Makita DLX2157TJ1 18V Brushless Hammer Drill and Angle Grinder Combo Kit

1. Petunjuk Keselamatan Penting

Selalu perhatikan tindakan pencegahan keselamatan dasar saat menggunakan peralatan listrik untuk mengurangi risiko kebakaran, sengatan listrik, dan cedera pribadi. Baca semua petunjuk sebelum mengoperasikan produk ini.

• Keselamatan Area Kerja: Jaga area kerja Anda tetap bersih dan terang. Area yang berantakan atau gelap dapat menyebabkan kecelakaan. Jangan mengoperasikan perkakas listrik di lingkungan yang mudah meledak, seperti di dekat cairan, gas, atau debu yang mudah terbakar.
• Keamanan Listrik: Hindari kontak tubuh dengan permukaan yang dibumikan atau ditanahkan seperti pipa, radiator, kompor, dan lemari es. Risiko sengatan listrik meningkat jika tubuh Anda dibumikan atau ditanahkan.
• Keamanan Pribadi: Always wear eye protection. Use appropriate safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection when necessary. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts.
• Penggunaan dan Perawatan Alat: Jangan memaksakan penggunaan alat listrik. Gunakan alat listrik yang tepat untuk aplikasi Anda. Alat tersebut akan bekerja lebih baik dan lebih aman pada kecepatan yang dirancang untuknya. Cabut steker dari sumber daya dan/atau baterai dari alat listrik sebelum melakukan penyesuaian apa pun, mengganti aksesori, atau menyimpan alat listrik.
• Penggunaan dan Perawatan Alat Baterai: Isi ulang hanya dengan pengisi daya yang ditentukan oleh pabrikan. Pengisi daya yang sesuai untuk satu jenis baterai dapat menimbulkan risiko kebakaran saat digunakan dengan baterai lain. Gunakan perkakas listrik hanya dengan paket baterai yang dirancang khusus.

2. Isi Paket

The Makita DLX2157TJ1 combo kit includes the following items:

• Makita DHP481 18V Brushless Hammer Drill Driver
• Makita DGA504 18V Brushless Angle Grinder
• 3 x Makita BL1850B 18V 5.0Ah Li-ion Batteries
• Makita DC18RC Rapid Charger
• Side Handle for Hammer Drill
• Side Handle for Angle Grinder
• Grinding Wheel Guard
• Roda penggiling
• Makita MAKPAC Type 3 Connector Case
• Instruction Manuals for each tool

Image: The complete Makita DLX2157TJ1 combo kit, showcasing the hammer drill, angle grinder, three 5.0Ah 18V batteries, a charger, and the MAKPAC Type 3 connector case.

3. Produk Lebihview

3.1 Makita DHP481 18V Brushless Hammer Drill Driver

The DHP481 is a powerful 18V cordless hammer drill driver featuring a brushless motor for increased efficiency and longer tool life. It offers two mechanical gears, variable speed control, and a hammer function for drilling into masonry. The ergonomic design ensures comfortable use.

3.2 Makita DGA504 18V Brushless Angle Grinder

The DGA504 is an 18V cordless angle grinder equipped with a brushless motor, providing high power and extended run time. It features an automatic speed control that adjusts the cutting speed according to the load condition, and an anti-restart function for user safety.

4. Pengaturan

4.1 Pengisian Baterai

1. Connect the DC18RC Rapid Charger to a suitable power outlet.
2. Insert the 18V Li-ion battery pack into the charger. Ensure it clicks into place.
3. The charger's indicator light will show the charging status. A full charge is indicated when the light changes (refer to charger manual for specific light patterns).
4. Setelah terisi penuh, keluarkan baterai dari pengisi daya.

4.2 Attaching Accessories to DHP481 Hammer Drill

1. Ensure the battery pack is removed from the drill.
2. Memasang Pegangan Samping: Screw the side handle into the designated threaded hole on the front of the drill. Tighten securely.
3. Installing Drill Bits: Rotate the chuck counter-clockwise to open the jaws. Insert the drill bit fully into the chuck. Rotate the chuck clockwise to tighten the jaws securely around the drill bit. Ensure the bit is centered and firmly held.

4.3 Attaching Accessories to DGA504 Angle Grinder

1. Ensure the battery pack is removed from the grinder.
2. Memasang Pegangan Samping: Screw the side handle into one of the two threaded holes on the grinder head. Choose the position that offers the best control for your application. Tighten securely.
3. Cara Memasang Pelindung Roda: Position the wheel guard over the spindle housing. Ensure it is securely fitted and adjusted to protect against sparks and debris. Tighten any securing screws or levers.
4. Installing Grinding/Cutting Wheels: Press the spindle lock button. Place the inner flange onto the spindle. Place the grinding or cutting wheel onto the inner flange. Screw the outer flange (nut) onto the spindle and tighten it firmly using the provided wrench. Release the spindle lock.

5. Petunjuk Pengoperasian

5.1 Operating the DHP481 Hammer Drill Driver

1. Pemasangan Baterai: Slide a charged battery pack into the base of the drill until it clicks into place.
2. Pemilihan Mode:
   • Mode Bor: Rotate the mode ring to the drill symbol for general drilling.
   • Mode Bor Palu: Rotate the mode ring to the hammer drill symbol for drilling into masonry.
   • Mode Obeng: Rotate the mode ring to the screwdriver symbol. Adjust the torque ring to the desired setting (1-21) for driving screws.
3. Pemilihan Kecepatan: Use the gear selector switch on top of the drill to choose between high speed (2) and low speed (1).
4. Operasi: Hold the drill firmly with both hands (using the side handle for better control). Press the trigger switch to start the drill. The speed is variable depending on how far the trigger is pressed. Apply steady, even pressure.
5. Membalikkan Rotasi: Use the forward/reverse lever located above the trigger to change the direction of rotation.

5.2 Operating the DGA504 Angle Grinder

1. Pemasangan Baterai: Slide a charged battery pack into the base of the grinder until it clicks into place.
2. Memulai Penggiling: Ensure the work area is clear. Hold the grinder firmly with both hands (using the side handle). Slide the lock-off button (if present) and then press the paddle switch or slide switch to start the grinder.
3. Penggilingan/Pemotongan: Allow the wheel to reach full speed before contacting the workpiece. Apply light, even pressure. Do not force the tool. Maintain a stable stance and keep the wheel guard between you and the workpiece as much as possible.
4. Menghentikan Mesin Penggiling: Release the paddle switch or slide switch. Wait for the wheel to come to a complete stop before setting the tool down.
5. Automatic Speed Control: The grinder automatically adjusts its speed and torque during operation based on the load, optimizing performance.

6. Pemeliharaan

Perawatan rutin memastikan kinerja optimal dan memperpanjang umur peralatan Anda.

• Pembersihan: After each use, clean the tools with a soft cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear.
• Perawatan Baterai: Simpan baterai di tempat yang sejuk dan kering, jauhkan dari sinar matahari langsung. Jangan menyimpan baterai yang benar-benar kosong dalam waktu lama. Isi daya baterai secara berkala jika tidak digunakan.
• Inspeksi: Regularly inspect the power cords (if applicable for charger), switches, and housing for any damage. Check that all screws are tight.
• Inspeksi Aksesori: Inspect drill bits, grinding wheels, and guards for wear or damage before each use. Replace worn or damaged accessories immediately.
• Motor Tanpa Sikat: These tools feature brushless motors, eliminating the need for carbon brush replacement.

7. Penyelesaian masalah

8. Spesifikasi

• Nomor Model: DLX2157TJ1
• Merek: Makita
• Jil.tage: 18 Volt
• Komposisi Baterai: Litium-Ion
• Baterai Ampera: 5 Ampere (5.0Ah)
• Hammer Drill Driver (DHP481): Brushless Motor, 2-speed, Hammer function
• Angle Grinder (DGA504): Brushless Motor, Automatic Speed Control, Anti-restart function
• Pengisi daya: DC18RC Rapid Charger
• Kasus: MAKPAC Type 3 Connector Case
• GTIN/UPC: 088381819114
• ASIN: B01MXRRJFS

9. Garansi dan Dukungan

Makita power tools are manufactured under strict quality control standards. This product is covered by Makita's standard warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Makita weblokasi.

For technical support, service, or spare parts, please contact your local authorized Makita service center or dealer. You can find contact information on the official Makita weblokasi: www.makita.com