Elecvos Hidden Camera Detector User Manual

1. Pendahuluan dan Selesaiview

The Elecvos Hidden Camera Detector is a portable, rechargeable anti-spy device designed to accurately locate hidden cameras, listening devices, RF signals, and GPS trackers. Utilizing sophisticated wireless and infrared scanning technology with a highly sensitive chip, it offers a wide detection range and adjustable sensitivity for various scenarios, ensuring privacy and security in locations like hotels, bathrooms, offices, and cars.

Figure 1: Elecvos Hidden Camera Detector in use, highlighting its detection capabilities.

2. Apa yang ada di dalam kotak

• 1 x Elecvos Hidden Camera Detector
• 1 x Kabel Pengisian Daya USB
• 1 x Panduan Pengguna

3. Fitur Produk

• Intelligent Camera Detection: Employs sophisticated wireless and infrared scanning technology with a highly sensitive chip to accurately locate hidden devices within an efficient range of 0-10 meters, protecting your privacy and security.
• Rentang Deteksi Luas: Detects wireless signals from 100Mhz to 8Ghz, covering most WiFi devices like spy cameras. Also supports scanning for pinhole cameras via RF light and GPS trackers via magnetic detection. Sensitivity is adjustable in 5 levels.
• Desain Ringan & Tahan Lama: Made from advanced high-quality ABS material, compact (0.63x0.83x3.46 inches) and lightweight (0.05 lb), making it highly portable for travel, hotel stays, bathrooms, conference rooms, and dressing rooms.
• High Capacity Rechargeable Battery: Built-in 800mAh battery provides up to 30 days standby time and 25 hours of continuous use on a single 1.5-hour charge, ensuring long-lasting support for privacy protection.

Figure 2: Advanced technology for faster and more accurate detection.

Figure 3: The detector as a privacy specialist for various environments.

Gambar 4: Contohamples of devices the detector can identify, emphasizing privacy invasion.

Figure 5: Compact design for easy portability, fitting in pockets or bags.

Figure 6: Long-lasting battery performance for extended use.

4. Pengaturan

4.1 Mengisi Daya Perangkat

Before first use, fully charge the Elecvos Hidden Camera Detector. A full charge takes approximately 1.5 hours.

1. Connect the provided USB charging cable to the charging port on the detector.
2. Hubungkan ujung lain kabel USB ke adaptor daya USB standar (tidak disertakan) atau port USB komputer.
3. The indicator lights will show charging status. Once fully charged, the lights will indicate completion or turn off.

5. Petunjuk Pengoperasian

The Elecvos detector features intuitive controls for easy operation. Refer to the diagram below for button identification.

Figure 7: Device components and controls for easy operation.

5.1 Daya Hidup/Mati

• Tekan dan tahan tombol AKTIF/NONAKTIF button to power the device on or off.

5.2 RF Signal Detection Mode (Wireless Devices)

This mode is used to detect wireless signals emitted by hidden cameras, listening devices, and WiFi-enabled spy gadgets.

1. Power on the device. The sensitivity display lights will illuminate.
2. Gunakan Penyesuaian Sensitivitas buttons to adjust the detection range. Higher sensitivity (more lights) means a wider detection range but may pick up more ambient signals. Lower sensitivity (fewer lights) narrows the range for precise localization.
3. Slowly sweep the detector around the area you wish to scan.
4. The device will beep and the sensitivity display lights will increase as it gets closer to a wireless signal source.

Figure 8: Detecting wireless signals in a hotel room environment.

5.3 Infrared Scanning Mode (Pinhole Cameras)

This mode helps locate hidden pinhole cameras by detecting their lenses' reflections.

1. Tekan tombol Tombol mode to switch to Infrared Scanning mode. The Infrared lights will activate.
2. Lihat melalui Infrared lens finder on the top of the device.
3. Slowly scan the area, looking for any bright red dots or reflections through the viewfinder. These reflections indicate the presence of a camera lens.

5.4 Magnetic Detection Mode (GPS Trackers)

This mode is specifically designed to find magnetic GPS trackers, often attached to vehicles.

1. Tekan tombol Tombol mode repeatedly until you enter Magnetic Detection mode (refer to indicator lights or manual for specific indication).
2. Move the detector close to surfaces where a magnetic tracker might be hidden, such as under a car, inside car seats, or under desks.
3. The device will alert you (e.g., beep, vibrate, or light up) when it detects a magnetic field.

5.5 Fungsi Senter

• Tekan tombol Tombol senter (often integrated with the ON/OFF or a dedicated button) to turn the built-in flashlight on or off. This can be useful for illuminating dark areas during inspection.

6. Pemeliharaan

• Pembersihan: Lap perangkat dengan kain lembut dan kering. Jangan gunakan pembersih atau pelarut abrasif.
• Penyimpanan: Simpan detektor di tempat yang sejuk dan kering, jauh dari sinar matahari langsung dan suhu ekstrem.
• Perawatan Baterai: Untuk masa pakai baterai yang optimal, isi daya perangkat secara teratur, meskipun tidak sering digunakan. Hindari mengosongkan baterai sepenuhnya dalam jangka waktu yang lama.

7. Penyelesaian masalah

8. Spesifikasi

9. Garansi dan Dukungan Pelanggan

Elecvos is committed to providing a lifetime after-sale service on all of its products. A professional customer support team is available online 24/7 to answer any questions or concerns you may have.

For support, please contact us via Amazon message.