Buku Panduan Pengguna Jump Starter Aki FLYLINKTECH

Perkenalan

Thank you for choosing the FLYLINKTECH Battery Jump Starter. This portable device is designed to provide a powerful boost to your vehicle's battery, act as a portable power bank for electronic devices, and offer an integrated LED flashlight for emergencies. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

Informasi Keselamatan

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• Jangan mencoba melakukan jump start pada baterai yang beku.
• Ensure proper polarity connection (positive to positive, negative to negative) to avoid sparks or damage.
• Jangan izinkan cl merah dan hitamamps untuk saling menyentuh.
• Jauhkan perangkat dari jangkauan anak-anak.
• Jangan biarkan perangkat terkena hujan atau suhu ekstrem.
• Simpan di tempat sejuk dan kering saat tidak digunakan.
• Jika baterai clamps are connected incorrectly, the smart cable will typically alert you with an indicator light or sound. Disconnect immediately and re-connect correctly.
• Selalu putuskan sambungan clamps from the vehicle battery first, then from the jump starter, after a successful jump start.

Isi Paket

Verifikasi bahwa semua item ada dalam paket Anda:

• FLYLINKTECH Battery Jump Starter Unit
• Kabel Jumper Pintar dengan Clamp(Merah dan Hitam)
• Kabel Pengisian Daya USB
• EC5 Car Cigarette Lighter Adapter
• User Manual (dokumen ini)

Image: The FLYLINKTECH Battery Jump Starter unit, black with red accents, shown alongside its accessories: smart jumper cables (red and black clamps), a USB charging cable, and an EC5 car cigarette lighter adapter.

Produk Selesaiview

Kenali komponen-komponen utama alat bantu starter mobil Anda:

• Tombol Daya: Activates the unit and checks battery level.
• Lampu Indikator LED: Show the remaining battery capacity (e.g., 4 lights for full charge).
• Port Jump Start: Terhubung ke kabel jumper pintar.
• Port Output USB: For charging mobile phones, tablets, and other USB-powered devices.
• Port Masukan Mikro USB: Untuk mengisi daya unit jump starter.
• Senter LED: Lampu terintegrasi untuk penerangan.

Pengaturan

Pengisian Awal

Before first use, fully charge the jump starter. It is recommended to charge the unit every 3-6 months to maintain battery health, even if not in use.

1. Connect the Micro USB end of the provided USB charging cable to the jump starter's input port.
2. Connect the USB-A end of the cable to a 5V/2A USB wall adapter (not included) or a computer USB port.
3. The LED indicator lights will flash during charging and remain solid when fully charged.

Petunjuk Pengoperasian

Langsung Memulai Kendaraan

Ensure the jump starter is at least 50% charged (at least 2 LED indicator lights are solid) before attempting a jump start.

1. Matikan kunci kontak kendaraan dan semua aksesori (lampu, radio, AC).
2. Hubungkan kabel merah (positif, +)amp of the smart jumper cables to the positive (+) terminal of the vehicle's battery.
3. Hubungkan kabel hitam (negatif, -)amp of the smart jumper cables to the negative (-) terminal of the vehicle's battery.
4. Plug the blue connector end of the smart jumper cables into the jump start port on the jump starter unit. Ensure a firm connection.
5. Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump start. If it's red or flashing, check connections and polarity.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
7. Setelah kendaraan menyala, segera lepaskan konektor biru dari unit jump starter.
8. Kemudian, lepaskan kabel hitam (-) clamp dari baterai kendaraan, diikuti oleh cl merah (+)amp.

Menggunakan sebagai Bank Daya Portabel

Alat jump starter ini dapat mengisi daya berbagai perangkat elektronik melalui port output USB-nya.

1. Hubungkan kabel pengisian daya USB perangkat Anda ke salah satu port keluaran USB pada jump starter.
2. Press the power button on the jump starter to begin charging. The LED indicator lights will show the remaining battery level.
3. Disconnect your device once charging is complete. The jump starter will automatically turn off after a period of inactivity.

Menggunakan Senter LED

The integrated LED flashlight has multiple modes for different situations.

1. Press and hold the power button for approximately 3 seconds to turn on the flashlight.
2. Press the power button again to cycle through modes: Solid light > SOS signal > Strobe light.
3. Tekan dan tahan tombol daya lagi selama 3 detik untuk mematikan senter.

Pemeliharaan

• Pengisian ulang: Recharge the unit after each jump start. For optimal battery life, recharge every 3-6 months even if not used.
• Pembersihan: Bersihkan unit dengan kain kering dan lembut. Jangan gunakan bahan kimia keras atau pembersih abrasif.
• Penyimpanan: Simpan jump starter di tempat yang sejuk dan kering, jauhkan dari sinar matahari langsung dan suhu ekstrem.

Penyelesaian Masalah

Spesifikasi

• Merek: TEKNOLOGI TERBANG
• Model: CF200
• Puncak saat ini: 1500A
• Pengoperasian Ampera: 1000 Amps
• Jenis Baterai: 12V (termasuk)
• Kompatibilitas Mesin: Up to 6.0L Gas or 5.0L Diesel engines
• Dimensi Produk: 6.22x3.35x0.83 inci
• Berat Barang: 1.7 pon
• UPC-nya: 886871087216

Note: The 1500A peak current refers to the maximum instantaneous current the unit can deliver. The operating amperage is typically lower.

Garansi dan Dukungan

FLYLINKTECH products are manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided on the product packaging or visit the official FLYLINKTECH website. Please have your model number (CF200) and purchase date ready when contacting support.