MVMT Hive Lightweight Aluminum Portable Wireless Bluetooth Speaker

Perkenalan

Terima kasih sudah membeliasing the MVMT Hive Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. Please read it thoroughly before use to ensure optimal performance and longevity of your device.

Isi Paket

Pastikan semua item ada dalam paket:

• 1 x MVMT Hive Bluetooth Speaker
• 1 x Kabel Tambahan
• 1 x Kabel Pengisian Daya Mikro USB
• 1 x Panduan Pengguna (dokumen ini)

Image: A silver MVMT Hive portable Bluetooth speaker, showcasing its compact, cylindrical design and aluminum body, alongside its included auxiliary and micro USB cables.

Mengisi Daya Speaker

1. Cari port pengisian daya Micro USB pada speaker.
2. Connect the Micro USB end of the provided charging cable to the speaker's charging port.
3. Hubungkan ujung USB standar kabel ke adaptor daya USB (tidak termasuk) atau port USB komputer.
4. Lampu indikator pengisian daya akan menyala, biasanya berwarna merah, untuk menunjukkan bahwa speaker sedang diisi daya.
5. A full charge takes approximately 3-4 hours. The indicator light will change or turn off once charging is complete.
6. A fully charged speaker provides up to 6 hours of playtime in Bluetooth wireless mode.

Pairing Bluetooth

Follow these steps to connect your MVMT Hive speaker to a Bluetooth-enabled device:

1. Pastikan speaker terisi penuh.
2. Nyalakan speaker dengan menekan dan menahan tombol daya. Speaker akan memasuki mode pemasangan Bluetooth, yang ditunjukkan oleh lampu LED yang berkedip.
3. Pada perangkat seluler Anda (smartphone, tablet, komputer), aktifkan Bluetooth dan cari perangkat yang tersedia.
4. Select "MVMT Hive" from the list of found devices.
5. Once paired, the speaker will emit an audible confirmation tone, and the LED indicator will typically stop flashing and remain solid.
6. You can now play audio from your device through the MVMT Hive speaker.

Note: The speaker will automatically attempt to reconnect to the last paired device when powered on, if that device's Bluetooth is active and within range.

Operasi Mode AUX

To use the speaker with devices that do not support Bluetooth, use the auxiliary (AUX) input:

1. Connect one end of the provided 3.5mm auxiliary cable to the AUX input port on the MVMT Hive speaker.
2. Connect the other end of the 3.5mm auxiliary cable to the headphone jack or AUX output of your audio device.
3. The speaker should automatically switch to AUX mode. If not, ensure no Bluetooth connection is active.
4. Atur volume pada perangkat audio dan speaker Anda untuk mendapatkan suara yang optimal.

Penyelesaian Masalah

Pemeliharaan dan Perawatan

• Jauhkan speaker dari air, kelembapan, dan suhu ekstrem.
• Jangan biarkan speaker terkena sinar matahari langsung dalam waktu lama.
• Bersihkan speaker dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut abrasif.
• Hindari menjatuhkan atau membiarkan speaker terkena benturan keras.
• When not in use for a long time, charge the speaker at least once every three months to maintain battery health.

Spesifikasi

Garansi dan Dukungan

Untuk informasi garansi atau dukungan teknis, silakan merujuk ke dokumentasi yang diberikan pada saat pembelian atau hubungi pengecer Anda. Simpan bukti pembelian Anda untuk klaim garansi.