ROBOTIME Motorized Marble Run Combination Set Instruction Manual

1. Pendahuluan

This manual provides detailed instructions for the assembly, operation, and maintenance of your ROBOTIME Motorized Marble Run Combination Set. This set includes the LGC01 Marble Spaceport, LGA01 Marble Night City, and the LG01 Link Pack, designed to be combined into an intricate and engaging marble maze. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

2. Informasi Keselamatan

• Peringatan Bagian Kecil: Produk ini mengandung bagian-bagian kecil dan tidak cocok untuk anak di bawah 3 tahun karena bahaya tersedak.
• Rekomendasi Usia: Recommended for individuals 14 years and older. Adult supervision is advised for younger builders.
• Penanganan Material: The components are made of basswood. Handle with care to avoid splinters or breakage.
• Komponen Listrik: The LGC01 Marble Spaceport includes a motor. Ensure proper battery installation and avoid contact with water.
• Tepi Tajam: Some laser-cut parts may have slightly sharp edges. Exercise caution during assembly.
• Ventilasi: Lakukan perakitan di area yang berventilasi baik.

3. Isi Paket

Your ROBOTIME Motorized Marble Run Combination Set (Model RBT-LGX02) includes the following main components:

• LGC01 Marble Spaceport Kit: Contains all parts for the motorized Marble Spaceport.
• LGA01 Marble Night City Kit: Contains all parts for the Marble Night City.
• LG01 Link Pack: Contains additional parts to connect the LGC01 and LGA01 models.
• Detailed step-by-step instruction manuals for each kit.
• Necessary accessories (e.g., marbles, motor, wires, LED lights).

Please verify all parts are present and undamaged upon opening the package. Refer to the individual kit manuals for specific part lists.

Gambar: Lebih dariview of the ROBOTIME Marble Run Combination Set components, including the LGC01 Marble Spaceport, LGA01 Marble Night City, and the LG01 Link Pack, ready for assembly.

4. Petunjuk Perakitan

The assembly process for this combination set is extensive and typically requires 10+ hours. Follow the individual instruction manuals provided for the LGC01 Marble Spaceport, LGA01 Marble Night City, and LG01 Link Pack meticulously.

1. Persiapan:
   • Buka kemasan semua komponen dan letakkan pada permukaan yang bersih dan datar.
   • Familiarize yourself with the tools required (not included, e.g., small knife for delicate parts, sandpaper for smoothing edges if needed).
   • Review the instruction manuals for each kit before starting.
2. Identifikasi Bagian:
   • All wooden pieces are laser-cut and numbered. Carefully detach parts from their sheets.
   • Use the provided diagrams to identify each piece.
3. Perakitan Langkah-demi-Langkah:
   • Follow the numbered steps in the individual manuals. Do not skip steps or attempt to assemble out of order.
   • Ensure all connections are secure. Some parts may require gentle force to fit.
   • For the LGC01 Marble Spaceport, pay close attention to the motor and gear assembly.
   • When combining LGC01 and LGA01 using the LG01 Link Pack, refer to the specific linking instructions.
4. Electrical Connections (LGC01):
   • Connect the motor and LED lights as instructed. Ensure correct polarity for batteries (not included).
   • The illuminated base features touch controls for lighting.

Image: The LGC01 Marble Spaceport, a key component of the set, showcasing its complex mechanical design.

Image: The LGA01 Marble Night City, another module in the combination set, featuring its distinct marble run elements.

5. Petunjuk Pengoperasian

Once fully assembled, your ROBOTIME Motorized Marble Run is ready for operation.

1. Nyalakan:
   • Ensure batteries are correctly installed in the LGC01 Marble Spaceport's power unit.
   • Locate the touch sensor on the illuminated base.
   • Tap the sensor once for "Breathing Light" mode.
   • Tap the sensor twice for "Steady Light" mode.
   • A long touch will power off the unit.
2. Penempatan Kelereng:
   • Place the provided marbles at the designated starting point of the marble run.
   • The motorized lift (conveyor belt and drive shaft) will transport the marbles to the top, initiating the cycle.
3. Pengamatan:
   • Observe the marbles as they navigate the various tracks, spirals, and mechanisms.
   • The system is designed for continuous cycling for approximately 10 minutes in certain light modes before requiring a reset or power cycle.

Image: The complete marble run in action, demonstrating the continuous cycle of marbles.

Gambar: Detail view of the conveyor belt and drive shaft, essential components for lifting the marbles.

6. Pemeliharaan

• Pembersihan: Use a soft, dry cloth to gently wipe dust from the wooden surfaces. Avoid using water or cleaning solutions.
• Pelumasan: If any moving parts (gears, axles) become stiff, a small amount of dry lubricant (e.g., graphite powder) can be applied. Avoid oil-based lubricants which may damage the wood.
• Penyimpanan: Store the assembled model in a dry environment away from direct sunlight and extreme temperatures to prevent warping or damage to the wood.
• Penggantian Baterai: Replace batteries in the LGC01 unit when the motor performance degrades or lights dim.

7. Penyelesaian masalah

Gambar: Detail view of the internal mechanisms, useful for troubleshooting alignment and movement issues.

8. Spesifikasi

• Model: RBT-LGX02 (Combination Set)
• Included Models: LGC01 Marble Spaceport, LGA01 Marble Night City, LG01 Link Pack
• Merek: WAKTU ROBO
• Bahan: Basswood, Metal
• Perkiraan Waktu Perakitan: 10+ jam
• Usia yang Direkomendasikan: 14+ years (Adult)
• Number of Pieces (LGC01): 472 wood pieces (total pieces for combination set will be higher)
• Fitur: Motorized marble lift, illuminated base with touch control, intricate gear mechanisms.

9. Garansi dan Dukungan

ROBOTIME provides worry-free assembly support for this 3D puzzle. If you encounter any problems during assembly or operation, or if you have questions regarding missing or damaged parts, please do not hesitate to contact ROBOTIME customer support.

Untuk mendapatkan dukungan, silakan lihat informasi kontak yang tertera pada kemasan produk Anda atau kunjungi situs resmi ROBOTIME. weblokasi.

Garansi Produsen: Other (as per product specifications). Please retain your proof of purchase for any warranty claims.