Sanpyl 3G/4G LTE Base Hat Module Instruction Manual

1. Produk Lebihview

The Sanpyl 3G/4G LTE Base Hat Module is designed to provide 3G/4G LTE connectivity to various single board computers. It features a Mini PCI-E socket for compatible cellular modules and a Nano SIM card slot. This module can also operate independently via a Micro USB connection.

Fitur Utama:

• Compatible with 40-pin GPIO header boards such as Raspberry Pi 4, 3, 2, B+.
• Efficient power circuit supporting up to 3 Amps.
• Wide operating temperature range: -40℃ to 80℃.
• Clip-in Mini PCI-E socket for various LTE, UMTS/HSPA+, and GSM/GPRS/ modules.
• Accessible Nano SIM card socket.
• Can be used standalone with a PC/Laptop via Micro USB.

2. Isi Paket

Pastikan semua barang yang tercantum di bawah ini termasuk dalam paket Anda. Jika ada barang yang hilang atau rusak, silakan hubungi layanan pelanggan.

• 1 x 3G/4G LTE Base Hat Module
• 1 x USB 2.0 to Micro USB Cable
• 1 x Screw Driver
• 1 x Accessories Package (screws, standoffs)
• 1 x Panduan Pengguna (dokumen ini)

Gambar 2.1: Isi Paket

3. Spesifikasi Produk

4. Kompatibilitas

Compatible Host Boards:

• Raspberry Pi 4
• Raspberry Pi 3
• Raspberry Pi 2
• Raspberry Pi B+
• Papan Tinker Asus
• Batu 64
• Samsung ARTIK's Board
• Panda Latte

Compatible Mini PCI-E Modules:

• For Quectel: EC25/EC21/EC20/UC20/LTE-EP06 Series
• For Sierra Wireless: AirPrime MC Series
• For Telit: LM960, LE910V2, HE910, LE910Cx Series
• For Huawei: ME909s-120, ME909s-821 Series
• For Simcom: SIM7100, SIM7230 Series
• For ZTE: ZM8620 Series
• For U-Blox: MPCI-L2 Series
• For Thales: PLS62W, mPLS8, mPLAS9 Series

Figure 4.1: Compatible Single Board Computers

5. Product Layout and Dimensions

Familiarize yourself with the various components and their locations on the module.

Figure 5.1: Module Component Layout

The module's physical dimensions are provided for integration planning.

Gambar 5.2: Dimensi Produk

6. Petunjuk Penyiapan

Follow these steps to set up your 3G/4G LTE Base Hat Module.

1. Attach the HAT to your Host Board: Carefully align the 40-pin GPIO header of the Base Hat Module with the corresponding pins on your compatible single board computer (e.g., Raspberry Pi). Press down gently until it is securely seated.
2. Install Mini PCI-E Module: Insert your compatible 3G/4G LTE Mini PCI-E module into the designated slot on the Base Hat. Secure it with the provided screws if necessary.
3. Insert Nano SIM Card: Locate the Nano SIM card socket on the Base Hat. Insert your activated Nano SIM card into the slot until it clicks into place. Ensure the card is oriented correctly.
4. Hubungkan Antena (Opsional): If your Mini PCI-E module requires external antennas, connect them to the appropriate SMA connectors on the Base Hat.
5. Sambungan Daya: Connect the Micro USB cable to the 'Main USB' port on the Base Hat. Connect the other end to a power source or your host board's USB port. Alternatively, if using the module standalone, connect it to a PC/Laptop via Micro USB.
6. Power Selection Switch: Adjust the power selection switch (PWR SW) if needed, based on your specific setup and power requirements.

Gambar 6.1: Instalasi Example

7. Petunjuk Pengoperasian

Once the module is physically set up and powered, follow these general steps for operation:

1. Nyalakan: Ensure your host board or PC is powered on. The 3.3V Power LED on the Base Hat should illuminate, indicating power.
2. Instalasi Driver (bila perlu): Depending on your operating system and Mini PCI-E module, you may need to install specific drivers. Refer to the documentation for your chosen Mini PCI-E module for driver requirements.
3. Konfigurasi jaringan: Configure your operating system to recognize and connect to the 3G/4G LTE network provided by the module. This typically involves setting up APN (Access Point Name) settings.
4. Testing Connectivity: Verify network connectivity by attempting to access the internet or perform a network test.
5. Modus Mandiri: When connected to a PC/Laptop via Micro USB, the module should be recognized as a USB modem or network adapter, allowing for direct network access.

8. Pemeliharaan

To ensure the longevity and optimal performance of your Sanpyl 3G/4G LTE Base Hat Module, observe the following maintenance guidelines:

• Jaga kebersihan: Regularly clean the module with a soft, dry cloth. Avoid using liquid cleaners or solvents.
• Hindari Kondisi Ekstrim: Do not expose the module to extreme temperatures, humidity, or direct sunlight beyond its specified operating range.
• Tangani dengan hati-hati: Avoid dropping or subjecting the module to physical shock. When inserting or removing components, do so gently to prevent damage to connectors and pins.
• Pembaruan Firmware: Periodically check for firmware updates for your Mini PCI-E module, as these can improve performance and stability.

9. Penyelesaian masalah

If you encounter issues with your 3G/4G LTE Base Hat Module, refer to the following common troubleshooting steps:

• Tidak ada LED Daya: Ensure the Micro USB cable is securely connected and the power source is active. Check the power selection switch (PWR SW) position.
• Modul Tidak Terdeteksi: Verify that the Mini PCI-E module is correctly seated in its slot. Ensure the Base Hat is properly connected to the host board's GPIO or via Micro USB to a PC. Check for necessary drivers on your operating system.
• Tidak Ada Koneksi Jaringan: Confirm that the Nano SIM card is correctly inserted and activated with a data plan. Check your operating system's network settings, especially the APN configuration. Ensure external antennas (if used) are properly connected.
• Konektivitas Intermiten: This could be due to weak cellular signal. Try relocating the device or using external antennas. Ensure the power supply is stable and sufficient (up to 3 AmpS).
• Modul Terlalu Panas: Ensure adequate ventilation around the module and host board. Operating within the specified temperature range (-40℃ ~ 80℃) is crucial.
• Fungsi Reset: If the module becomes unresponsive, press the 'Reset' button (S1) to restart the module.

If problems persist after attempting these steps, consult the documentation for your specific Mini PCI-E module or contact Sanpyl customer support.