Technical Precision IKOLUX AJ24

Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb User Manual

Model: IKOLUX AJ24

Perkenalan

This manual provides essential information for the safe and effective use of your Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb. Please read these instructions carefully before installation and retain them for future reference. This bulb is a replacement component and is not manufactured by ZEISS.

Informasi Keselamatan

  • Keamanan Listrik: Always disconnect power to the fixture before installing or replacing the bulb to prevent electric shock.
  • Penanganan: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling. Avoid touching the glass part of the bulb with bare hands, as oils can cause hot spots and reduce bulb life. Use a clean cloth or gloves.
  • Kesesuaian: Ensure the replacement bulb's voltage (22V) dan wattage (150W) match the requirements of your ZEISS IKOLUX AJ24 fixture.
  • Pembuangan: Buang bohlam bekas sesuai dengan peraturan setempat.

Produk Selesaiview

The Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb is a high-efficiency halogen bulb designed for specific equipment requiring the IKOLUX AJ24 model. It features a GY6.35 base and a T4 tubular shape.

Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, front view

Gambar 1: Depan view of the Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb. This image shows the clear glass bulb with its internal filament and two-pin GY6.35 base.

Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, angled view

Gambar 2: Sudut view of the Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, highlighting the tubular shape and pin connectors.

Pengaturan dan Instalasi

  1. Matikan: Ensure the power supply to the ZEISS IKOLUX AJ24 fixture is completely disconnected before proceeding.
  2. Pendinginan: If replacing an existing bulb, allow it to cool down completely before touching.
  3. Lepaskan Bohlam Lama: Carefully remove the old bulb from its socket. Note its orientation if applicable.
  4. Handle New Bulb: Using a clean cloth or gloves, carefully unpackage the new Technical Precision replacement bulb. Avoid touching the glass with bare hands.
  5. Masukkan Bohlam Baru: Align the two pins of the GY6.35 base with the socket in the fixture. Gently push the bulb into place until it is securely seated. Do not force the bulb.
  6. Pulihkan Daya: Setelah bohlam terpasang dengan aman, kembalikan aliran listrik ke perlengkapan tersebut.
  7. Tes: Turn on the fixture to confirm the new bulb is functioning correctly.
Close-up of the GY6.35 base pins on the replacement bulb

Gambar 3: Close-up view of the GY6.35 base pins, illustrating the connection points for installation.

Petunjuk Pengoperasian

This replacement bulb operates as a direct substitute for the original ZEISS IKOLUX AJ24 bulb. Operation is controlled by the host fixture's power switch or control system. No special operating procedures are required for the bulb itself.

  • Langsung Aktif: The bulb provides instant illumination upon activation.
  • Efisiensi Tinggi: Designed for high efficiency, providing optimal light output for its wattage.

Pemeliharaan

  • Pembersihan: If the bulb's glass surface becomes dirty, ensure the power is off and the bulb is cool. Gently wipe with a clean, dry, lint-free cloth. Do not use liquid cleaners.
  • Inspeksi: Periodically inspect the bulb for any signs of damage or wear. If the bulb appears damaged, replace it immediately.
  • Penggantian: The bulb has an estimated operating life of 50 hours. Replace the bulb when it reaches the end of its life or if its performance degrades.
Samping view of the replacement bulb, showing the glass material

Gambar 4: Samping view of the replacement bulb, showcasing its glass construction and tubular shape.

Penyelesaian Masalah

MasalahKemungkinan PenyebabLarutan
Bohlam tidak menyala.
  • Tidak ada daya ke perlengkapan.
  • Bola lampu tidak terpasang dengan benar.
  • Bola lampu rusak atau sudah habis masa pakainya.
  • Fixture issue.
  • Periksa catu daya dan pemutus arus.
  • Ensure bulb pins are fully inserted into the socket.
  • Ganti bohlam dengan yang baru.
  • Consult the fixture's manual or a qualified technician.
Bohlam berkedip.
  • Koneksi longgar.
  • Jil.tage. fluktuasi.
  • Lampu sudah hampir habis masa pakainya.
  • Pastikan bohlam terpasang dengan aman.
  • Periksa stabilitas catu daya.
  • Ganti bohlam.
Bohlam cepat terbakar.
  • over-voltage.
  • Frequent switching.
  • Getaran yang berlebihan.
  • Oils/residue on glass.
  • Verifikasi volume perlengkapantage lampu bohlam (22V).
  • Minimize frequent on/off cycles.
  • Ensure fixture is stable.
  • Handle bulb with a clean cloth or gloves during installation.

Spesifikasi

Merek:Presisi Teknis
Nama Model:IKOLUX AJ24
Jenis Lampu:Halogen
Apatage:150 Watt
Jil.tage:22 Volt
Basis Bohlam:GY6.35
Ukuran Bentuk Bohlam:T4 (Tabung)
Suhu Warna:3300 Kelvin
Masa Operasi:50 Jam
Bahan:Kaca
Fitur Khusus:High Efficiency, Instant On

Informasi Garansi

Produk ini dilengkapi dengan Garansi produsen 1 tahun. For warranty claims or details, please contact Technical Precision directly. The warranty covers defects in materials and workmanship under normal use.

Mendukung

For further assistance, technical support, or inquiries regarding the Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, please visit the official Technical Precision store or contact their customer service.

Technical Precision Store: Kunjungi Toko di Amazon

© 2024 Technical Precision. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.