Good Earth Lighting BO1065-WHG-06LF6-E

Ecolight 6-inch LED Motion Utility Light

Model: BO1065-WHG-06LF6-E | Brand: Good Earth Lighting

Perkenalan

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ecolight Battery-Operated 6-inch LED Dual Lens Motion Utility Light. Please read this manual thoroughly before using the product to ensure proper function and safety.

Informasi Keselamatan

  • Pastikan baterai dimasukkan dengan polaritas yang benar.
  • Jangan mencampur baterai lama dan baru, atau jenis baterai yang berbeda.
  • Remove batteries if the light will not be used for an extended period.
  • This product is designed for dry locations only. Avoid exposure to water or high humidity.
  • Jauhkan dari jangkauan anak-anak.

Isi Paket

Verifikasi bahwa semua komponen tersedia sebelum instalasi:

  • 1 x Ecolight 6-inch LED Motion Utility Light
  • 3 x Baterai AA (termasuk)
  • 4 x Small Damage-Free Picture Hanging Command Strips by 3M
Ecolight 6-inch LED Motion Utility Light packaging showing contents
Figure 1: Product packaging illustrating the included components.

Pengaturan dan Instalasi

The Ecolight Motion Utility Light is designed for easy, flexible, and damage-free mounting using the included 3M Command Strips. No wiring is required.

Langkah 1: Siapkan Lampu

  1. Lepaskan penutup belakang lampu.
  2. Locate and remove the clear plastic tab from the battery compartment. This activates the included AA batteries.
  3. Pasang kembali penutup belakang.
Atas view of the Ecolight 6-inch LED Motion Utility Light
Gambar 2: Atas view of the light, showing the motion sensor and light lenses.

Langkah 2: Siapkan Permukaan Pemasangan

  • Choose a clean, dry, and smooth surface for mounting.
  • Clean the surface with rubbing alcohol and a clean cloth. Allow it to dry completely. Do not use household cleaners.

Step 3: Apply Command Strips

  1. Separate the two interlocking strips from each pair.
  2. Firmly press two strips together until they click. Repeat for all four strips.
  3. Remove the green liner from one side of each paired strip.
  4. Apply these strips to the designated flat areas on the back of the light. Press firmly.
  5. Remove the remaining liner from the exposed side of each strip.

Step 4: Mount the Light

  • Align the light with the prepared surface.
  • Press the light firmly against the surface for 30 seconds to ensure strong adhesion.
Ecolight 6-inch LED Motion Utility Light installed under a kitchen cabinet
Figure 3: The utility light installed under a cabinet, providing illumination.

For a visual guide on installation and removal, please refer to the official product video:

Video 1: Official installation and removal guide for the Ecolight Motion Utility Light. This video demonstrates the steps for setting up and safely removing the light using Command Strips.

Petunjuk Pengoperasian

The Ecolight Motion Utility Light features motion-activated operation and an auto-off timer for energy efficiency.

  • Aktivasi Gerakan: The integrated 100-degree Passive Infrared (PIR) sensor detects motion up to 12 feet away. The light will only activate when it is dark and motion is detected, conserving battery life.
  • Timer Mati Otomatis: After the light activates and no further motion is detected, it will automatically turn off after 30 seconds.

Pemeliharaan

Penggantian Baterai

When the light output diminishes, it is time to replace the batteries.

  1. Carefully remove the light from its mounting surface. If using Command Strips, follow the removal instructions (pull tab straight down slowly).
  2. Lepaskan penutup belakang lampu.
  3. Replace the three (3) AA batteries with new ones, ensuring correct polarity (+/-).
  4. Pasang kembali penutup belakang.
  5. Re-mount the light using new Command Strips if necessary, following the installation steps.

The light is rated for 52 hours of illumination on a full battery charge.

Penyelesaian Masalah

Masalah Kemungkinan Penyebab Larutan
Lampu tidak menyala. Baterai mati atau tidak terpasang dengan benar. Ganti baterai, pastikan polaritasnya benar.
Lampu menyala pada siang hari. Sensor is detecting insufficient ambient light. Ensure the light is installed in an area that is sufficiently dark for motion activation.
Light does not detect motion reliably. Sensor obstructed or outside detection range. Clear any obstructions from the sensor. Ensure motion occurs within 12 feet and 100 degrees of the sensor.
Lampu mati terlalu cepat. No continuous motion detected within 30 seconds. This is normal operation. The light is designed to turn off after 30 seconds of no detected motion to conserve battery life.

Spesifikasi

  • Nomor Model: BO1065-WHG-06LF6-E
  • Ukuran: 6 x 2.5 x 1.1 inci (L x W x H)
  • Berat Barang: 6.4 ons
  • Sumber Daya: Battery powered (3 x AA batteries, included)
  • Jil.tage: 4.5 Volt (DC)
  • Apatage: 6 watt
  • Jenis Bohlam: DIPIMPIN
  • Fluks Bercahaya: 80 lumens
  • Suhu Warna: 4000K (Bright, neutral white light)
  • Sensor Gerak: 100-degree PIR sensor, detects motion up to 12 ft.
  • Timer Mati Otomatis: 30 seconds (after no motion detected)
  • Lamp Kehidupan: Hingga 30,000 jam
  • Daya Tahan Baterai: Approximately 52 hours of illumination on a full charge
  • Metode Instalasi: Wall-mounted (with included 3M Command Strips)
  • Penggunaan: Lokasi Kering Saja
  • Bahan: Plastik
  • Warna: Putih

Jaminan

This Ecolight Motion Utility Light comes with a Garansi terbatas 6 tahun. For details regarding warranty coverage and claims, please refer to the product packaging or contact Good Earth Lighting customer support.

Mendukung

For further assistance, technical support, or inquiries, please contact Good Earth Lighting customer service. Contact information can typically be found on the product packaging or the manufacturer's official weblokasi.

Pabrikan: Pencahayaan Bumi yang Baik

Weblokasi: Good Earth Lighting Store on Amazon

© 2024 Good Earth Lighting. Semua hak dilindungi undang-undang.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.