EPEVER Tracer1210AN MPPT Solar Charge Controller User Manual

1. Pendahuluan

The EPEVER Tracer1210AN MPPT Solar Charge Controller is designed to efficiently manage power from your solar panels to charge batteries. It features advanced Maximum Power Point Tracking (MPPT) technology, ensuring high tracking efficiency of over 99.5%. This controller supports 12V and 24V battery systems automatically and can handle a maximum PV input voltage of 100V. It is compatible with various battery types, including sealed lead-acid, gel, flooded, and lithium batteries. The built-in LCD screen displays key charging parameters, and multiple connectivity options allow for personalized settings and monitoring via remote meter, mobile app, or PC software.

2. Fitur Produk

The Tracer1210AN controller integrates several features for optimal performance and user interaction.

EPEVER Tracer1210AN MPPT Solar Charge Controller front view dengan label — **Gambar 2.1:** Depan view of the EPEVER Tracer1210AN MPPT Solar Charge Controller. This image highlights the LCD display, Select and Enter buttons, mounting holes, and connection terminals for the temperature sensor, solar panel, battery, and load.

Layar LCD: Shows real-time operating data and fault information.
Tombol Pilih: Used to navigate through different display interfaces.
Tombol Masuk: Used to confirm selections or enter settings menus.
Lubang pemasangan: For secure installation of the controller.
Temperature Sensor Port: Connects the Remote Temperature Sensor (RTS) for accurate battery temperature compensation.
Solar Panel Terminals: Connects to the solar panel array.
Terminal Baterai: Menghubungkan ke bank baterai.
Load Terminals: Terhubung ke beban DC.
COM Port (RS485): For communication with accessories like the MT50 remote meter, PC software, or mobile app.

EPEVER Tracer1210AN MPPT Solar Charge Controller side view showing heat sink — **Gambar 2.2:** Samping view of the EPEVER Tracer1210AN MPPT Solar Charge Controller, illustrating the aluminum alloy heat sink. This design ensures efficient heat dissipation, allowing the controller to operate at full load without capacity drop within its working environment temperature range.

3. Pengaturan dan Instalasi

Proper installation is crucial for the safe and efficient operation of your solar charge controller. Follow these steps carefully.

3.1 Unboxing dan Komponen

Before installation, ensure all components are present and undamaged. The package typically includes the Tracer1210AN controller, an MT50 remote meter, a Remote Temperature Sensor (RTS), and an RS485 PC communication cable.

EPEVER Tracer1210AN MPPT Solar Charge Controller and accessories — **Gambar 3.1:** Contents of the EPEVER Tracer1210AN package, including the solar charge controller, MT50 remote meter, remote temperature sensor, and USB to RS485 communication cable.

3.2 Diagram Pengkabelan

Connect the components in the specified order to prevent damage. The connection order is: Battery → Solar Panel → Load. The disassembly order is the reverse: Load → Solar Panel → Battery.

Wiring diagram for EPEVER Tracer1210AN MPPT Solar Charge Controller — **Gambar 3.2:** A typical wiring diagram showing the connection of the solar panel, battery, and various DC and AC loads (via an inverter) to the EPEVER Tracer1210AN MPPT Solar Charge Controller.

3.3 Communication Ports and Accessories

The controller features various ports for enhanced monitoring and control.

EPEVER Tracer1210AN MPPT Solar Charge Controller communication ports — **Gambar 3.3:** Jarak dekat view of the EPEVER Tracer1210AN MPPT Solar Charge Controller, highlighting the Remote Temperature Sensor (RTS) connection and the RJ45 communication port. This port allows connection to accessories like the MT50 remote meter, PC via USB-RS485 cable, or mobile app via OTG cable.

Remote Temperature Sensor (RTS): Connect the RTS300R47K3.81A to the designated port for accurate battery temperature compensation. The standard cable length is 3m.
Port Komunikasi RS485: This RJ45 port allows connection to various accessories for monitoring and parameter setting.

3.4 Langkah Instalasi

Mount the controller securely using the provided mounting holes.
Connect the battery to the controller's battery terminals. Ensure correct polarity.
Connect the solar panel to the controller's solar panel terminals. Ensure correct polarity.
Connect the DC loads to the controller's load terminals. Ensure correct polarity.
Connect the temperature sensor probe to the controller.

Penting: Selalu sambungkan baterai terlebih dahulu, kemudian panel surya, dan terakhir beban. Lepaskan sambungan dengan urutan terbalik.

3.5 Video: Unboxing and Installation

Watch this video for a visual guide on unboxing and installing the EPEVER Tracer-AN controller and its accessories.

Klip 3.1: An instructional video demonstrating the unboxing and installation process for the EPEVER Tracer-AN MPPT Solar Charge Controller, including connections for the solar panel, battery, and load, and the temperature sensor.

4. Petunjuk Pengoperasian

This section covers basic operation and how to configure essential settings on your controller.

4.1 Manual Control Mode

The controller supports manual control of the load. Press the 'ENTER' button to toggle the load on or off.

4.2 Setting the Battery Type

It is essential to set the correct battery type for optimal charging and battery longevity. The controller supports various battery types including Sealed (default), Gel, Flooded, and different Lithium battery configurations.

Table of EPEVER Tracer series product parameters — **Gambar 4.1:** Table showing various battery types supported by the controller, including Sealed (default), Gel, Flooded, LiFePO4 (3.2V) in 4PCS or 8PCS series, and Li(NiCoMn)O2 (3.7V) in 3PCS, 6PCS, or 7PCS series, along with a user-defined option.

Untuk mengatur jenis baterai:

Press and hold the 'ENTER' button for 5 seconds when the battery voltage interface is displayed.
Press the 'SELECT' button when the battery type interface is flashing to cycle through available battery types.
Press the 'ENTER' button to confirm your selection.

4.3 Setting the Load Mode

The load working mode determines how the connected DC loads operate. Options include Light ON/OFF, various timer settings, test mode, and manual mode.

To set the load mode:

Press and hold the 'ENTER' button for 5 seconds when the load mode interface is displayed.
Press the 'SELECT' button when the load mode interface is flashing to cycle through available modes.
Press the 'ENTER' button to confirm your selection.

5. Spesifikasi

Below are the technical specifications for the Tracer1210AN MPPT Solar Charge Controller.

EPEVER Tracer1210AN Specifications
Parameter	Value (Tracer1210AN)
Nominal Sistem Voltage	12 / 24VDC Otomatis
Arus Pengisian Terukur	10A
Dinilai Debit Saat Ini	10A
Vol bateraitage Rentang	Tegangan 8~32V
Maks. PV Sirkuit Terbuka Voltage	100V (pada suhu lingkungan 25°C)
MPP Jilidtage Rentang	Vol bateraitage +2V ~ 72V
Daya Masukan PV Maks.	130W/12V, 260W/24V
Konsumsi sendiri	≤12mA
Sirkuit Discharge Voltage Jatuhkan	≤0.23V
Temperature Compensate	-3mV/°C/2V (Bawaan)
Pembumian	Negatif Umum
Antarmuka RS485	5VDC / 100mA
Waktu Lampu Latar LCD	60S (Bawaan)

6. Aksesoris

The EPEVER Tracer1210AN controller is often bundled with or compatible with several accessories to enhance its functionality.

Meter Jarak Jauh MT50: This remote meter can display various operating data and fault information. It features easy-to-operate buttons and a clear numeric display. It is used for monitoring and setting controller parameters.

Pengukur Jarak Jauh EPEVER MT-50 — **Gambar 6.1:** The MT50 Remote Meter, used for monitoring and configuring the solar charge controller.

Remote Temperature Sensor (RTS300R47K3.81A): Acquires battery temperature for accurate temperature compensation of control parameters. The standard length of the cable is 3m.
USB to RS485 Cable (CC-USB-RS485-150U): Used to connect the controller to a PC for monitoring and setting parameters via Solar Station PC software. The cable length is 1.5m.

EPEVER Remote Temperature Sensor and RS485 to USB cable — **Gambar 6.2:** The Remote Temperature Sensor (RTS) and the USB to RS485 communication cable.

OTG Cable (OTG-12CM): Used to connect a mobile communication cable to achieve real-time monitoring and parameter modification via a mobile APP.
WiFi Serial Adapter (eBox-WiFi-01): Allows monitoring and setting parameters via mobile APP software through WiFi signals.
RS485 to Bluetooth Adapter (eBox-BLE-01): Enables monitoring and setting parameters via mobile APP software through Bluetooth signals.
Logger (eLOG01): Records the operating status of the controller for later review.

7. Penyelesaian masalah

If you encounter issues with your EPEVER Tracer1210AN controller, refer to the following common troubleshooting tips:

Tidak ada Tampilan pada LCD: Periksa sambungan baterai dan pastikan tegangan bateraitage berada dalam jangkauan operasi.
Tanpa Pengisian: Verify solar panel connections and ensure sufficient sunlight. Check for any shading on the solar panels. Confirm the battery type setting is correct.
Beban Tidak Berfungsi: Check load connections and ensure the load mode is set correctly (e.g., Manual ON, Light ON/OFF). Verify that the battery voltage berada di atas vol rendahtage disconnect threshold.
Pembacaan Suhu Tidak Akurat: Ensure the Remote Temperature Sensor (RTS) is properly connected and positioned near the battery.
Masalah Komunikasi: Check the RS485 cable connections to the remote meter, PC, or adapter. Ensure drivers are installed for PC communication.

For more detailed troubleshooting, consult the full product manual or contact EPEVER customer support.

8. Pemeliharaan

Regular maintenance helps ensure the longevity and optimal performance of your solar charge controller.

Kebersihan: Jaga agar kontroler tetap bersih dan bebas dari debu dan kotoran. Gunakan kain kering untuk membersihkannya.
Koneksi: Periksa secara berkala semua sambungan kabel untuk memastikan kekencangan dan tidak ada korosi. Sambungan yang longgar dapat menyebabkan panas berlebih dan kerusakan.
Ventilasi: Ensure adequate airflow around the controller to facilitate heat dissipation. Do not block the heat sink fins.
Kesehatan Baterai: Memantau volume bateraitage and health regularly. Ensure the battery type setting on the controller matches your battery.
Pembaruan Firmware: Periksa pabrikannya webKunjungi situs ini untuk melihat pembaruan firmware yang tersedia guna meningkatkan kinerja atau menambahkan fitur baru.

9. Garansi dan Dukungan

EPEVER products are designed for reliability and performance. For warranty information and technical support, please refer to the official EPEVER websitus atau hubungi distributor lokal Anda.

You can also visit the official iSunergy store on Amazon for product information and support: iSunergy Amazon Store.