YOUSHARES HyperX QuadCast Microphone Boom Arm Instruction Manual

1. Pendahuluan

The YOUSHARES HyperX QuadCast Microphone Boom Arm is designed to provide flexible and stable positioning for your microphone, enhancing audio quality by minimizing desk vibrations and allowing precise placement. This manual provides detailed instructions for setting up, operating, and maintaining your boom arm.

2. Apa saja yang termasuk?

Paket ini mencakup komponen-komponen berikut:

• Suspension Boom Arm
• Tabel Pemasangan Clamp
• Microphone Adapter (3/8" to 5/8")
• Filter Pop
• Cable Sleeves (x2)

3. Petunjuk Penyiapan

1. Attach Table Mounting Clamp: Amankan C-clamp to the edge of your desk or tabletop. Ensure the sponge padding is between the clamp and your desk to prevent scratches. Tighten the screw firmly until the clamp is stable. The clamp supports surfaces up to 1.8 inches thick.

   

   For a visual guide on clamp installation, refer to the video below:

2. Masukkan Lengan Boom: Slide the base of the suspension boom arm into the hole on the table mounting clamp.
3. Pasang Mikrofon: Screw the microphone adapter (if needed) onto the boom arm's microphone connector. Then, attach your HyperX QuadCast microphone to the adapter. Ensure all connections are secure.

   

   For a quick guide on microphone installation, watch the video below:

4. Pasang Filter Pop: Clamp the pop filter onto the boom arm and position it in front of your microphone. The flexible gooseneck allows for precise adjustment.
5. Manajemen Kabel: Use the provided cable sleeves to route your microphone cable along the boom arm. This helps maintain a tidy workspace and prevents cable interference.

   

   

4. Petunjuk Pengoperasian

The boom arm offers extensive adjustability to suit your needs:

• Penyesuaian Sudut: The arm can be moved up and down 180 degrees, and rotated 360 degrees. Use the arm adjustment knobs to secure the desired angle.
• Posisi Mikrofon: The microphone connector allows for 270-degree rotation, enabling you to fine-tune the microphone's direction.
• Stabilitas: Ensure all adjustment knobs are tightened once the desired position is achieved to prevent sagging or movement.

5. Pemeliharaan

• Periksa semua sekrup dan klem secara berkala.ampuntuk memastikan semuanya terpasang dengan kencang dan aman.
• Wipe the boom arm with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals.
• Inspect cable sleeves for wear and tear and replace if necessary to maintain cable organization.

6. Penyelesaian masalah

• Boom Arm Sagging: Ensure the table mounting clamp is securely tightened to the desk. Verify that the microphone's weight does not exceed the maximum load capacity of 1.4 kg (3.1 lb).
• Microphone Instability: Check that the microphone adapter and the microphone itself are firmly screwed onto the boom arm. Tighten any loose adjustment knobs on the arm.
• Cables Tangling: Re-route cables through the provided cable sleeves and ensure they are properly secured to prevent tangling during adjustments.

7. Spesifikasi

8. Garansi dan Dukungan

For warranty information or technical support, please contact YOUSHARES customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.