ECOELER YM2601-WH

ECOELER Motion Sensor Dimmer Switch (Model YM2601-WH) Instruction Manual

Your guide to installation, operation, and maintenance of your ECOELER Motion Sensor Dimmer Switch.

1. Pendahuluan

The ECOELER Motion Sensor Dimmer Switch provides convenient, hands-free lighting control with adjustable settings for various environments. This device integrates a motion sensor and an ambient light sensor to automate lighting based on presence and light levels, while also offering dimming capabilities for compatible bulbs. It is designed for single-pole circuits and requires a neutral wire for installation.

ECOELER PIR Motion Sensor Dimmer Switch with icons for advanced motion sensor, ambient light sensor, timer delay, fully dimmable, energy saving, and fire resistant features.

Gambar: Lebih dariview of the ECOELER PIR Motion Sensor Dimmer Switch highlighting its key features.

2. Fitur Produk

Kontrol Bebas Genggam: Automatically detects presence and ambient light to activate or deactivate lights.
Customization Settings: Selectable occupancy (Auto ON, Auto OFF) or vacancy (Manual ON, Auto OFF) sensor modes. Adjustable time delay (15 sec, 1min, 5min, 15min, 30min).
Digital Dimmer: MCU-based control for smooth, flicker-free dimming with wide compatibility for various LED types.
Kompatibilitas Universal: Works with dimmable LED/CFL (up to 150W) and Incandescent/Halogen (up to 300W) bulbs.
Single Pole Control: Designed for single-pole circuits only. Not suitable for 3-way circuits.
Instalasi Mudah: Fits standard junction boxes and requires a neutral wire.
Desain Tahan Lama: Constructed with tough thermoplastic housing for impact and scratch resistance.

Diagram showing the adjustable settings on the ECOELER Motion Sensor Dimmer Switch, including dimmer level, time delay, sensitivity, ambient light, OCC/VAC mode, darkest brightness, and ON/OFF button.

Gambar: Detail view of the product features and adjustable settings on the dimmer switch.

3. Informasi Keselamatan

WARNING: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring!

Perangkat ini dimaksudkan untuk dipasang sesuai dengan Kode Listrik Nasional dan peraturan setempat.
Disarankan agar teknisi listrik yang berkualifikasi melakukan pemasangan ini.
Gunakan kabel tembaga saja.
A neutral wire is required for proper operation.
This switch is for single-pole applications only and is NOT suitable for 3-way circuits.

4. Isi Paket

ECOELER Motion Sensor Dimmer Switch
Pelat Dinding
Petunjuk Instalasi (panduan ini)
Sekrup Pemasangan
Tutup Kabel

Image showing the ECOELER Motion Sensor Dimmer Switch with its dimensions, included wall plate, screws, and wiring caps.

Gambar: Dimensi produk dan aksesori yang disertakan.

5. Spesifikasi

Atribut	Nilai
Nomor Model	YM2601-WH
Volume Operasitage	120 Volt (AC)
Peringkat Saat Ini	10 Amps
Maks Wattage (LED/CFL yang dapat diredupkan)	150W
Maks Wattage (Lampu Pijar/Halogen)	300W
Jenis Sakelar	Single-pole (1-way)
Jenis Pemasangan	Dudukan Dinding
Bahan	Copper, Metal, Polycarbonate
Dimensi (P x L x T)	Ukuran 6.86x4.2x11.48 cm
Sertifikasi	ETL, FCC

Image illustrating universal compatibility of the dimmer switch with incandescent, CFL, and dimmable LED lamps, showing their respective wattage peringkat.

Image: Universal compatibility with various bulb types and their wattage peringkat.

6. Instalasi

Follow these steps carefully to install your ECOELER Motion Sensor Dimmer Switch. Ensure power is OFF before beginning.

6.1 Pra-Instalasi

Matikan Daya: Locate your circuit breaker or fuse box and turn off the power to the switch location. Verify power is off using a voltage penguji.
Hapus Sakelar Lama: Unscrew and carefully remove the existing wall plate and switch from the electrical box. Do not disconnect wires yet.
Identifikasi Kabel: Identify the following wires in your electrical box:
- Hot (Line) Wire: Menyalurkan daya dari pemutus sirkuit.
- Beban Kawat: Terhubung ke perlengkapan lampu.
- Kabel Netral: (Required) Typically white, often capped together with other neutral wires.
- Kabel tanah: (Recommended) Typically bare copper or green.

6.2 Petunjuk Pengkabelan

Connect the wires from the ECOELER Motion Sensor Dimmer Switch to the corresponding wires in your electrical box using the provided wiring caps.

Hubungkan Hitam wire from the switch to the Saluran Telepon Panas kawat dari dinding.
Hubungkan Merah wire from the switch to the Memuat kawat dari dinding.
Hubungkan Putih wire from the switch to the Netral kawat dari dinding.
Hubungkan Hijau wire from the switch to the Tanah kawat dari dinding.

Wiring diagram for the ECOELER Motion Sensor Dimmer Switch, showing connections for Hot (Black), Load (Red), Neutral (White), and Ground (Green) wires in a single-pole circuit.

Image: Wiring guide for single-pole installation, showing connections for Hot, Load, Neutral, and Ground wires.

6.3 Mounting and Finishing

Carefully push all wired connections into the electrical box.
Mount the switch into the electrical box using the provided screws.
Pasang pelat dinding.
Nyalakan kembali aliran listrik di pemutus sirkuit.

Video: Real installation and finished look of the ECOELER Motion Sensor Dimmer Switch.

7. Petunjuk Pengoperasian

The ECOELER Motion Sensor Dimmer Switch offers flexible operation modes and customizable settings.

7.1 Sensor Modes (Occupancy vs. Vacancy)

The switch can be configured for two primary sensor modes:

Mode Pendeteksi Keberadaan (Aktif Otomatis, Nonaktif Otomatis): The lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected.
Mode Kekosongan (Aktif Manual, Mati Otomatis): The lights must be manually turned ON, but will automatically turn OFF after a set time delay when no motion is detected.

Diagram illustrating the difference between Occupancy Mode (Auto ON, Auto OFF) and Vacancy Mode (Manual ON, Auto OFF) for the sensor switch.

Image: Comparison of Occupancy and Vacancy sensor modes.

Video: Explanation of motion sensor switch operating modes and ambient light level detection.

7.2 Menyesuaikan Pengaturan

The switch features adjustable dials for Time Delay, Sensitivity, and Ambient Light Level. These are typically located under a removable cover on the switch face.

Diagram of the programmable sensor switch showing dials for Time, Sense (Sensitivity), and Light (Ambient Light Level), along with Menu and Select buttons for mode selection.

Image: Programmable sensor switch with adjustable dials for time, sensitivity, and light level.

Waktu Tunda: Adjust how long the lights remain ON after the last detected motion. Options include 15 seconds (Test), 1 minute, 5 minutes, 15 minutes, and 30 minutes.
Kepekaan: Adjust the motion detection range. Higher sensitivity detects motion over a larger area.
Ambient Light Level: In Occupancy mode, this setting determines the ambient light threshold below which the sensor will turn on the lights. For example, set to 'Dark' for lights to only turn on in low light conditions.

Image showing the adjustable time delay, sensitivity, and ambient light level settings on the motion sensor switch.

Image: Adjustable settings for time delay, sensitivity, and ambient light level.

7.3 Fungsi Peredupan

Use the dimmer button (typically a rocker switch or slider) to manually adjust the brightness of the connected lights. The digital control ensures smooth, flicker-free dimming.

Image demonstrating the digital dimming feature of the switch, showing different light levels in a study, dining room, and children's room.

Image: Digital dimming in action, illustrating various brightness levels.

8. Penyelesaian masalah

Lampu tidak menyala:
- Pastikan daya pada pemutus sirkuit dalam keadaan AKTIF.
- Verify all wiring connections are secure and correct (Hot, Load, Neutral, Ground).
- Check if the bulb is working and properly installed.
- Adjust the ambient light level setting; if set too high, lights may not turn on in bright conditions.
- Increase sensitivity if motion is not being detected.
Lights do not turn OFF:
- Ensure no continuous motion is occurring within the sensor's range.
- Check the time delay setting; a longer delay will keep lights on for longer.
- Reduce sensitivity if the sensor is detecting motion from outside the desired area.
Lights flicker or dim improperly:
- Ensure you are using dimmable LED/CFL or incandescent/halogen bulbs. Non-dimmable bulbs may flicker.
- Verifikasi total airtage of connected bulbs does not exceed the switch's maximum rating (150W for LED/CFL, 300W for Incandescent/Halogen).

9. Pemeliharaan

To ensure optimal performance and longevity of your ECOELER Motion Sensor Dimmer Switch:

Pembersihan: Wipe the switch and wall plate with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
Hindari Hambatan: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block motion detection.
Pemeriksaan Rutin: Periodically check the switch for any loose connections or visible damage. If any issues are found, turn off power at the breaker and consult a qualified electrician.

10. Garansi dan Dukungan

The ECOELER Motion Sensor Dimmer Switch comes with a Garansi 1 tahun, providing peace of mind regarding its quality and durability. For technical support, warranty claims, or any questions regarding your product, please contact ECOELER customer service.

Pabrikan: ECOELER ELECTRIC INC

Kontak: SUPPORTS@ECOELER.COM

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.