ARMOR LINE UPS 600VA / 360W User Manual

1. Pendahuluan

This manual provides essential information for the safe and efficient operation of your ARMOR LINE UPS 600VA / 360W Battery Backup & Surge Protector with Automatic Voltage Regulation (AVR). Please read this manual thoroughly before installation and use, and retain it for future reference.

2. Petunjuk Keselamatan

• Jangan membuka kotak UPS.asing. Tidak ada bagian dalam yang dapat diservis pengguna.
• Do not expose the UPS to direct sunlight, excessive heat, or humidity.
• Pastikan ventilasi di sekitar unit baik. Jangan halangi lubang ventilasi.
• Hubungkan UPS hanya ke stopkontak yang diarde.
• Do not connect appliances with high power consumption (e.g., laser printers, heaters) to the UPS battery backup outlets.
• In case of emergency, press the power button to turn off the UPS and disconnect it from the power source.

3. Produk Lebihview

The ARMOR LINE UPS provides reliable battery backup and surge protection for your electronic devices. It features Automatic Voltage Regulation (AVR) to stabilize incoming power without draining the battery, extending battery life and ensuring consistent power delivery.

Depan view of the ARMOR LINE UPS, showing the power button and the LCD display. The display indicates Input Voltage (180 VAC), AC Mode, Output Voltage (212 VAC), Battery Level, and Load Level.

Fitur Utama:

• AVR Boost and Buck: Automatically corrects under-voltage atau over-voltagkondisi tanpa menggunakan daya baterai.
• Fungsi Mulai Dingin: Allows the UPS to power on using battery power without utility connection.
• Smart USB Interface: For real-time power monitoring and automatic shutdown capabilities.
• Built-in Self-Diagnostic Function: Executes automatically upon power-on or via software control.
• Modem/LAN Internet Generator Set: Protects network connections from spikes or surges.
• Faster Charging Capacity: Recharges to 90% in 6-8 hours.
• Auto Charging at Off Mode: Battery charges continuously even when the UPS is off.
• Fungsi Restart Otomatis: UPS automatically restarts when utility power recovers.

4. Pengaturan

4.1 Membongkar

Buka kemasan UPS dengan hati-hati dan periksa apakah ada kerusakan akibat pengiriman. Jika ditemukan kerusakan, jangan operasikan unit dan hubungi dealer Anda.

4.2 Penempatan

• Place the UPS in a clean, dry, and well-ventilated area.
• Avoid placing the UPS near heat sources or in direct sunlight.
• Ensure there is adequate space (at least 2 inches) around all sides of the UPS for proper airflow.

4.3 Pengisian Awal

Before initial use, connect the UPS to a standard wall outlet and allow it to charge for at least 8 hours. This ensures the battery is fully charged and ready to provide optimal backup power.

4.4 Perangkat Penghubung

1. Plug the UPS power cord into a grounded wall outlet.
2. Connect your computer, monitor, and other critical electronic devices to the battery backup outlets on the rear of the UPS. These outlets provide both surge protection and battery backup.
3. For devices that only require surge protection (e.g., printers, scanners), use the surge-only outlets if available.
4. Connect the USB cable from the UPS to your computer for power management software functionality (if applicable).
5. For network protection, connect your modem/router to the UPS using the provided Modem/LAN protection ports.

5. Petunjuk Pengoperasian

5.1 Menghidupkan/Mematikan

• Untuk menghidupkan: Tekan dan tahan tombol daya pada panel depan selama kurang lebih 3 detik hingga Anda mendengar bunyi bip dan layar LCD menyala.
• Untuk mematikan: Press and hold the power button for approximately 3 seconds until you hear a beep and the LCD display turns off.

5.2 Indikator Tampilan LCD

The LCD display provides real-time status information about the UPS. Refer to the image in Section 3 for a visual guide.

• INPUT VAC: Menampilkan tegangan utilitas yang masuktage.
• MODE AC: Indicates that the UPS is operating on utility power.
• OUTPUT VAC: Menampilkan volumetage yang dipasok oleh UPS ke perangkat yang terhubung.
• BATT. LEVEL: Menunjukkan tingkat pengisian daya baterai internal saat ini.
• TINGKAT BEBAN: Menunjukkan persentage dari kapasitas UPS yang digunakan oleh perangkat yang terhubung.

5.3 Fungsi Mulai Dingin

The Cold Start function allows you to power on the UPS and connected devices using only battery power, even when there is no utility power available. To activate, ensure the UPS is off and not connected to utility power, then press and hold the power button for approximately 5 seconds. The UPS will power on and supply battery power to the outlets.

5.4 Smart USB Interface

Connect the UPS to your computer via the USB port to enable power management features. This allows for real-time monitoring of UPS status, automatic shutdown of your computer during extended power outages, and configuration of various settings. Refer to the software documentation for detailed instructions.

6. Pemeliharaan

6.1 Perawatan Baterai

• To maximize battery life, keep the UPS connected to a wall outlet at all times to ensure the battery remains fully charged.
• The UPS features Auto Charging at Off Mode, meaning the battery will continue to charge even when the unit is powered off, as long as it is connected to utility power.
• If the UPS is stored for an extended period, recharge the battery every three months to prevent permanent damage.

6.2 Self-Diagnostic Function

The UPS performs a self-diagnostic test automatically upon power-on. This test checks the internal components and battery status. If an issue is detected, an alarm may sound, and an error code might be displayed on the LCD. Refer to the Troubleshooting section for common error codes.

6.3 Pembersihan

To clean the exterior of the UPS, use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the unit or create a shock hazard.

6.4 Penggantian Baterai

The battery in your UPS is designed for a specific lifespan. When the battery reaches the end of its life, it should be replaced by qualified service personnel. Contact Armor support or a certified technician for battery replacement services. Do not attempt to replace the battery yourself.

7. Penyelesaian masalah

This section addresses common issues you might encounter with your ARMOR LINE UPS. If the problem persists after following these steps, contact customer support.

8. Spesifikasi

9. Garansi dan Dukungan

For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Armor websitus. Simpan struk pembelian Anda sebagai bukti pembelian untuk klaim garansi.