1. Pendahuluan
This manual provides detailed instructions for the installation and operation of the Sarmert 3-Lead Hard-Wire Kit. This kit is designed to provide continuous power to your Micro-USB compatible dash camera, enabling features such as 24-hour parking monitoring and low voltage protection. It converts 12V-24V vehicle power to a stable 5V/2.5A output for your device.
Gambar 1: Lebihview of the Sarmert 3-Lead Hard-Wire Kit and included fuse taps.
2. Produk Lebihview dan Fitur
The Sarmert Hard-Wire Kit ensures your dash camera operates reliably with advanced power management features.
Fitur Utama:
- Automatic Parking Mode: Powers on and records automatically when the vehicle is accessed, supporting time-lapse or continuous recording.
- Volume lebartagKompatibilitas: Compatible with 12V-24V vehicles (cars, trucks, buses). Adjustable protection voltagpengaturan e.
- Monitor Parkir 24/7: Provides constant power to the dash cam for continuous surveillance, protecting against theft.
- Vol rendahtage Perlindungan: Intelligent system automatically cuts power to prevent vehicle battery drain when voltage drops below 11.6V (for 12V systems) or 23.2V (for 24V systems).
- Micro-USB Compatibility: Designed for Micro-USB dash cams, GPS navigators, and radar detectors, freeing up the cigarette lighter port.
Isi Paket:
- Sarmert 3-Lead Hard-Wire Kit with Micro-USB connector
- Assorted Fuse Taps
- Assorted Fuses
- Manual Pemilik (dokumen ini)
Figure 2: Contents of the Sarmert Hard-Wire Kit package.
Figure 3: The 3-lead hard-wire kit provides multiple protections including battery drain, over-current, short-circuit, reverse connection, and overheat protection.
3. Pengaturan dan Instalasi
Proper installation is crucial for the hard-wire kit's functionality. If you are unfamiliar with vehicle electrical systems, it is recommended to seek professional assistance.
Diagram Pengkabelan:
The hard-wire kit consists of three main wires:
- Kabel Hitam (GND): Connect to a metal bolt or screw on the vehicle chassis for ground.
- Kabel Merah (ACC): Connect to a fuse in the fuse box that is only powered when the ignition is on (Accessory power).
- Kabel Kuning (BAT+): Connect to a fuse in the fuse box that has constant power, even when the ignition is off (Battery power).
Figure 4: Hard-wire kit control box showing input and output cables, and connections for GND, ACC, and BAT+.
Langkah-langkah Instalasi:
- Temukan Kotak Sekring Anda: Refer to your vehicle's owner's manual to find the location of the fuse box. Common locations include under the dashboard, in the glove compartment, or under the hood.
- Identifikasi Slot Sekring: Using a circuit tester, identify a fuse slot that provides ACC power (on with ignition) for the Red wire and a fuse slot that provides constant BAT+ power (always on) for the Yellow wire.
- Select Correct Fuse Type: Choose the appropriate fuse tap from the kit that matches the fuse type in your vehicle's fuse box.
- Connect Wires to Fuse Taps: Insert the Red and Yellow wires into their respective fuse taps. Insert the original fuse into the lower slot of the fuse tap and a new fuse (matching the original's amperage) into the upper slot for the hard-wire kit.
- Insert Fuse Taps: Plug the fuse taps into the identified ACC and BAT+ fuse slots.
- Locate a Ground Point: Connect the Black (GND) wire to a secure metal bolt or screw on the vehicle's chassis that is free of paint or rust.
- Kabel Rute: Carefully route the Micro-USB output cable to your dash camera, ensuring it does not interfere with driving controls or airbags. Conceal the cable behind trim panels for a clean installation.
- Hubungkan ke Dash Cam: Plug the Micro-USB connector into your dash camera.
- Sistem uji: Start your vehicle to ensure the dash cam powers on. Turn off the vehicle and remove the key to verify the parking monitor mode activates (if enabled on your dash cam).
Figure 5: Visual guide for the hard-wire kit installation process within a vehicle.
4. Petunjuk Pengoperasian
Parking Monitor Mode:
Once correctly installed, the hard-wire kit enables your dash camera's parking monitor function. When your vehicle is turned off, the kit continues to supply power from the vehicle battery, allowing the dash cam to record in parking mode (e.g., time-lapse or motion detection, depending on your dash cam's features).
Vol rendahtage Perlindungan:
The hard-wire kit features an integrated low voltage protection system to prevent excessive drain on your vehicle's battery. If the vehicle battery voltage drops below a preset threshold, the kit will automatically cut power to the dash camera.
- For 12V batteries, power is cut at 11.6V, 12.0V, 12.2V, or 12.4V (user adjustable).
- For 24V batteries, power is cut at 23.6V, 24.0V, 24.4V, or 24.8V (user adjustable).
To adjust the protection voltage, press and hold the '+' or '-' buttons on the hard-wire kit box for 3 seconds to display the current setting, then use the buttons to select the desired voltage. The digital display on the hard-wire kit box will show the current voltagpengaturan.
Figure 6: Low voltage protection thresholds for 12V and 24V batteries.
5. Pemeliharaan
- Pemeriksaan Rutin: Periksa kabel secara berkala untuk melihat tanda-tanda keausan, kerusakan, atau sambungan yang longgar.
- Integritas Sekering: Ensure the fuses in the fuse taps are correctly seated and not blown. Replace blown fuses with ones of the same ampmarah.
- Kebersihan: Keep the hard-wire kit box and connections free from dust and moisture.
- Kondisi Lingkungan: Avoid exposing the kit to extreme temperatures or direct sunlight for prolonged periods, which could affect its lifespan.
6. Penyelesaian masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Kamera dasbor tidak menyala. | Loose connection, blown fuse, incorrect wiring, vehicle battery too low. | Check all connections. Inspect fuses in fuse taps and replace if blown. Verify wiring (GND, ACC, BAT+). Check vehicle battery voltage. |
| Parking monitor mode not activating. | Dash cam setting not enabled, incorrect BAT+ connection, low voltage perlindungan diaktifkan. | Ensure parking mode is enabled in your dash cam's settings. Verify the Yellow (BAT+) wire is connected to a constant power source. Check if low voltage protection has cut power. |
| Baterai kendaraan cepat habis. | Volume rendahtage protection set too low, dash cam consuming too much power in parking mode. | Sesuaikan volume rendahtage protection setting to a higher value. Consider using a dash cam with more efficient parking mode options (e.g., motion detection only). |
| Jil.tage display on kit box is off. | Masalah daya, kesalahan internal. | Ensure the kit is receiving power. If the issue persists, contact customer support. |
| Micro-USB connector does not fit. | Incompatible dash cam port (e.g., USB-C, Mini-USB). | This kit is designed for Micro-USB ports only. Verify your dash cam's port type. |
Figure 7: The hard-wire kit is compatible with Micro-USB devices, not USB-C or Mini-USB.
7. Spesifikasi
| Fitur | Detil |
|---|---|
| Masukan Voltage | Tegangan DC 12V - 24V |
| Volume Keluarantage | Tegangan DC5V |
| Arus Keluaran | 2.5A Maksimal |
| Jenis Konektor | Mikro USB |
| Vol rendahtagPerlindungan e (12V) | 11.6V / 12.0V / 12.2V / 12.4V (Adjustable) |
| Vol rendahtagPerlindungan e (24V) | 23.6V / 24.0V / 24.4V / 24.8V (Adjustable) |
| Panjang Kabel Input | Approximately 1000mm ± 50mm |
| Panjang Kabel Output | Approximately 2500mm ± 50mm |
| Dimensi Produk | 14.5 x 9 x 5 cm; 210 g (Overall package dimensions) |
8. Garansi dan Dukungan
For warranty information or technical support, please refer to the documentation provided with your purchase or contact Sarmert customer service directly. Keep your proof of purchase for any warranty claims.
You can visit the Sarmert store for more information: Sarmert Store