Docreate Spot Welder User Manual

1. Pendahuluan

Thank you for choosing the Docreate LCD 99 Gear Adjustable Handheld Spot Welder. This portable device is designed for efficient and precise spot welding of nickel-plated sheets, ideal for 18650 lithium battery assembly, cell phone repair, and electric car repair. Featuring an intuitive LCD display and both automatic and manual operating modes, it offers versatility and ease of use for both professional and amateur users.

2. Petunjuk Keselamatan

Please read and understand all safety instructions before operating the spot welder to prevent injury or damage to the device.

• Always wear appropriate personal protective equipment, including safety glasses, to protect your eyes from sparks.
• Ensure adequate ventilation in your workspace to disperse any fumes.
• Do not operate the device in wet conditions or near flammable materials.
• Jauhkan perangkat dari jangkauan anak-anak dan hewan peliharaan.
• Handle batteries with care. Do not short-circuit batteries or attempt to weld damaged batteries.
• Disconnect the device from power when not in use or during maintenance.

3. Isi Paket

Verifikasi bahwa semua item ada dalam paket Anda:

• 1 x Docreate Handheld Spot Welder
• 1 x 2-meter Nickel Roll
• 1 x Sandpaper
• 1 x Kabel Pengisian Daya Tipe-C
• 1 x Pen Cap
• 2 x Copper Pins (Welding Needles)

4. Produk Lebihview

The Docreate Spot Welder is a compact and powerful tool designed for precision welding tasks.

4.1. Fitur Utama

• Desain Portabel: Lightweight and compact, ideal for both indoor and outdoor use.
• Layar LCD: Provides real-time information including temperature, mode, preheat time, trigger time, power level, and battery status.
• 99 Adjustable Gears: Allows for precise control over welding parameters to suit various materials and thicknesses.
• Dual Pulse Technology: Ensures strong and reliable welds.
• Auto/Manual Modes: Menawarkan fleksibilitas dalam pengoperasian.

5. Pengaturan

5.1. Mengisi Daya Perangkat

Before first use, fully charge the spot welder using the provided Type-C charging cable. Connect the cable to the device's Type-C port and a compatible USB power adapter (not included).

5.2. Daya Hidup/Mati

Press and hold the power button on the side of the device to turn it on or off. The LCD screen will illuminate upon power-on.

6. Petunjuk Pengoperasian

The spot welder offers both automatic and manual modes for different welding preferences.

6.1. Pemilihan Mode

The device allows switching between Automatic and Manual modes. Use the controls on the device to navigate the LCD menu and select your desired mode.

6.2. Mode Otomatis

In Automatic Mode, simply place both welding pins firmly on the desired welding position. The device will automatically detect contact and initiate the weld after a set delay time. Ensure the welding pins are inclined at an angle of 45°-60° to the welding surface for optimal results.

6.3. Modus Manual

In Manual Mode, you have direct control over the welding trigger. Adjust parameters via the LCD display. Place both welding pins firmly on the desired welding position, ensuring a 45°-60° inclination. Then, press the welding button on the side of the device to initiate the weld.

6.4. Adjusting Welding Gears (Power Level)

The spot welder features 99 adjustable gears to control the welding power. Higher gear numbers correspond to higher power. Adjust the gear setting via the LCD display to match the thickness of the nickel-plated sheets you are welding (0.1mm to 0.25mm).

7. Pemeliharaan

Proper maintenance ensures the longevity and optimal performance of your spot welder.

• Pembersihan: Regularly wipe the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Perawatan Elektroda: The copper pins (electrodes) are replaceable. If they become worn or oxidized, gently sand them with the provided sandpaper or replace them to ensure good electrical contact.
• Penyimpanan: Store the spot welder in a cool, dry place away from direct sunlight and moisture.
• Baterai: For long-term storage, ensure the battery is partially charged (around 50%) to preserve its lifespan.

8. Penyelesaian masalah

If you encounter issues with your spot welder, refer to the following common problems and solutions:

• Perangkat tidak menyala: Ensure the battery is charged. Connect the Type-C charging cable and allow it to charge for some time before attempting to power on again.
• Weak or inconsistent welds:
  • Check the battery level; a low battery can affect welding power.
  • Increase the gear (power) setting.
  • Ensure the welding pins are clean and have good contact with the nickel sheet and battery terminal. Sand the tips if necessary.
  • Verify the welding angle (45°-60°) and apply firm, even pressure.
• Terlalu panas: The device has an intelligent internal temperature detection system. If it overheats, it may temporarily shut down. Allow it to cool down before resuming operation.
• Masalah pada layar LCD: If the display is not functioning correctly, try restarting the device. If the problem persists, contact customer support.

9. Spesifikasi

10. Garansi dan Dukungan

Docreate products are manufactured to the highest quality standards. For warranty information, technical support, or any inquiries regarding your spot welder, please contact Docreate customer service through the retailer's platform or the official Docreate website. Please have your model number (Docreate-757) and purchase details ready when contacting support.