Komisi Pemberantasan Korupsi (KPK)amPower POE Combiner Splitter Adapter Instruction Manual

1. Pendahuluan

Komisi Pengawas Persaingan Usaha (KPPU)amPower POE Combiner Splitter Adapter is designed to simplify the installation of IP cameras by allowing two cameras to share a single Ethernet cable run. This innovative solution reduces cabling costs and installation time, making it ideal for both new and existing surveillance system setups. It is compatible with all standard 802.3af/at POE switches, POE NVRs, and POE IP cameras, supporting both Mode A and Mode B POE pinouts for maximum flexibility.

Figure 1: IPCamPower POE Combiner Splitter Adapter Kit, including the combiner unit, splitter unit, and weatherproof connectors.

2. Isi Paket

Harap verifikasi bahwa semua item ada dalam paket Anda:

• 1 x Combiner Unit
• 1 x Splitter Unit
• Weatherproof Grommets (for Splitter Unit)

3. Fitur Utama

• Cable Cost Reduction: Allows two IP cameras to operate over a single Ethernet cable, significantly reducing cabling requirements and installation costs.
• Kompatibilitas Luas: Works seamlessly with all standard 802.3af/at POE switches, POE NVRs, and POE IP cameras.
• Mode A and B POE Support: Features a dual toggle switch to ensure compatibility with both Mode A and Mode B POE pinout types.
• Desain Tahan Cuaca: The Splitter Unit is equipped with IP68-rated weatherproof RJ45 connectors, allowing for outdoor exposure to various weather elements including rain, sleet, snow, ice, and sun.
• Pasang dan Mainkan Sederhana: Designed for straightforward installation without complex configuration.
• Instalasi yang Efisien: Ideal for scenarios where two cameras are located in close proximity, eliminating the need for a second long cable run back to the network switch or NVR.

4. Pengaturan dan Instalasi

Follow these steps to set up your POE Combiner Splitter Adapter:

1. Identifikasi Satuan: The set consists of a sender "Combiner" unit and a receiver "Splitter" unit. The Combiner unit typically has two short Ethernet cables with RJ45 connectors, while the Splitter unit has two short cables with weatherproof connectors.
2. Connect Combiner: Plug the two RJ45 connectors from the Combiner unit into two open POE ports on your POE switch or POE NVR.
3. Run Single Cable: Connect a single, long Ethernet cable (Cat5e or Cat6 recommended) from the Combiner unit to the location where your two IP cameras are situated.
4. Connect Splitter: At the camera location, plug the long Ethernet cable into the input of the Splitter unit.
5. Hubungkan Kamera: Connect two short Ethernet cables from the outputs of the Splitter unit to your two IP cameras. Ensure all connections are secure.
6. Adjust POE Mode (if necessary): The Combiner unit features a dual toggle switch (Mode A and Mode B). If your POE switch or NVR uses a specific pinout mode and the cameras are not powering on, adjust this switch to the alternative mode to ensure compatibility.

Figure 2: Conceptual diagram illustrating the connection of two cameras to a single cable run using the Combiner and Splitter units.

Gambar 3: Kompatibilitas di atasview, highlighting the broad support for IP cameras, POE NVRs, and POE switches.

Panduan Video Instalasi

5. Operasi

Komisi Pengawas Persaingan Usaha (KPPU)amPower POE Combiner Splitter Adapter operates on a plug-and-play principle. Once correctly installed and connected to a compatible POE source and IP cameras, it will automatically combine and split the Power over Ethernet (POE) and data signals. No additional software or configuration is required for its basic operation.

6. Pemeliharaan

The POE Combiner Splitter Adapter is designed for durability and requires minimal maintenance. The Splitter Unit features an IP68 rating, providing excellent protection against dust and water ingress, making it suitable for outdoor environments.

• Pembersihan: Periodically wipe down the units with a soft, dry cloth to remove any dust or debris. Avoid using harsh chemicals or abrasive cleaners.
• Pemeriksaan Koneksi: Ensure all Ethernet connections remain secure, especially in outdoor installations where environmental factors might affect them.
• Weatherproof Connectors: For outdoor installations, ensure the weatherproof RJ45 connectors on the Splitter Unit are properly tightened to maintain their IP68 rating.

Figure 4: The Splitter Unit is designed with IP68 weatherproof capabilities, ensuring reliable performance in various outdoor conditions.

7. Penyelesaian masalah

If you encounter issues with your POE Combiner Splitter Adapter, consider the following:

• No Power to Cameras:
  • Verify that the POE switch or NVR ports are active and providing power.
  • Periksa semua sambungan kabel Ethernet untuk memastikan terpasang dengan benar dan kokoh.
  • Ensure the POE Mode A/B switch on the Combiner unit is set correctly for your POE source. Try switching modes if unsure.
  • Confirm that your cameras are POE compatible and within the power budget of your POE source.
• Tidak Ada Koneksi Data:
  • Inspect all Ethernet cables for damage. Try replacing cables if suspected.
  • Ensure the RJ45 connectors are fully inserted into the ports.
  • Check network settings on your cameras and NVR/switch.
• Koneksi Intermiten:
  • Ensure the long cable run is not exceeding recommended lengths for Ethernet (typically 100 meters or 328 feet).
  • Verify cable quality (Cat5e or Cat6 recommended).
  • Check for external interference or loose connections.

8. Spesifikasi

Figure 5: Detailed dimensions of the Combiner and Splitter units for planning installation space.