SUPERNIGHT a05ad1f0-439e-460e-bab9-927232c68c22

SUPERNIGHT 24 Keys RGB LED Strip Light Wireless Dimmer Remote Controller User Manual

Perkenalan

This manual provides instructions for the SUPERNIGHT 24 Keys RGB LED Strip Light Wireless Dimmer Remote Controller. This remote is designed to control compatible RGB LED strip lights, offering various color and mode selections.

Two SUPERNIGHT 24-key RGB LED remote controllers

Image: Two SUPERNIGHT 24-key RGB LED remote controllers, showing the button layout.

Kesesuaian

This remote controller is compatible with SMD 5050, 3528, and 2835 RGB LED strip lights. It is designed for use with 4-pin light strips and DC12V power supplies only. It is not compatible with DC24V or AC200 power supplies.

Isi Paket

Paketnya meliputi:

  • 2 x 24-key RGB LED light remote controllers

Catatan: This product includes only the remote controllers. LED light strips, adapters, power supplies, or control boxes are not included.

Petunjuk Pengaturan

  1. Aktivasi Baterai: Before first use, locate the plastic insulation tab in the battery compartment of the remote controller. Pull this tab out to activate the pre-installed battery.
  2. Hubungkan Strip LED: Ensure your LED strip light is a 4-pin RGB type and uses a DC12V power supply. Connect the LED strip to its control box (not included).
  3. Align Connections: When connecting the LED strip to the adapter or control box, ensure the arrow mark on the adapter aligns precisely with the arrow mark on the LED light strip. Correct connection of positive and negative poles according to color coding is essential for proper function.
  4. Position Signal Receiver: Ensure the infrared (IR) signal receiver of your LED strip system is unobstructed and visible to the remote controller for optimal operation.
Diagram showing remote, battery tab removal, and LED strip connection with arrow alignment

Image: Illustration of removing the battery insulation tab and aligning the arrow marks during LED strip connection.

Petunjuk Pengoperasian

The 24-key remote controller provides comprehensive control over compatible RGB LED strip lights. Point the remote directly at the LED strip's IR receiver for best performance.

Fungsi Tombol:

SUPERNIGHT 24-key remote controller with button labels

Gambar: Detail view of the 24-key remote controller with labels for each button's function.

  • AKTIF/NONAKTIF: Turns the LED strip lights on or off.
  • Penyesuaian Kecerahan: Two buttons (sun icons) to increase or decrease the brightness of the lights.
  • Pemilihan Warna: 16 dedicated buttons for static colors (Red, Green, Blue, White, and various shades).
  • Mode Dinamis:
    • KILATAN: Berubah warna dengan cepat.
    • LAMPU TEMBAK: Memancarkan satu warna.
    • MEMUDAR: Transisi antar warna yang halus.
    • MULUS: Gradual color changes.

For specific color and mode combinations, refer to the table below:

Brightness (+ / Speed Up)Brightness (- / Speed Down)MatiOn
Merah StatisHijau StatisBiru StatisPutih Statis
Oranye StatisKacang Hijau StatisBiru Tua Statis7 Color Jumpy Change
Kuning Tua StatisSian StatisCoklat StatisSemua Fade Out & Fade In
Kuning StatisBiru Muda StatisMerah Muda Statis7 Perubahan Warna Pudar
Jerami Statis KuningBiru Langit StatisUngu Statis3 Base Color Jumpy
Remote controller in hand, adjusting LED strip lights behind a television

Image: A hand holding the remote controller, adjusting the color of LED strip lights installed behind a television.

Pemeliharaan

The remote controller requires minimal maintenance. Keep the device dry and clean. If the remote's performance degrades, replace the internal Lithium Ion battery. Ensure the battery is inserted with correct polarity.

Penyelesaian Masalah

  • Jarak Jauh Tidak Merespons:
    • Pastikan tab isolasi plastik telah dilepas dari kompartemen baterai.
    • Verify the remote is pointed directly at the LED strip's IR signal receiver.
    • Periksa apakah ada penghalang antara remote dan penerima.
    • Replace the battery if the remote still does not function.
  • Incorrect Color/Mode Display:
    • Confirm that the adapter arrow mark is aligned with the arrow mark on the light strip.
    • Ensure lead wires are connected correctly according to color coding (positive and negative poles).
  • No Power to LED Strip:
    • Verify that the power supply is DC12V. This product is not compatible with DC24V or AC200.
    • Confirm that the LED strip is a 4-pin type.

If issues persist after following these steps, please contact customer service for further assistance.

Spesifikasi

  • Dimensi Produk: 3.22x1.92x0.62 inci
  • Berat Barang: 1.13 ons
  • Nomor Model Barang: a05ad1f0-439e-460e-bab9-927232c68c22
  • Baterai: Diperlukan 1 baterai Lithium Ion (termasuk)
  • Merek: SUPERNIGHT
  • Fitur Khusus: Dapat disesuaikan
  • Warna: Multi
  • Jumlah Maksimum Perangkat yang Didukung: 1
  • Perangkat yang Kompatibel: RGB LED Strip Light (SMD 5050, 3528, 2835, 4-pin, DC12V)

Garansi dan Dukungan

This product comes with a one-year warranty. During this period, replacement or repair will be provided free of charge, excluding damage caused by artificial situations or overload working conditions.

For any questions or assistance, please contact our customer service. We provide 24-hour customer service and support free returns and exchanges.