Milex MIM003

Milex Nordic Ice Machine MIM003 User Manual

Model: MIM003

1. Petunjuk Keselamatan Penting

Please read all instructions carefully before operating the Milex Nordic Ice Machine. Retain this manual for future reference.

  • Pastikan peralatan diletakkan pada permukaan yang stabil dan rata, jauhkan dari sinar matahari langsung dan sumber panas.
  • Jangan merendam kabel daya, steker, atau bagian mana pun dari alat ini ke dalam air atau cairan lainnya.
  • Peralatan ini hanya untuk penggunaan di rumah. Jangan gunakan di luar ruangan.
  • Awasi anak-anak saat alat sedang digunakan.
  • Unplug the ice machine from the power outlet before cleaning or when not in use.
  • Jangan mengoperasikan peralatan apa pun dengan kabel atau steker yang rusak, atau setelah peralatan tersebut mengalami kegagalan fungsi atau telah rusak dengan cara apa pun.
  • Allow the unit to stand upright for at least 2 hours before first use if it has been transported horizontally. This allows the refrigerant to settle.
  • Gunakan hanya air minum di tangki air.
  • Jangan menghalangi lubang ventilasi. Pastikan sirkulasi udara yang memadai di sekitar unit.

2. Produk Lebihview

Familiarize yourself with the components of your Milex Nordic Ice Machine.

Milex Nordic Ice Machine front view

Gambar 2.1: Depan view of the Milex Nordic Ice Machine, showcasing its sleek stainless steel housing and transparent lid.

Komponen utama:

  • Panel Kontrol: Located on the top, with indicator lights and buttons for operation.
  • Tutup Transparan: Memungkinkan viewing of the ice-making process and ice level.
  • Keranjang Es: Keranjang yang dapat dilepas untuk mengumpulkan dan menyimpan es.
  • Tangki Air: Reservoir for water, located beneath the ice basket.
  • sendok es: Included for hygienic ice retrieval.
  • Tiriskan Steker: Terletak di bagian bawah untuk mengalirkan air.

3. Pengaturan

Follow these steps to set up your ice machine for the first time.

  1. Membongkar: Carefully remove the ice machine from its packaging. Remove all packing materials, tape, and labels.
  2. Posisi: Place the ice machine on a flat, stable, and heat-resistant surface. Ensure there is at least 15 cm (6 inches) of space around the unit for proper ventilation.
  3. Berdiri Tegak: If the unit was transported horizontally, allow it to stand upright for at least 2 hours before plugging it in. This ensures the compressor oil settles correctly.
  4. Membersihkan: Before first use, clean the interior of the ice machine as described in the 'Maintenance and Cleaning' section.
  5. Hubungkan Daya: Sambungkan kabel daya ke stopkontak listrik yang diarde.

4. Petunjuk Pengoperasian

Operating your Milex Nordic Ice Machine is straightforward.

Three steps for ice machine operation: Add water, Select ice size, Make ice

Gambar 4.1: Visual guide showing the three main steps: adding water, selecting ice size, and the ice production process.

4.1 Initial Ice Production

  1. Tambahkan air: Open the lid and fill the water tank with potable water up to the 'MAX' fill line. Do not overfill.
  2. Nyalakan: Press the 'POWER' button on the control panel. The power indicator light will illuminate.
  3. Pilih Ukuran Es: Press the 'SELECT' button to choose between small or large ice cubes. The corresponding indicator light will illuminate.
  4. Mulai Siklus: The machine will automatically begin the ice-making cycle. The first batch of ice may take approximately 8-15 minutes, depending on the selected size and ambient temperature.
  5. Memantau: The 'ICE FULL' indicator light will illuminate when the ice basket is full. The machine will pause operation. The 'ADD WATER' indicator light will illuminate when the water tank needs refilling.
  6. Ambil Es: Use the provided ice scoop to remove ice from the basket. Once ice is removed, the machine will resume operation if water is present.
Close-up of the Milex Nordic Ice Machine control panel and ice cubes in the basket

Gambar 4.2: Terperinci view of the control panel with indicator lights and freshly made bullet-shaped ice cubes.

4.2 Smart Alerts

  • Tambahkan Indikator Air: When this light illuminates, the water level in the tank is low. Refill the water tank to continue ice production.
  • Indikator Es Penuh: When this light illuminates, the ice basket is full. Remove ice to allow the machine to resume operation.

5. Perawatan dan Pembersihan

Regular cleaning ensures optimal performance and extends the life of your ice machine.

5.1 Pembersihan Harian

  • After each use, unplug the unit.
  • Drain any remaining water from the water tank by removing the drain plug at the bottom of the unit.
  • Wipe the interior with a soft cloth and a mild detergent solution. Rinse thoroughly.
  • Dry all surfaces completely before storing.

Pembersihan 5.2 Bulanan

  • Prepare a cleaning solution of water and white vinegar (1:1 ratio) or a commercial ice machine cleaner.
  • Tuang larutan ke dalam tangki air.
  • Run a few ice-making cycles (discard the ice produced during this cleaning process).
  • Drain the solution completely and rinse the water tank thoroughly with clean water several times.
  • Lap bagian luar dengan iklanamp kain.

Peringatan: Do not use abrasive cleaners or sharp objects to clean the ice machine, as this may damage the surfaces.

6. Penyelesaian masalah

Lihat bagian ini untuk masalah umum dan solusinya.

MasalahKemungkinan PenyebabLarutan
Ice machine not turning onTidak ada pasokan dayaPeriksa apakah kabel daya telah terpasang dengan benar ke stopkontak yang berfungsi.
'ADD WATER' indicator is onTangki air kosong atau hampir kosongRefill the water tank with potable water up to the 'MAX' line.
'ICE FULL' indicator is onKeranjang es sudah penuhRemove ice from the basket. The machine will resume operation.
Tidak ada produksi esInsufficient water, high ambient temperature, or air blockageEnsure water tank is full. Place the machine in a cooler environment. Check for proper ventilation.
Es batunya terlalu kecil atau menggumpalWater temperature too high, or first cycleUse colder water. The first few cycles may produce smaller ice. Ensure the machine has proper ventilation.

7. Spesifikasi

Technical details for the Milex Nordic Ice Machine MIM003.

  • Model: MIM003
  • Kekuatan: Tegangan 220-240V, 50Hz
  • Kapasitas Tangki Air: 2.8 liter
  • Kapasitas Produksi Es: Up to 15kg per day
  • Kapasitas Penyimpanan Es: Hingga 1.5kg
  • Waktu Siklus Es: 8-10 minutes per cycle (9 ice bullets)
  • Ice Options: Large or Small bullet-shaped ice
  • Bahan: Perumahan Baja Tahan Karat
  • Dimensions (Box): Ukuran 458mm x 290mm x 462mm
  • Berat Barang: 12 kg

8. Garansi dan Dukungan Pelanggan

For warranty information, technical assistance, or customer support, please contact Milex customer service. Refer to your purchase documentation for specific warranty terms and contact details.

Anda biasanya dapat menemukan informasi kontak dukungan di situs web resmi produsen. websitus atau melalui pengecer Anda.

© 2024 Milex. Semua hak dilindungi undang-undang.