Schellenberg 70988

Schellenberg 70988 Basic Window Mosquito Screen 120 x 140 cm Instruction Manual

Perkenalan

This manual provides detailed instructions for the assembly, installation, and maintenance of your Schellenberg Basic Window Mosquito Screen, model 70988. This kit is designed to protect your home from insects while allowing fresh air circulation. It features a high-quality fiberglass fabric and a robust aluminum frame, suitable for various window types, including those with roller shutters.

Petunjuk Keselamatan

  • Always read and understand all instructions before beginning assembly or installation.
  • Use appropriate safety gear, such as gloves, when handling tools and materials.
  • Jauhkan komponen kecil dari jangkauan anak-anak untuk mencegah bahaya tersedak.
  • Pastikan area kerja bersih dan cukup terang.
  • Jangan memodifikasi produk dengan cara apa pun yang tidak dijelaskan dalam manual ini.

Isi Paket

Harap pastikan bahwa semua komponen yang tercantum di bawah ini ada dalam paket Anda:

  • 4 x Aluminum profiles for the clampbingkai
  • 1 x Fiberglass mosquito net fabric
  • 4 x Corner connectors
  • 4 x Corner connection caps
  • 4 x Stainless steel suspension springs
  • 2 x Piping handles
  • 4 x Piping beads
  • 1 x Brush seal
  • 1 x Instruksi perakitan
Diagram showing the components of the mosquito screen kit: aluminum profiles, corner connectors, mesh, handles, and piping.
Diagram showing the components of the mosquito screen kit: aluminum profiles, corner connectors, mesh, handles, and piping.

Pengaturan dan Perakitan

Follow these steps to assemble and install your window mosquito screen:

  1. Persiapkan Profiles: Hubungkan pro aluminiumfiles using the corner connectors to form the frame. Ensure they are securely fitted.
  2. Pasang Mesh: Lay the fiberglass mosquito net fabric over the assembled frame. Using the piping beads and a suitable tool (not included, typically a spline roller), press the fabric into the groove of the aluminum profiles. Trim any excess fabric.
  3. Attach Handles and Springs: Secure the two piping handles to the frame. Insert the stainless steel suspension springs into the designated slots on the frame.
  4. Apply Brush Seal: Integrate the brush seal into the frame. This seal helps to close any gaps between the mosquito screen and your window frame, providing enhanced protection against insects.
  5. Installation on Window: The assembled mosquito screen is designed to be hung onto the window frame using the integrated suspension springs. No drilling into your window frame is required. The slim profile (9 mm total installation depth) allows for installation even behind existing roller shutters.
A woman demonstrating the easy installation of the Schellenberg Basic Window Mosquito Screen by holding it up to a window.
A woman demonstrating the easy installation of the Schellenberg Basic Window Mosquito Screen by holding it up to a window.
Close-up of the aluminum profile with brush seal and fiberglass mesh, showing dimensions 8mm and 23mm.
Close-up of the aluminum profile with brush seal and fiberglass mesh, showing dimensions 8mm and 23mm.

Petunjuk Pengoperasian

Once installed, the mosquito screen provides continuous insect protection. To open or close your window, simply unhook the screen from the window frame using the handles and set it aside. Re-attach it when the window is in the desired position. For seasonal use, the screen can be easily removed and stored.

Pemeliharaan

  • Membersihkan Jaring: The fiberglass mesh can be cleaned with a soft brush or a damp cloth and mild soapy water. Rinse thoroughly with clean water and allow to air dry. Avoid harsh chemicals or abrasive cleaners.
  • Membersihkan Bingkai: Usap bingkai aluminium dengan adamp kain.
  • Penyimpanan: For prolonged periods of non-use (e.g., winter), remove the screen from the window and store it in a dry, protected area to extend its lifespan.

Penyelesaian Masalah

Masalah Kemungkinan Penyebab Larutan
Layar tidak pas dengan lubang jendela. Incorrect measurements or assembly. Re-measure window opening and ensure profiles are cut to correct length during assembly. Check all corner connections.
Gaps between screen and window frame. Brush seal not properly installed or damaged. Ensure the brush seal is fully seated in its groove. Replace if damaged.
Mesh is loose or sagging. Piping bead not fully inserted or has come loose. Re-insert the piping bead firmly into the profile groove using a spline roller.

Spesifikasi

Fitur Detil
Pabrikan Schellenberg
Nomor Model 70988
Dimensi Produk (P x L x T) Ukuran 120x0.8x140 cm
Berat 1.38 kilogram
Ukuran Ukuran 120x140cm
Warna Putih
Profile Ketebalan Ukuran: 23x8mm
Bahan Aluminum, Fiberglass
Penggunaan Luar ruangan
Baterai Diperlukan TIDAK
Negara Asal Cina
Diagram illustrating the dimensions of the assembled mosquito screen: 120 cm width and 140 cm height.
Diagram illustrating the dimensions of the assembled mosquito screen: 120 cm width and 140 cm height.

Garansi dan Dukungan

For warranty information, product support, or to inquire about replacement parts, please refer to the official Schellenberg websitus web atau hubungi layanan pelanggan mereka secara langsung. Simpan bukti pembelian Anda untuk klaim garansi.

Informasi Kontak:

  • Pabrikan: Schellenberg
  • Weblokasi: www.schellenberg.de (Please check for local country-specific websitus)

© 2023 Schellenberg. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.