SIHOO L3D Office Chair Instruction Manual

Perkenalan

This manual provides detailed instructions for the assembly, operation, and maintenance of your SIHOO L3D Office Chair. Designed for ergonomic support and comfort, this chair features a faux leather finish, adjustable backrest, and seat depth. Please read this manual thoroughly before use to ensure proper setup and to maximize your chair's lifespan and performance.

Informasi Keselamatan

• Kapasitas Beban Maksimum: Do not exceed the maximum weight recommendation of 300 pounds (136 kg). Exceeding this limit may cause damage to the chair and potential injury.
• Pastikan semua sekrup dan baut terpasang dengan kencang sebelum digunakan. Periksa secara berkala dan kencangkan kembali jika perlu.
• Jauhkan tangan dan jari dari bagian yang bergerak selama penyetelan untuk mencegah terjepit.
• Gunakan kursi di permukaan yang datar dan stabil untuk mencegahnya terbalik.
• Jangan berdiri di atas kursi.

Petunjuk Perakitan

Assembly typically takes approximately 20-40 minutes. All necessary tools and hardware are included. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

1. Bongkar Komponen: Carefully remove all parts from the packaging. Verify that all components listed in the parts list are present. The hardware (screws, bolts) is typically provided in a blister package with extra pieces.
2. Pasangkan Roda ke Basis: Insert the casters into the holes at the ends of the chair base. Press firmly until they click into place.
3. Pasang Gas Lift ke Alas: Place the gas lift cylinder into the center hole of the wheeled base.
4. Merakit Dudukan dan Sandaran Punggung: Connect the seat cushion and backrest according to the provided diagrams. Ensure all screws are aligned and tightened securely. Some parts may require careful alignment.
5. Pasang Sandaran Tangan: Secure the armrests to the seat and backrest assembly using the provided screws.
6. Hubungkan Rakitan Kursi ke Gas Lift: Letakkan dengan hati-hati jok dan sandaran yang telah dirakit ke dalam tabung gas lift.
7. Pemeriksaan Akhir: Pastikan semua sambungan terpasang erat dan kursi stabil sebelum digunakan.

Image: The SIHOO L3D Office Chair, highlighting its design and adjustability.

Petunjuk Pengoperasian

Menyesuaikan Sandaran

The backrest of the SIHOO L3D chair can be adjusted to three different height levels, providing up to 1.5 inches (approximately 4 cm) of vertical adjustment. To adjust, simply lift the backrest upwards. It will click into place at each level. To lower, lift it past the highest setting, and it will reset to the lowest position.

Adjusting the Seat Depth

Customize your seating experience with the adjustable seat depth, allowing for a maximum adjustment of 1.97 inches (approximately 5 cm). This feature helps you find the perfect fit for your hips and thighs, enhancing comfort and ergonomic support.

Menyesuaikan Tinggi Kursi

The seat height can be adjusted to suit various desk heights and user preferences. The seat height ranges from approximately 16.75 inches (42.5 cm) to 19.75 inches (50 cm) at the center front. Use the lever located under the seat to raise or lower the chair. To raise, lift the lever while taking your weight off the seat. To lower, lift the lever while seated.

Fungsi Berbaring

The chair features a recline function where the backrest can tilt backward. Please note that the recline position is not lockable and will return to an upright position when pressure is released. The recline mechanism offers minimal tension or resistance.

Mobilitas

The chair is equipped with a five-wheel base for easy movement. The casters are designed to roll smoothly on various floor surfaces, including hardwood floors. Avoid lifting the chair by the seat or arms without supporting the base, as the wheeled base may separate.

Pemeliharaan dan Perawatan

• Membersihkan Kulit Imitasi: The premium faux leather surface is designed to be easy to clean and resists stains, scratches, and peeling. For general cleaning, wipe with a soft, damp kain. Untuk noda membandel, gunakan larutan sabun lembut dan segera lap hingga kering. Hindari bahan kimia keras atau pembersih abrasif.
• Perawatan Bingkai: Usap bingkai logam dengan kain lembut dan kering untuk menghilangkan debu.
• Pemeliharaan Kastor: Periksa roda secara berkala untuk memastikan tidak ada rambut atau kotoran yang dapat menghambat pergerakan yang lancar. Bersihkan sesuai kebutuhan.
• Pemeriksaan Perangkat Keras: Regularly inspect all screws and bolts to ensure they remain tight. Re-tighten any loose hardware to maintain stability and safety.
• Hindari sinar matahari langsung: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack. Position the chair away from direct sunlight when possible.

Penyelesaian Masalah

Spesifikasi Produk

Garansi dan Dukungan

For warranty information, technical support, or to inquire about replacement parts, please contact SIHOO customer service directly. Refer to the product packaging or the official SIHOO websitus untuk rincian kontak terkini.

SIHOO Official Weblokasi: Visit the SIHOO Store on Amazon