly inspect the bit holder for any signs of wear, damage, or deformation. Discontinue use if damage is observed.
• Penyimpanan: Store the bit holder in a dry environment to prevent rust. Keep it away from strong magnetic fields that could affect other sensitive equipment.

Penyelesaian Masalah

Masalah Umum

• Mata Bor Tidak Terpasang dengan Aman:
  Larutan: Ensure the insert bit is fully seated. Check if the magnetic tip is clean and free of metal shavings. If the magnet's strength appears significantly reduced, the bit holder may need replacement.
• Bit Holder Wobbles in Driver:
  Larutan: Verify that the hexagonal shank is fully inserted and locked into the impact driver's chuck. Refer to your impact driver's manual for proper chuck engagement.
• Premature Bit Wear:
  Larutan: Ensure you are using the correct type and size of insert bit for the application. Apply adequate, consistent pressure during operation. The Impact Gold torsion technology is designed to mitigate this, but extreme misuse can still cause wear.

Spesifikasi

Data Teknis

Garansi dan Dukungan

Informasi Produsen

For warranty information and customer support regarding your Makita B-35097 Impact Gold Ultra Magnetic Torsion Insert Bit Holder, please refer to the official Makita website or contact your local Makita dealer. Keep your purchase receipt as proof of purchase.

Official Makita Weblokasi: www.makita.com