LED MAJU 65636

Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual

Model: 65636 | Merek: LEDVANCE

Informasi Keselamatan Penting

  • Hanya untuk penggunaan dalam ruangan: Produk ini dirancang untuk penggunaan di dalam ruangan di lokasi yang kering. Jangan sampai terkena air atau kelembapan tinggi.
  • Keamanan Listrik: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
  • Petunjuk Pemotongan: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
  • Instalasi: Selalu putuskan daya sebelum pemasangan atau pemeliharaan.
  • Panas: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
  • Anak-anak: Jauhkan produk dan komponennya dari jangkauan anak-anak.

Isi Paket

Verifikasi bahwa semua komponen ada dalam paket Anda:

  • (2) 16.4ft RGB Flexible LED Light Strips
  • (1) Catu Daya
  • (1) IR Remote Controller (with battery included)
  • (20) Klip Pemasangan
Sylvania 32ft RGB Flexible Light Strip Starter Kit components

Image: Main product image showing the light strips, remote, power adapter, and clips.

Pengaturan dan Instalasi

  1. Siapkan Permukaan: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
  2. Hubungkan Komponen: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
  3. Uji Fungsionalitas: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
  4. Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
  5. Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
  6. Aktifkan Jarak Jauh: Remove the plastic tab from the remote control's battery door to activate the battery.
Diagram showing connection, cutting points, and mounting of LED strips

Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.

Operasi

The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.

Fungsi Kontrol Jarak Jauh:

  • AKTIF/NONAKTIF: Power the light strips on or off.
  • Pemilihan Warna: Pilih dari 16 warna statis menggunakan tombol warna.
  • Peredupan: Adjust the brightness of the selected color or dynamic mode.
  • Mode Dinamis: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Diagram of the IR remote control with labeled buttons for colors and modes

Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.

Pemeliharaan

  • Pembersihan: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
  • Jangka hidup: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
  • Penggantian Baterai Jarak Jauh: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.

Penyelesaian Masalah

MasalahKemungkinan PenyebabLarutan
Lampu tidak menyala.Power connection issue, remote battery dead, IR receiver blocked.Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction.
Kontrol jarak jauh tidak responsif.Remote battery dead, remote too far, IR receiver blocked.Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver.
Some sections of the light strip are not lighting up.Damaged section, incorrect cutting.Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure.

Spesifikasi

FiturDetil
Nomor Model65636
MerekLEDVANCE (Sylvania)
WarnaRGB (16 colors) + White
Panjang32ft (2 x 16.4ft strips)
PenggunaanHanya di Dalam Ruangan
Fitur KhususColor Changing, Dimmable, Energy Efficient
Jenis Sumber CahayaDIPIMPIN
Sumber DayaListrik Kabel
Tipe PengendaliKontrol Jarak Jauh IR
Jil.tage12 Volt
Apatage24 watt
KonektivitasInframerah
BahanPlastik
Berat Barang10.88 ons
Jangka hidupHingga 30,000 jam
Tahan AirTidak Tahan Air
UPC046135656361

Garansi dan Dukungan

This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garansi pabrik 1 tahun.

For technical support, warranty claims, or additional product information, please visit the official LEDVANCE websitus atau hubungi departemen layanan pelanggan mereka.

Anda juga dapat mengunjungi Toko LEDVANCE di Amazon untuk lebih banyak produk dan informasi.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.