NUTOMO Fingerprint Entry Door Handle Lock

1. Pendahuluan

This manual provides detailed instructions for the installation, operation, and maintenance of your NUTOMO Fingerprint Entry Door Handle Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The NUTOMO smart lock offers multiple access methods including fingerprint, user passcode, IC card, and traditional physical keys, providing enhanced security and convenience for your home, hotel, or office.

2. Informasi Keselamatan

• Jangan mencoba membongkar atau memperbaiki kunci sendiri. Hubungi layanan pelanggan untuk mendapatkan bantuan.
• Use only specified batteries (4 AA batteries). Do not mix old and new batteries or different types of batteries.
• Keep physical keys in a secure location outside the property.
• Avoid exposing the lock to direct sunlight or extreme temperatures for prolonged periods.
• Ensure the door frame and door are properly aligned and free of obstructions for smooth operation.

3. Isi Paket

Verifikasi bahwa semua komponen tersedia sebelum memulai instalasi:

• Front Panel Assembly (with keypad and fingerprint sensor)
• Back Panel Assembly (with battery compartment)
• Mekanisme kait
• Pelat Mogok
• Sekrup Pemasangan dan Perangkat Keras
• Kunci Fisik (2)
• Kartu IC (2)
• Panduan Pengguna
• Template Instalasi

Note: 4 AA batteries are required but not included.

4. Pengaturan dan Instalasi

4.1 Persiapan Pintu

Pastikan pintu Anda memenuhi spesifikasi berikut:

• Door thickness: 1.49-2.36 inches (38-60 mm)
• Backset: 2-3/8 inches or 2-3/4 inches (60mm or 70mm)

If replacing an existing lock, ensure the door holes are compatible. If the door has two holes, you may need to seal one or use a deadbolt in conjunction with this lock if the holes are too close.

4.2 Pemasangan Kait

Adjust the latch length if necessary and install it into the door edge. Secure with screws.

4.3 Handle Direction Adjustment

The handle direction can be adjusted for left-hand or right-hand doors. Turn the front handle to the Left and the back handle to the Right for a left-hand door. For a right-hand door, turn the front handle to the Right and the back handle to the Left.

4.4 Front Panel and Mounting Plate Installation

Install the front panel, routing the IC wire under the latch. Then, install the mounting plate and connect the IC wire.

4.5 Pemasangan Baterai

Insert 4 AA batteries into the battery compartment on the back panel. Ensure correct polarity. Close the battery cover securely.

5. Petunjuk Pengoperasian

5.1 Metode Pembukaan Kunci

• Buka Kunci Sidik Jari: Tempatkan jari terdaftar Anda pada sensor.
• Passcode Unlock: Enter your registered passcode followed by '#'.
• Pembukaan Kunci Kartu IC: Tap your registered IC card on the keypad.
• Kunci Fisik untuk Membuka Kunci: Use the provided physical key for manual override.

5.2 Fitur Kunci Otomatis

The lock is equipped with an auto-lock feature that engages after a short period (typically 5 seconds) once the door is closed. This ensures your door is always secured.

5.3 Anti-Peeping Virtual Code

To enhance security, you can enter random digits before or after your actual passcode. This prevents others from guessing your code by observing your finger movements.

5.4 Emergency Power and Key Access

In case of battery depletion, the lock features a USB charging port for emergency power. Additionally, physical keys are provided for manual access.

5.5 Fungsi Bel Pintu

After waking up the keypad, press '#', and the doorbell will sound three times.

6. Programming and Management

6.1 Setting the Management Passcode

To enter the menu, input "*#". Then, press '1' for Management Setting, and '1' again to set the management passcode. Input your desired code twice, ending with '#'.

6.2 Adding Fingerprints and IC Cards

After setting the management passcode, you can add fingerprints and IC cards. Enter the management menu, select the appropriate option, and follow the voice prompts. For fingerprints, input your finger 5 times. For IC cards, tap the card once.

6.3 Sharing Passcodes

The lock supports up to 300 sets of passwords, allowing you to share access with multiple users.

6.4 Resetting the Lock

To reset the lock to factory settings, remove the battery cover while the lock is powered on. Press and hold the reset button for approximately 5 seconds until you hear "Initializing". Release the button, and the lock will reset.

7. Pemeliharaan

• Penggantian Baterai: Replace all 4 AA batteries when the low battery alarm sounds.
• Pembersihan: Bersihkan papan tombol dan sensor sidik jari dengan kain lembut dan kering. Hindari pembersih abrasif atau pelarut.
• Kondisi Lingkungan: The lock is designed to withstand temperatures from -13°F to 149°F and has an IP63 rating for dust and water resistance.

8. Penyelesaian masalah

• Kunci tidak merespons: Check battery levels. Use emergency USB power or physical key.
• Sidik jari tidak dikenali: Ensure your finger is clean and dry. Try re-registering your fingerprint. Cold weather can sometimes affect fingerprint reader performance; use a passcode or key fob as an alternative.
• Kode sandi tidak berfungsi: Ensure you are entering the correct passcode followed by '#'. Try resetting the lock if issues persist.
• Penguncian otomatis tidak berfungsi: Verify the door is fully closed and aligned.

9. Spesifikasi

10. Garansi dan Dukungan

For warranty information, technical support, or any inquiries regarding your NUTOMO Fingerprint Entry Door Handle Lock, please refer to the product packaging or visit the official NUTOMO website. Contact details for customer service are typically provided with your purchase.