Belifu 4-Channel TENS EMS Unit Instruction Manual

1. Pendahuluan

The Belifu TENS EMS Unit is designed to provide pain management and muscle relaxation through Transcutaneous Electrical Nerve Stimulation (TENS) and Electrical Muscle Stimulation (EMS) technology. This device utilizes human body simulation technology, bioelectricity technology, and microcomputer intelligent control to simulate various massage methods such as cupping and acupuncture. It is intended for temporary relief of pain associated with sore and aching muscles in the shoulder, waist, back, neck, upper extremities (arm), and lower extremities (leg) due to strain from exercise or normal household and work activities. It is also intended for symptomatic relief of chronic, intractable pain and post-traumatic or post-surgical acute pain.

This unit features 4 independent channels, allowing for separate mode and intensity settings for each channel, and offers 24 pre-programmed massage modes with 30 intensity levels. Its compact, rechargeable design makes it convenient for use at home, in the office, or while traveling.

Figure 1: Applicable areas for the Belifu TENS EMS Unit.

2. Informasi Keselamatan

Please read all instructions and warnings carefully before using this device. Keep this manual for future reference.

• Do not use this device if you have a pacemaker, implanted defibrillator, or other implanted metallic or electronic device.
• Jangan gunakan jika Anda sedang hamil.
• Do not use on broken skin, open wounds, or over cancerous lesions.
• Consult your physician before use if you have any medical conditions, including but not limited to epilepsy, heart disease, or recent surgery.
• Jauhkan dari jangkauan anak-anak.
• Jangan gunakan saat mengemudi atau mengoperasikan mesin berat.
• Hentikan penggunaan jika Anda mengalami reaksi yang tidak diinginkan seperti iritasi kulit atau rasa tidak nyaman.

3. Isi Paket

Upon opening your Belifu TENS EMS Unit package, please ensure all items listed below are present:

• 1 x Belifu TENS EMS Unit Device
• 10 x Self-adhesive Reusable Electrode Pads (various sizes)
• 5 x Sets of Lead Wires
• 1 x Kabel Pengisian Daya USB
• 1 x Tas Penyimpanan
• 1 x Panduan Pengguna

Figure 2: Contents of the Belifu TENS EMS Unit package.

4. Perangkat Berakhirview

Familiarize yourself with the components and controls of your Belifu TENS EMS Unit:

Figure 3: Belifu TENS EMS Unit device diagram with labeled components.

• Output CH1-CH4: Ports for connecting lead wires.
• On/Off/Lock Button: Powers the device on/off and locks/unlocks the screen.
• Layar LCD: Displays mode, intensity, time, and battery status.
• Tombol CH: Switches between channels (CH1, CH2, CH3, CH4) to adjust settings independently.
• Tombol M+/M-: Selects from 24 pre-programmed massage modes.
• Tombol T: Adjusts the treatment time.
• I+/I- Buttons: Increases or decreases intensity for the selected channel.
• TENS/EMS Button: Toggles between TENS and EMS therapy types.
• Port USB Tipe-C: Untuk mengisi daya baterai lithium internal.

5. Pengaturan dan Penggunaan Awal

5.1 Mengisi Daya Perangkat

Before first use, fully charge the device. Connect the USB charging cable to the USB Type-C port on the unit and to a compatible USB power source (e.g., wall charger, power bank, or laptop USB port). The battery indicator on the LCD screen will show charging status. A full charge provides continuous use for an extended period.

5.2 Menghubungkan Bantalan Elektroda

1. Pastikan perangkat dimatikan.
2. Hubungkan kabel penghantar ke bantalan elektroda dengan cara menjepitkannya ke baut logam.
3. Plug the lead wires into the desired output channels (CH1, CH2, CH3, CH4) on the top of the device.
4. Lepaskan lapisan pelindung dari bantalan elektroda.

5.3 Menerapkan Bantalan Elektroda

Clean and dry the skin area where the pads will be applied. Place the self-adhesive electrode pads firmly onto the skin. Ensure good contact for optimal performance. The device supports 2 to 16 pads simultaneously across its 4 independent channels.

Figure 4: Proper application of electrode pads for multi-channel use.

6. Petunjuk Pengoperasian

1. Nyalakan: Press and hold the On/Off button to turn on the device. The LCD screen will illuminate.
2. Pilih Saluran: Press the 'CH' button to select the channel you wish to adjust (CH1, CH2, CH3, or CH4). The selected channel will be highlighted on the screen.
3. Pilih Modus: Use the 'M+' or 'M-' buttons to cycle through the 24 pre-programmed massage modes. Each mode offers a different sensation (e.g., cupping, acupuncture, tapping).
4. Atur Waktu: Press the 'T' button to adjust the treatment duration. The time can typically be set from 10 to 60 minutes.
5. Sesuaikan Intensitas: Use the 'I+' or 'I-' buttons to increase or decrease the intensity level for the selected channel. Start with a low intensity and gradually increase until a comfortable and effective sensation is achieved. There are 30 intensity levels.
6. TENS/EMS Selection: Press the 'TENS/EMS' button to switch between TENS and EMS therapy types if desired.
7. Fungsi Jeda: Press the 'Pause' button to temporarily stop the treatment. Press it again to resume.
8. Fungsi kunci: Press and hold the On/Off button briefly to lock the screen and prevent accidental changes during use. Repeat to unlock.
9. Matikan: After your session, press and hold the On/Off button to turn off the device.

7. Perawatan dan Penyimpanan

• Membersihkan Perangkat: Usap perangkat dengan lembut, damp kain. Jangan gunakan pembersih abrasif atau merendam perangkat di dalam air.
• Caring for Pads: After each use, place the electrode pads back onto their protective film. Store them in a cool, dry place. If the pads lose their adhesiveness, they may need to be replaced.
• Penyimpanan: Store the device and accessories in the provided storage bag to protect them from dust and damage. Keep away from extreme temperatures and direct sunlight.

8. Penyelesaian masalah

• Tidak ada sensasi: Ensure the device is powered on, pads are firmly attached to the skin, and lead wires are securely connected to both the pads and the device. Increase the intensity gradually. Check battery level.
• Bantalan Tidak Menempel: Clean the skin area thoroughly before applying pads. If pads are old, replace them with new ones.
• Perangkat Tidak Mengisi Daya: Ensure the USB cable is properly connected to both the device and the power source. Try a different USB cable or power source.
• Uneven Sensation Across Channels: Verify that the intensity levels for each channel are set correctly. Ensure all pads are making good contact with the skin.

9. Spesifikasi

10. Garansi dan Dukungan

For warranty information or technical support, please refer to the contact details provided in your product packaging or visit the official Belifu websitus. Simpan struk pembelian Anda sebagai bukti pembelian untuk klaim garansi apa pun.