Panduan Pengguna Osiloskop Penyimpanan Digital Hantek DSO2D10

1. Pendahuluan

This manual provides essential information for the safe and effective operation of your Hantek DSO2D10 Digital Storage Oscilloscope. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.

Figure 1: Hantek DSO2D10 Digital Storage Oscilloscope

2. Informasi Keselamatan

Always observe the following safety precautions to prevent injury and avoid damage to the instrument or any products connected to it.

• Sumber Daya: Use only the power cord specified for this instrument. Ensure the power supply voltage berada dalam rentang yang ditentukan.
• Pembumian: The instrument must be properly grounded. Do not defeat the grounding conductor of the power cord.
• Keamanan Pemeriksaan: Ensure probes are correctly connected and rated for the voltage being measured. Do not touch exposed connections or components when power is applied.
• Lingkungan: Operate the instrument in a well-ventilated area. Do not operate in wet or damp conditions, or in explosive atmospheres.
• Pemeliharaan: Serahkan semua perbaikan kepada teknisi servis yang berkualifikasi. Jangan mencoba memperbaiki instrumen sendiri.

3. Produk Lebihview

3.1 Fitur Utama

• Features 2 independent channels with dedicated knob control.
• 100 MHz analog bandwidth and 1 GSa/s real-time samptingkat ling.
• Equipped with a 7-inch TFT LCD screen, 800x480 pixels, displaying 16 million colors (24-bit true color).
• Integrated 25 MHz signal generator, supporting arbitrary waveform burst output and modulation waveform output.
• Capable of saving parameters, waveforms, reference waveforms, CSV, and images.
• Includes 5-digit digital voltmeter and 6-digit hardware frequency counter functions.
• Large storage depth of 8Mpts to minimize waveform distortion and restore real waveforms.

3.2 Deskripsi Fisik

The Hantek DSO2D10 is designed for portability and ease of use. Below are various viewperangkat.

Figure 2: Front, Rear, and Side Views

The device measures approximately 318mm in width, 140mm in depth, and 150mm in height, making it compact for various applications.

Figure 3: Oscilloscope Dimensions

3.3 Identifikasi Komponen

Familiarize yourself with the main components and controls of the oscilloscope.

Gambar 4: Tata Letak Panel Depan

• Layar LCD: 7-inch TFT screen for waveform display and menu navigation.
• Tombol Opsi (F1-F6): Context-sensitive function buttons.
• Executive Control Buttons: Buttons for various functions like Menu, Utility, Cursor, Display, Acquire, etc.
• Kontrol Vertikal: VOLTS/DIV knobs and POSITION knobs for Channel 1 (CH1) and Channel 2 (CH2).
• Kontrol Horizontal: SEC/DIV knob and POSITION knob for time base adjustment.
• Tingkat Pemicu: Knob to adjust the trigger level.
• Masukan Saluran Analog (CH1, CH2): Konektor BNC untuk input probe.
• External Trigger Input (EXT TRIG/GEN OUT): BNC connector for external trigger or signal generator output.
• Antarmuka USB: Untuk transfer data dan pembaruan firmware.
• Saklar daya: Untuk menghidupkan atau mematikan perangkat.

4. Pengaturan

4.1 Pembongkaran dan Pemeriksaan

Carefully remove the oscilloscope from its packaging. Inspect the device for any signs of damage during transit. Retain the packaging for future storage or shipping.

4.2 Sambungan Daya

1. Pastikan sakelar daya dalam posisi OFF.
2. Connect the provided power cable to the power input on the rear panel of the oscilloscope.
3. Colokkan ujung kabel daya lainnya ke stopkontak AC yang memiliki ground.

4.3 Kompensasi Probe

Before taking measurements, it is crucial to compensate your oscilloscope probes to ensure accurate readings. This process adjusts the probe's capacitance to match the oscilloscope's input impedance.

1. Connect a probe to Channel 1 (CH1) input.
2. Connect the probe tip to the probe compensation output (usually a square wave test point on the front panel) and the ground clip to the ground terminal.
3. Turn on the oscilloscope. A square wave should appear on the screen.
4. Using a small screwdriver, adjust the compensation screw on the probe body until the square wave displayed on the screen has flat tops and bottoms with no overshoot or undershoot.
5. Repeat for other probes and channels as necessary.

5. Petunjuk Pengoperasian

5.1 Menghidupkan/Mematikan

Press the Power Switch located on the front panel to turn the oscilloscope ON or OFF.

5.2 Tampilan Bentuk Gelombang Dasar

1. Connect a signal source to CH1 using a compensated probe.
2. Sesuaikan VOL/DIV knob for CH1 to set the vertical scale.
3. Sesuaikan DETIK/DIV knob to set the horizontal (time) scale.
4. Sesuaikan POSISI knobs (vertical and horizontal) to center the waveform on the screen.
5. Sesuaikan TINGKAT PEMICU knob until a stable waveform is displayed.

5.3 Pengukuran Otomatis

The DSO2D10 supports 32 types of automatic measurements, simplifying waveform analysis.

Figure 5: Automatic Measurement Display

Untuk mengakses pengukuran otomatis, tekan tombol UKURAN button and use the option buttons (F1-F6) to select desired parameters such as Frequency, Period, Peak-to-Peak Voltage, RMS Voltage, etc. The results will be displayed on the screen.

5.4 Fungsi Generator Sinyal

The built-in 25 MHz signal generator can output various waveforms. Connect the EXT TRIG/GEN OUT BNC connector to your circuit under test.

1. Tekan tombol TERBURUK button or navigate through the menu to access the signal generator settings.
2. Select the desired waveform type (e.g., sine, square, arbitrary).
3. Sesuaikan parameter seperti frekuensi, amplitude, and duty cycle using the corresponding controls or menu options.

5.5 Penyimpanan dan Pengambilan Data

The oscilloscope features an 8Mpts storage depth, allowing for detailed waveform capture and analysis. You can save and recall various data types.

Figure 6: Waveform Storage Depth

To save data, press the SAVE/TO USB button and follow the on-screen prompts to save parameters, waveforms, or screenshots to internal memory or a connected USB drive.

5.6 Digital Voltmeter and Frequency Counter

The DSO2D10 includes integrated 5-digit digital voltmeter (DVM) and 6-digit hardware frequency counter functions for precise measurements.

Figure 7: Dual DVM and Frequency Counter

These functions can be accessed via the KEGUNAAN or UKURAN menus, providing real-time digital readouts of voltage dan frekuensi.

6. Pemeliharaan

6.1 Pembersihan

Bersihkan instrumen secara teratur dengan kain lembut,amp cloth. Do not use abrasive cleaners or solvents that could damage the casing atau layar. Pastikan perangkat dimatikan dan dicabut dari stopkontak sebelum dibersihkan.

6.2 Kalibrasi

The oscilloscope is factory calibrated. For continued accuracy, periodic calibration by qualified service personnel is recommended, especially after significant temperature changes or prolonged use.

6.3 Penyimpanan

When not in use, store the oscilloscope in a dry, dust-free environment, away from direct sunlight and extreme temperatures. Use the original packaging for long-term storage if available.

7. Penyelesaian masalah

This section addresses common issues you might encounter with the Hantek DSO2D10.

8. Spesifikasi

The following table details the technical specifications of the Hantek DSO2D10 Digital Storage Oscilloscope.

For a comparison with other models, refer to the table below:

Gambar 8: Tabel Perbandingan Model

9. Garansi dan Dukungan

For warranty information and technical support, please refer to the official Hantek webKunjungi situs web atau hubungi distributor lokal Anda. Simpan struk pembelian Anda sebagai bukti pembelian.

Pabrikan: Hantek