Perkenalan
The RunCam Spotter V2 Micro FPV AIO Camera is a compact, all-in-one camera and video transmitter designed for various RC applications, including RC cars, boats, drones, and planes. It features a 700TVL camera with a 170-degree field of view, an integrated microphone, and an On-Screen Display (OSD) for real-time data. The 5.8G video transmitter offers adjustable power output from 20mW to 200mW across 40 channels, ensuring compatibility with standard FPV goggles and monitors.
Isi Paket
- 1x Spotter V2 Micro FPV AIO Camera (with Cloverleaf antenna)
- 1x XT-60 Power Cable
- 1x Double Sided Tape (one side Velcro)
- 1x Spare Whip Antenna
- 1x Panduan Pengguna (dokumen ini)
Produk Selesaiview
The Spotter V2 is designed for minimal impact on device performance due to its lightweight and compact form factor. It provides an expansive field of view for an immersive FPV experience.
Image: The RunCam Spotter V2 FPV Camera, demonstrating its compact size and lightweight design, weighing only 9g.
Image: Illustration of the 170-degree wide-angle lens, providing an expansive field of view for enhanced detail in FPV applications.
Image: Detailed dimensions of the Spotter V2 camera, measuring 35x20.5x17.8mm (excluding antenna).
Pengaturan
- Sambungan Daya: Connect the provided XT-60 power cable to the camera and your power source (2S-4S LiPo battery, 7.4V-14.8V). Ensure correct polarity.
- Pemasangan Antena: The camera comes with a pre-installed Cloverleaf antenna. A spare Whip Antenna is included for replacement if needed. Ensure the antenna is securely attached.
- Pemasangan: Use the double-sided tape (one side Velcro) to securely mount the camera on your RC vehicle. Position the camera to achieve the desired field of view.
- Pendinginan: Due to potential heat generation, especially in enclosed spaces, ensure adequate airflow around the camera's heatsink. Consider adding a small cooling fan if mounting inside an RC vehicle without natural ventilation.
- FPV Receiver Connection: The Spotter V2 is compatible with all analog 5.8G FPV goggles and monitors. Refer to your FPV receiver's manual for pairing instructions.
Image: The Spotter V2 camera is broadly compatible with analog FPV goggles and monitors.
Petunjuk Pengoperasian
- Nyalakan: Connect the camera to a compatible power source. The camera will power on automatically.
- Channel and Band Selection: The camera features 5 bands and 40 channels. Use the button on the camera to cycle through channels and bands. Refer to the detailed frequency table (usually provided in a separate quick start guide or on the product page) to match your FPV receiver.
- Tampilan di Layar (OSD): The integrated OSD provides real-time flight data, such as battery voltage and channel information. This data is overlaid on the video feed.
- Mikrofon Terintegrasi: The built-in microphone captures audio, enhancing the immersive FPV experience.
- Transmisi Video: Once powered on and a channel is selected, the camera will transmit video. Ensure your FPV goggles or monitor are tuned to the same frequency.
Image: The camera's button for frequency adjustment and its heatsink for thermal management.
Pemeliharaan
- Pembersihan: Keep the camera lens clean using a soft, dry cloth. Avoid abrasive materials or harsh chemicals.
- Manajemen Termal: Regularly inspect the heatsink for dust or debris. Ensure consistent airflow to prevent overheating, which can degrade video quality and shorten component lifespan.
- Perawatan Antena: Handle the antenna carefully. If the Cloverleaf antenna is damaged, it can be replaced with the spare Whip Antenna by soldering.
- Penyimpanan: Simpan kamera di tempat yang kering dan sejuk, jauhkan dari sinar matahari langsung dan suhu ekstrem.
Penyelesaian Masalah
| Masalah | Kemungkinan Penyebab | Larutan |
|---|---|---|
| Distorted or No Video Signal |
|
|
| Camera Gets Excessively Hot |
|
|
| Tidak Ada Audio |
|
|
Spesifikasi
| Fitur | Detil |
|---|---|
| Kamera | 700 TVL, 170-degree wide-angle lens |
| Resolusi | 1280*960 |
| Resolusi Output Video | 720 piksel |
| Default Video Input | SAHABAT |
| Transmisi Video | 5.8G, 40CH, 20mW~200mW adjustable |
| Jarak Transmisi Maksimum | 500 meters / 547 yards |
| Daya Masukan | 2S-4S (7.4V~14.8V) |
| Antena | Cloverleaf and Whip antenna (interchangeable) |
| Penyesuaian Frekuensi | Tekan tombol |
| Fitur | Built-in OSD, Integrated Microphone |
| Pencahayaan Minimal | 0.5 LUX |
| Arus Operasional | 80mA |
| Dimensi (P*L*T) | 35*20.5*17.8mm (Antenna not included) |
| Berat Total | 9g |
| Bahan | Plastik |
| Tingkat Keterampilan | Pemula |
Jaminan
The RunCam Spotter V2 FPV Camera and Transmitter Kit typically comes with a 1-year limited warranty. For specific warranty terms, conditions, and claim procedures, please refer to the official RunCam websitus web atau hubungi dukungan pelanggan mereka secara langsung. Simpan bukti pembelian Anda untuk validasi garansi.
Mendukung
For further assistance, technical support, or inquiries regarding the RunCam Spotter V2, please visit the official RunCam website or contact their customer service department. Online resources, FAQs, and firmware updates may also be available on their weblokasi.
Official RunCam Store: Visit the RunCam Store on Amazon