Wireless Car Parking Assist System User Manual

1. Pendahuluan

This user manual provides comprehensive instructions for the installation, operation, and maintenance of your new Wireless Car Parking Assist System. Please read this manual thoroughly before using the product to ensure proper function and safety.

The system is designed to assist drivers in safely parking their vehicles by detecting obstacles behind the car and providing visual and audible warnings.

2. Isi Paket

Saat membuka kemasan, harap verifikasi bahwa semua komponen ada dan dalam kondisi baik:

• Kotak Kontrol Utama
• Indikator Tampilan LED
• 4 x Sensor Parkir
• Kabel listrik
• Hole Saw (22mm)
• Double-sided Adhesive Tapes
• Panduan Pengguna (Bahasa Inggris)

Gambar 2.1: Lebihview of the system components including the main control box, LED display, four sensors, and power adapter.

Gambar 2.2: Terperinci view showing the main control box, LED display, four sensors, power cable, and hole saw. Note the wired connections for sensors and power, and wireless connection for the LED display.

3. Spesifikasi

Gambar 3.1: Technical dimensions of the main control box and individual sensors, including the required drill bit size.

4. Pengaturan dan Instalasi

Proper installation is crucial for the optimal performance of the parking assist system. It is recommended to have this installed by a professional if you are not familiar with car electrical systems.

4.1 Pemasangan Sensor

1. Choose Sensor Locations: Identify suitable locations on your vehicle's rear bumper for the four sensors. Ensure they are evenly spaced and at a consistent height for accurate detection. Avoid placing them too close to the ground or too high.
2. Lubang Bor: Use the provided 22mm hole saw to carefully drill holes at the marked locations on the bumper. Ensure the holes are clean and free of burrs.
3. Insert Sensors: Gently push each sensor into its respective hole until it sits flush with the bumper surface. Ensure the sensors are oriented correctly (if applicable).
4. Route Sensor Cables: Route the sensor cables through the bumper and into the vehicle's trunk or interior, ensuring they are secured and do not interfere with moving parts.

4.2 Main Control Box Installation

1. Kotak Kontrol Pemasangan: Find a secure and dry location in the vehicle's trunk or interior to mount the main control box. Use the double-sided adhesive tapes or screws (not included) to fix it in place.
2. Hubungkan Sensor: Connect the cables from the four parking sensors to the corresponding ports on the main control box. Ensure a firm connection.
3. Hubungkan Kabel Daya: Connect the power cable to the main control box. The other end of the power cable, which includes the manual switch and cigarette lighter plug, should be routed to the vehicle's cigarette lighter socket.

4.3 LED Display Installation

1. Tampilan Posisi: Place the LED display on the dashboard or another visible location within the driver's view. The wireless connection between the main control box and the LED display allows for flexible placement without cable limitations.
2. Secure Display: Use the double-sided adhesive tape to secure the LED display in its chosen position.

Gambar 4.1: Illustration demonstrating the advantage of wireless connectivity for the LED display, allowing for easier placement compared to wired systems.

Gambar 4.2: This diagram illustrates that the system is not limited by distance, making it suitable for larger vehicles such as caravans up to 8 meters long, due to its wireless display connection.

5. Petunjuk Pengoperasian

The parking assist system is designed for simple and intuitive operation.

1. Nyalakan: Insert the cigarette lighter plug into your vehicle's cigarette lighter socket. Turn on the manual switch located on the plug. The system will activate when the vehicle is put into reverse gear.
2. Deteksi: As you reverse, the sensors will detect obstacles behind your vehicle within the 1-8 feet range.
3. Peringatan Visual: The LED display will show the distance to the obstacle in meters and indicate the warning level with colored bars (e.g., green for safe, yellow for caution, red for close).
4. Audible Warning: The system will emit beeping sounds. The frequency of the beeps will increase as you get closer to an obstacle, providing an escalating warning.
5. Matikan: To turn off the system, simply switch off the manual switch on the cigarette lighter plug. This saves power when the system is not needed.

Gambar 5.1: An illustration of the parking assist system in action, showing a car reversing, sensors detecting an object, and the LED display providing visual feedback to the driver.

6. Pemeliharaan

To ensure the longevity and accurate performance of your parking assist system, follow these simple maintenance guidelines:

• Sensor Bersih: Regularly clean the surface of the parking sensors on the bumper. Dirt, mud, snow, or ice can obstruct the sensors and affect their accuracy. Use a soft, damp kain untuk membersihkannya.
• Periksa Koneksi: Periodically inspect all wired connections (sensors to control box, power cable to control box) to ensure they are secure and free from corrosion or damage.
• Hindari Bahan Kimia Keras: Do not use abrasive cleaners or harsh chemicals on the sensors or display, as this may damage the surfaces.
• Lindungi dari Kondisi Ekstrim: While the system is designed to be robust, avoid exposing the main control box and display to extreme temperatures or direct water exposure beyond normal vehicle use.

7. Penyelesaian masalah

If you encounter issues with your parking assist system, refer to the following troubleshooting guide:

8. Garansi dan Dukungan

For warranty information and technical support, please refer to the contact details provided with your purchase or visit the manufacturer's official weblokasi.

Manufacturer: CUQI

Model: KE-00

ASIN: B0CHDP3KXJ

For further assistance, you may contact the seller or manufacturer directly. Please have your product model number and purchase details ready.