Luminous NXG+ 1625 Inverter System User Manual

1. Pendahuluan dan Selesaiview

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Luminous NXG+ 1625 Inverter system. This system includes one Luminous NXG+ 1625 Inverter, two LPTT 12150H Batteries, and two 330W Solar Panels, designed to provide reliable power backup and solar energy utilization.

Please read this manual thoroughly before attempting any installation or operation. Keep it for future reference.

2. Petunjuk Keselamatan

Informasi Keselamatan Penting: Failure to follow these instructions may result in electric shock, fire, serious injury, or death. Always consult a qualified electrician for installation.

• Bahaya Listrik: This system operates with high voltage and current. Do not open the inverter casing or attempt repairs yourself.
• Keamanan Baterai: Batteries contain corrosive acid and produce explosive gases. Ensure proper ventilation. Wear protective eyewear and gloves when handling batteries. Do not smoke or allow open flames near batteries.
• Keamanan Panel Surya: Solar panels generate electricity when exposed to light. Cover panels during installation to prevent electric shock.
• Pembumian: Ensure all components are properly grounded according to local electrical codes.
• Lingkungan: Install the system in a dry, well-ventilated area, away from direct sunlight, heat sources, and flammable materials.
• Anak-anak dan Hewan Peliharaan: Jauhkan sistem dari jangkauan anak-anak dan hewan peliharaan.

3. Isi Paket

Verifikasi bahwa semua komponen ada dan tidak rusak saat dibuka kemasannya:

• 1 x Luminous NXG+ 1625 Inverter
• 2 x Luminous LPTT 12150H Battery
• 2 x Luminous 330W Solar Panel
• User Manual (dokumen ini)
• Kartu Garansi

4. Produk Lebihview

The Luminous NXG+ 1625 system is an integrated solar power solution. Below is an image of the main components.

Figure 1: Luminous NXG+ 1625 Inverter, LPTT 12150H Battery, and 330W Solar Panel. This image displays the primary components of the solar power system, including the inverter unit, two batteries, and two solar panels.

4.1. Luminous NXG+ 1625 Inverter

The inverter converts DC power from the batteries and solar panels into AC power for your home appliances. It features a pure sine wave output for sensitive electronics and intelligent solar charge control.

4.2. Luminous LPTT 12150H Battery

These are deep cycle tubular batteries designed for long power backup duration and efficient charging from solar panels. Two batteries are included for increased capacity.

4.3. Luminous 330W Solar Panel

The two 330W solar panels capture sunlight and convert it into DC electricity, which is then used to charge the batteries and power the inverter.

5. Pengaturan dan Instalasi

Instalasi Profesional Direkomendasikan: Due to the complexity and electrical hazards involved, it is strongly recommended that a certified Luminous technician or qualified electrician performs the installation.

5.1. Pemilihan Lokasi

• Pembalik: Choose a dry, well-ventilated, and easily accessible location, away from direct sunlight and moisture. Ensure adequate clearance for air circulation.
• Baterai: Place batteries in a well-ventilated area, preferably on a dedicated battery trolley or stand, away from living spaces due to gas emissions.
• Panel surya: Install panels on a south-facing (in the Northern Hemisphere) or north-facing (in the Southern Hemisphere) roof or ground mount, free from shading throughout the day. Ensure proper tilt angle for maximum sun exposure.

5.2. Wiring Connections (Overview)

Bagian ini memberikan gambaran umumview. Refer to the detailed wiring diagrams provided with the product packaging for precise connections.

1. Koneksi Baterai: Connect the two LPTT 12150H batteries in series or parallel as specified by the inverter's voltage requirements (typically 24V for this model). Ensure correct polarity (+ to + and - to - for parallel, or + to - for series). Connect the battery bank to the inverter's battery terminals.
2. Koneksi Panel Surya: Connect the two 330W solar panels in series or parallel to achieve the optimal voltage and current for the inverter's solar charge controller. Connect the combined solar array to the inverter's solar input terminals.
3. Sambungan Masukan AC: Connect the inverter's AC input to your main utility power supply (grid).
4. Koneksi Keluaran AC: Connect the inverter's AC output to your home's load distribution board or specific appliances.
5. Pembumian: Ensure the inverter chassis, battery rack, and solar panel frames are properly grounded to an earth electrode.

Peringatan: Double-check all connections before powering on the system. Incorrect wiring can cause severe damage to the equipment and pose a fire hazard.

6. Petunjuk Pengoperasian

6.1. Penyalaan Awal

1. Pastikan semua koneksi aman dan benar.
2. Turn on the main AC input breaker to the inverter.
3. Turn on the DC breaker from the solar panels (if applicable).
4. Turn on the battery breaker/switch (if applicable).
5. Switch on the inverter's main power button. Observe the display for status indicators.

6.2. Operasi Normal

• Modus Kotak: When utility power is available, the inverter will charge the batteries and pass through grid power to your loads.
• Pengisian Tenaga Surya: During daylight hours, the solar panels will charge the batteries. The inverter prioritizes solar charging.
• Battery Mode (Backup): Jika terjadi pemadaman listriktage, the inverter automatically switches to battery power, supplying AC power to your connected loads.
• Kelebihan muatan: If the connected load exceeds the inverter's capacity, an overload alarm may sound, and the inverter may shut down. Reduce the load and restart the inverter.

6.3. Shutting Down the System

1. Matikan tombol daya utama inverter.
2. Turn off the AC input breaker.
3. Turn off the DC breaker from the solar panels.
4. Turn off the battery breaker/switch.

7. Pemeliharaan

Regular maintenance ensures optimal performance and longevity of your Luminous system.

• Battery Maintenance (Monthly):
  • Check electrolyte levels in tubular batteries and top up with distilled water if necessary.
  • Clean battery terminals to prevent corrosion. Apply petroleum jelly if needed.
  • Ensure battery area is well-ventilated.
• Solar Panel Cleaning (Quarterly/As Needed):
  • Clean solar panels with water and a soft brush or cloth to remove dust, dirt, and debris. Avoid abrasive cleaners.
  • Ensure panels are not shaded by trees or other obstructions.
• Inverter Inspection (Annually):
  • Periksa sambungan yang longgar atau kabel yang rusak.
  • Ensure inverter ventilation openings are clear of dust and obstructions.
  • Dengarkan suara-suara yang tidak biasa.
• Pemeriksaan Kesehatan Profesional: Consider an annual inspection by a qualified technician.

8. Penyelesaian masalah

Sebelum menghubungi dukungan pelanggan,view masalah umum dan solusi berikut:

If troubleshooting steps do not resolve the issue, do not attempt further repairs. Contact Luminous customer support.

9. Spesifikasi

10. Garansi dan Dukungan

10.1. Informasi Garansi

Your Luminous NXG+ 1625 Inverter system comes with a standard manufacturer's warranty. Additionally, extended warranty plans are available:

• 1 Year Extended Warranty Plan by Onsitego
• 2 Year Extended Warranty Plan by Onsitego

Please refer to your warranty card for specific terms and conditions.

10.2. Dukungan Pelanggan

Untuk bantuan teknis, permintaan layanan, atau klaim garansi, silakan hubungi dukungan pelanggan Luminous:

Informasi Kontak Produsen:
Luminous Power Technologies Private Limited
Plot 150 Honda City Road, Sector 44, Gurugram, Haryana 122003, India

Please have your product model number (NXG+1625) and serial number ready when contacting support.