Perkenalan
Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.
Petunjuk Keselamatan Penting
- Putuskan daya sebelum pemasangan atau servis.
- This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltagpersyaratan e.
- Do not expose the light to excessive moisture or extreme temperatures.
- Handle the LED board with care to avoid damage to components.
- Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
- Installation should be performed by a qualified individual if you are unsure.
Isi Paket
- 1 x SAMCON SBE-C-1 DC LED Light with Switch
Produk Selesaiview
The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.
Gambar 1: Depan view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.
Gambar 2: Kembali view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.
Petunjuk Instalasi
- Siapkan Permukaan Pemasangan: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
- Amankan Lampu LED: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
- Hubungkan Daya:
- Identify the positive (+) and negative (-) terminals of your DC power source.
- Hubungkan kabel merah from the LED light to the terminal positif (+) of your DC power source.
- Hubungkan kabel hitam from the LED light to the terminal negatif (-) of your DC power source.
- Warning: Ensure correct polarity to prevent damage to the LED light.
- Verifikasi Koneksi: Periksa kembali semua sambungan untuk memastikan semuanya aman dan terpolarisasi dengan benar.
Petunjuk Pengoperasian
- Nyalakan: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
- Use the Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.
Pemeliharaan
- Pembersihan: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
- Inspeksi: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
- Manajemen Panas: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Lampu tidak menyala | Tidak ada pasokan daya | Check if the DC power source is active. |
| Lampu tidak menyala | Polaritas kabel salah | Verify that the red wire is connected to positive (+) and the black wire to negative (-). |
| Lampu tidak menyala | Sakelar rusak | Ensure the integrated switch is pressed to the ON position. |
| Cahaya berkedip | Pasokan daya tidak stabil | Ensure a stable DC power source is used. |
| Cahaya berkedip | Koneksi longgar | Periksa dan kencangkan semua sambungan kabel. |
Spesifikasi
| Fitur | Detil |
|---|---|
| Merek | SAMCON |
| Model | SBE-C-1 |
| Jenis Cahaya | DIPIMPIN |
| Sumber Cahaya Wattage | 10 Watt |
| Fitur Khusus | Hemat Energi |
| Tipe Pengendali | Tombol Tekan |
| Warna | Putih |
| Komponen yang Termasuk | Lampu |
Garansi dan Dukungan
For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.