Thermalright TL-K12W-D2 120mm ARGB CPU Case Fan User Manual

1. Pendahuluan

This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright TL-K12W-D2 120mm ARGB CPU Case Fan. This high-performance fan is designed to provide efficient cooling for your desktop computer components while offering customizable ARGB lighting. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

2. Informasi Keselamatan

• Pastikan sistem komputer Anda dimatikan dan dicabut dari stopkontak sebelum pemasangan.
• Tangani komponen dengan hati-hati untuk menghindari kerusakan akibat listrik statis. Pertimbangkan untuk menggunakan gelang anti-statis.
• Jangan mencoba memodifikasi kipas atau kabelnya. Modifikasi tanpa izin dapat membatalkan garansi Anda dan menimbulkan risiko keselamatan.
• Jauhkan kipas angin dari cairan dan kelembapan berlebihan.
• Ensure proper cable management to prevent interference with moving parts or other components.

3. Isi Paket

Verifikasi bahwa semua item ada dalam paket Anda:

• Thermalright TL-K12W-D2 120mm ARGB CPU Case Fan
• Sekrup Pemasangan
• Adhesive Nails (optional for certain installations)

4. Spesifikasi

5. Pengaturan dan Instalasi

Follow these steps to properly install your Thermalright TL-K12W-D2 fan into your computer case or onto a radiator.

5.1 Orientasi Penggemar

It is crucial to install the fan with the correct airflow direction for optimal cooling. The fan blades draw air in from the side with the visible blades and exhaust air from the side with the frame supports.

Image: The fan's blade side is the intake, and the frame side is the exhaust. Ensure correct orientation for desired airflow.

For case cooling, typically front fans are intake, and rear/top fans are exhaust. For radiator cooling, ensure the fan pushes or pulls air through the radiator effectively.

5.2 Instalasi Fisik

1. Position the fan in the desired mounting location (e.g., case fan slot, radiator).
2. Align the screw holes on the fan with the mounting holes on your case or radiator.
3. Use the provided mounting screws to secure the fan. Tighten screws evenly to prevent warping.

Image: Securing the fan to the computer case using screws. Ensure a firm but not overtightened fit.

5.3 Connecting Power (PWM)

The TL-K12W-D2 fan uses a 4-pin PWM connector for power and speed control.

1. Locate an available 4-pin fan header on your motherboard (often labeled "CPU_FAN", "CHA_FAN", or "SYS_FAN").
2. Connect the fan's 4-pin PWM cable to the motherboard header.
3. If installing multiple fans, you can daisy-chain them using the provided PWM splitter/extension cables. Ensure the total number of connected fans does not exceed the motherboard header's power rating (typically less than three fans per standard header without a powered hub).

5.4 Connecting ARGB Lighting

For customizable lighting effects, connect the fan's 3-pin 5V ARGB cable to a compatible motherboard header or ARGB controller.

1. Locate a 3-pin 5V ARGB header on your motherboard (often labeled "ADD_HEADER", "ARGB_HEADER", or "D_LED"). Note: Do not connect to a 4-pin 12V RGB header, as this will damage the LEDs.
2. Connect the fan's 3-pin ARGB cable to the motherboard header.
3. If installing multiple ARGB fans or other ARGB components, you can daisy-chain them. Ensure the total number of connected ARGB components does not exceed the motherboard header's power rating (typically less than five components without a powered hub).

Image: The 3-pin 5V ARGB connector for lighting synchronization. This connector is distinct from 4-pin 12V RGB connectors.

6. Petunjuk Pengoperasian

6.1 Kontrol Kecepatan Kipas (PWM)

The 4-pin PWM connector allows your motherboard to dynamically control the fan speed based on system temperature. This ensures efficient cooling when needed and quiet operation during lighter loads.

• Access your motherboard's BIOS/UEFI settings or use a compatible software utility provided by your motherboard manufacturer (e.g., ASUS AI Suite, MSI Dragon Center, Gigabyte SIV).
• Navigate to the fan control section.
• Set a fan curve or choose a preset profile (e.g., Silent, Standard, Performance) to manage fan speed.

6.2 Kontrol Pencahayaan ARGB

The 3-pin 5V ARGB connector enables synchronization of lighting effects with other ARGB components in your system.

• Use your motherboard's ARGB control software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Select desired lighting modes, colors, and effects.
• Ensure the software detects the connected ARGB devices. If not, check connections and software settings.

7. Pemeliharaan

Perawatan rutin membantu memastikan kinerja optimal dan memperpanjang umur pakai kipas Anda.

• Pembersihan: Periodically clean dust from the fan blades and frame using compressed air or a soft brush. Ensure the fan is powered off and unplugged before cleaning. Hold the fan blades gently to prevent them from spinning rapidly during cleaning, which can damage the bearing.
• Bantalan: The S-FDB V2 bearing is designed for long-term, maintenance-free operation. Do not attempt to disassemble the fan or lubricate the bearing, as this may cause damage.
• Pemeriksaan Kabel: Occasionally check cables for any signs of wear, fraying, or loose connections.

8. Penyelesaian masalah

9. Garansi dan Dukungan

Thermalright products are manufactured to high quality standards. For warranty information and technical support, please refer to the official Thermalright websitus web atau hubungi penjual lokal Anda. Simpan bukti pembelian Anda untuk klaim garansi.