Dragonhawk Wireless Tattoo Gun Machine YZBTD Instruction Manual

1. Pendahuluan

This manual provides detailed instructions for the safe and effective operation of your Dragonhawk Wireless Tattoo Gun Machine, Model YZBTD. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. This machine is designed for professional tattoo artists and beginners, offering versatility and reliable performance.

2. Informasi Keselamatan

Always prioritize safety when operating tattoo equipment. Failure to follow these guidelines may result in injury or damage to the device.

• Hanya untuk Pemakaian Luar: This device is intended for tattooing on skin.
• Sterilisasi: Ensure all needles, cartridges, and contact surfaces are properly sterilized before each use.
• Sumber Daya: Gunakan hanya kabel pengisi daya dan adaptor daya yang kompatibel yang telah disediakan.
• Keamanan Baterai: Do not expose batteries to extreme temperatures or puncture them. Dispose of used batteries responsibly.
• Penanganan: Handle the machine with care. Avoid dropping or subjecting it to strong impacts.
• Kelembaban: Keep the device dry. It is water-resistant, but not waterproof. Avoid submerging it in liquids.
• Anak-anak: Jauhkan dari jangkauan anak-anak.

3. Produk Lebihview & Komponen

The Dragonhawk Wireless Tattoo Gun Machine YZBTD is a cordless pen-style rotary tattoo machine featuring an adjustable stroke length and a powerful coreless motor.

Gambar 3.1: Lebihview of the tattoo machine's control panel and battery.

Komponen Utama:

• Tubuh mesin: Main housing containing the motor and drive system.
• Baterai: Detachable power source with OLED display and control buttons.
• Pegangan yang Dapat Disesuaikan: Rotates to adjust needle depth.
• Stroke Adjustment Knob: Allows selection of 7 stroke lengths (2.4mm - 4.2mm).
• Needle Cartridge Slot: Where tattoo needle cartridges are inserted.
• Port Pengisian Daya Tipe-C: Untuk mengisi ulang baterai.

4. Pengaturan

4.1 Pemasangan Baterai

The machine comes with two replaceable batteries to ensure continuous operation.

1. Pastikan mesin dimatikan.
2. Gently twist the battery pack counter-clockwise to detach it from the machine body.
3. Align a charged battery pack with the machine body and twist clockwise until securely fastened.

Figure 4.1: The machine is equipped with two replaceable batteries for extended use.

4.2 Needle Cartridge Installation

Use only compatible Dragonhawk cartridge needles for optimal performance.

1. Pilih kartrid jarum yang diinginkan.
2. Insert the needle cartridge into the machine's slot, pushing firmly until it clicks into place.
3. To remove, twist the cartridge slightly and pull it out.

Figure 4.2: Proper insertion of a needle cartridge into the machine.

5. Petunjuk Pengoperasian

Biasakan diri Anda dengan panel kontrol untuk pengoperasian yang efisien.

Figure 5.1: Control panel and stroke adjustment.

5.1 Daya Hidup/Mati

• Tekan dan tahan tombol 'O' (Switch Button) for a few seconds to power the machine on or off.
• The OLED display will show the current voltage dan tingkat baterai.

5.2 Penyesuaian Volumetage

• Gunakan '+' (Voltage Increase Key) Dan '-' (Voltage Reduction Key) buttons to adjust the voltage dalam peningkatan 0.1V.
• Volume yang direkomendasikantagrentang e adalah 4V-12V.

5.3 Changing Mode (Liner/Shader)

• Tekan tombol 'M' (Switch Mode) button to switch between Liner (L) and Shader (S) gears.
• The machine automatically memorizes the voltage settings for each mode.

5.4 Menyesuaikan Panjang Langkah

The machine offers 7 adjustable stroke lengths from 2.4mm to 4.2mm.

• Rotate the adjustment knob located on the machine body to select the desired stroke length.
• Available lengths: 2.4mm, 2.7mm, 3.0mm, 3.3mm, 3.6mm, 3.9mm, 4.2mm.

Figure 5.2: Adjusting the stroke length by rotating the knob.

5.5 Video Produk Resmi

6. Pemeliharaan

6.1 Pembersihan

• Selalu putuskan sambungan listrik sebelum membersihkan.
• Wipe the machine body with a soft, damp cloth and a mild disinfectant.
• Do not use abrasive cleaners or submerge the machine in liquid.
• Ensure no liquid enters the motor or charging port.

6.2 Pengisian daya

The machine is equipped with a Type-C charging port.

• Connect the provided Type-C cable to the charging port on the battery pack.
• Hubungkan ujung lainnya ke adaptor daya USB yang kompatibel.
• Pengisian penuh memerlukan waktu sekitar 1.5 jam.
• The battery indicator on the OLED display will show charging status.

Gambar 6.1: Port pengisian daya Tipe-C pada paket baterai.

6.3 Perawatan Baterai

• Untuk memperpanjang masa pakai baterai, hindari mengosongkan baterai sepenuhnya secara sering.
• Store the machine and spare batteries in a cool, dry place when not in use.
• If storing for an extended period, charge the batteries to about 50-60% capacity.

7. Penyelesaian masalah

Lihat tabel di bawah untuk masalah umum dan solusinya.

8. Spesifikasi

Technical details of the Dragonhawk Wireless Tattoo Gun Machine YZBTD.

9. Garansi & Dukungan

Dragonhawk is committed to providing high-quality products and excellent customer service.

• Cakupan Produk: Dragonhawk products typically include coverage for manufacturing defects. Please refer to your purchase documentation for specific warranty terms.
• Dukungan Teknis: For video tutorials, setup guides, and professional tips, visit Youtube.com/@Dragonhawkofficial.
• Pelayanan pelanggan: For any inquiries or issues with your order, please reach out through Amazon's messaging system.
• Pengembalian: This product has a 30-day return policy for refund/replacement.