Carbest 145773197

Carbest 12V Water Pump Instruction Manual

Modelnya: 145773197

1. Pendahuluan

Thank you for choosing the Carbest 12V Water Pump. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your pump. Please read this manual thoroughly before use and retain it for future reference.

This 12V pressure water pump features a robust construction designed for a long service life. It operates with a cut-off pressure of 2.8 bar and delivers a flow rate of 10 liters per minute. The pump incorporates a 3-compartment membrane system for reliable performance.

2. Petunjuk Keselamatan

  • Always disconnect power before installing, servicing, or performing any maintenance on the pump.
  • Ensure the power supply matches the pump's rated voltage (12VDC).
  • Do not operate the pump with flammable liquids. This pump is designed for water only.
  • Lindungi pompa dari suhu beku.
  • Ensure proper ventilation around the pump to prevent overheating.
  • Use appropriate wiring and fuses for the rated current (7.5A) to prevent electrical hazards.
  • Install the pump in a dry location, protected from direct water spray.

3. Pengaturan dan Instalasi

3.1 Membongkar

Carefully remove the pump and all components from the packaging. Inspect for any damage that may have occurred during transit. Do not use if damaged.

3.2 Pemasangan

Mount the pump in a secure, dry location. The pump can be mounted horizontally or vertically. Ensure the mounting feet are firmly attached to a stable surface to minimize vibration and noise.

Carbest 12V water pump showing mounting feet

Gambar: Samping view of the Carbest 12V water pump, highlighting the four integrated mounting feet designed for secure installation.

3.3 Sambungan Pipa

Connect the inlet and outlet pipes to the pump. For optimal operation, use pipes with an inner diameter of 12 mm or more. Ensure all connections are tight to prevent leaks.

  • Masuk: Connect the water supply line to the inlet port. The pump includes a pre-filter that should be installed on the inlet side to protect the pump from debris.
  • Toko: Connect the discharge line to the outlet port.
Carbest 12V water pump with pre-filter and electrical connections

Image: The Carbest 12V water pump, showing the integrated pre-filter on the inlet side and the red and black wires for electrical connection.

Close-up of the Carbest water pump pre-filter

Gambar: Detail view of the transparent pre-filter assembly, showing the mesh screen inside, which prevents debris from entering the pump.

Dasar view of Carbest water pump showing threaded connections

Image: Bottom perspective of the Carbest water pump, illustrating the threaded inlet and outlet ports for plumbing connections.

3.4 Sambungan Listrik

Connect the pump to a 12V DC power source. The red wire is for the positive (+) terminal, and the black wire is for the negative (-) terminal. Ensure correct polarity. It is recommended to install an inline fuse appropriate for the pump's rated current (7.5A) to protect the electrical circuit.

4. Operasi

4.1 Priming Pompa

Before initial operation, ensure the pump is primed. Open a faucet or valve on the discharge side to allow air to escape. Turn on the power to the pump. The pump will begin to draw water and expel air. Once a steady flow of water is achieved, the pump is primed. Close the faucet/valve, and the pump will shut off automatically when the cut-off pressure is reached.

4.2 Operasi Otomatis

The Carbest 12V water pump is designed for automatic operation. It will turn on when a demand for water is detected (e.g., opening a faucet) and turn off when the demand ceases and the system pressure reaches the cut-off point (2.8 bar).

4.3 Flow Rate

The pump provides a flow rate of 10 liters per minute. Actual flow may vary depending on system pressure, pipe diameter, and elevation.

5. Pemeliharaan

5.1 Pembersihan Pra-filter

Regularly inspect and clean the pre-filter to ensure optimal pump performance and prevent damage from debris. To clean:

  1. Putuskan sambungan daya ke pompa.
  2. Unscrew the transparent housing of the pre-filter.
  3. Remove the mesh screen and rinse it thoroughly under clean water.
  4. Reassemble the pre-filter, ensuring the O-ring is properly seated to prevent leaks.
  5. Reconnect power and check for leaks.
Close-up of the Carbest water pump pre-filter for cleaning

Gambar: Close-up view of the transparent pre-filter, indicating the component that requires regular cleaning to maintain pump efficiency.

5.2 Musim dingin

If the pump will be exposed to freezing temperatures, it must be drained completely to prevent damage. Disconnect the inlet and outlet lines and allow all water to drain from the pump. Store in a dry, frost-free environment.

6. Penyelesaian masalah

MasalahKemungkinan PenyebabLarutan
Pompa tidak menyala.No power; Blown fuse; Loose wiring; Motor fault.Check power supply; Replace fuse; Secure connections; Contact support.
Pompa menyala tetapi tidak ada air yang mengalir.Air in system (not primed); Clogged inlet/filter; Low water supply; Leaks in suction line.Prime the pump; Clean pre-filter; Check water source; Inspect and seal suction lines.
Aliran atau tekanan rendah.Clogged filter; Partially closed valve; Small pipe diameter; Air in system.Clean pre-filter; Open all valves; Ensure 12mm+ pipe diameter; Re-prime pump.
Pompa sering menyala dan mati.Small leak in system; Pressure switch malfunction; Accumulator tank issue (if applicable).Check for leaks in plumbing; Contact support for pressure switch or accumulator issues.
Kebisingan atau getaran yang berlebihan.Loose mounting; Debris in pump; Air in system.Secure mounting feet; Clean pump (if accessible); Prime the pump.

7. Spesifikasi Teknis

FiturDetil
Nomor Model145773197
MerekCarbest
Nilai VoltageTegangan DC 12V
Nilai Arus7.5A
Laju Aliran10 Liter Per Menit
Cut-off Pressure2.8 batang
Sistem Pompa3-Compartment Membrane
Recommended Pipe Inner Diameter12 mm atau lebih
Dimensi (P x L x T)Ukuran 20.3x13x12.3 cm
Berat2.04 Kilogram
BahanPlastik, Baja Tahan Karat

8. Informasi Garansi

Carbest products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your purchase or contact your retailer. The warranty typically covers manufacturing defects under normal use conditions.

Please note: Damage caused by improper installation, misuse, neglect, freezing, or unauthorized modifications is not covered under warranty.

9. Dukungan Pelanggan

For technical assistance, spare parts, or warranty claims, please contact your authorized Carbest dealer or the point of purchase. When contacting support, please have your product model number (145773197) and purchase date available.

You may also visit the official Carbest websitus untuk sumber daya tambahan dan informasi kontak.

© 2025 Carbest. Seluruh hak cipta dilindungi undang-undang.

Manual ini dapat berubah tanpa pemberitahuan.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.