JONSBO ZB-120B 120mm PC Case Fan Instruction Manual

1. Pendahuluan

Thank you for choosing the JONSBO ZB-120B 120mm PC Case Fan. This fan is designed to provide efficient cooling for your computer system while offering customizable ARGB lighting effects. Its unique infinity mirror design and integrated wiring simplify installation and enhance the aesthetic appeal of your PC build. Please read this manual thoroughly before installation and use to ensure proper operation and longevity of the product.

2. Informasi Keselamatan

Harap perhatikan tindakan pencegahan keselamatan berikut:

• Pastikan sistem komputer Anda dimatikan dan dicabut dari stopkontak sebelum pemasangan atau perawatan.
• Tangani kipas dan komponennya dengan hati-hati untuk menghindari kerusakan.
• Do not attempt to modify the fan or its wiring. Unauthorized modifications may void the warranty and pose electrical hazards.
• Jauhkan kipas angin dari cairan dan kelembapan berlebihan.
• This product is intended for use within a computer chassis.

3. Isi Paket

Verifikasi bahwa semua komponen ada dalam paket:

• JONSBO ZB-120B 120mm PC Case Fan (1 unit)
• Sekrup Pemasangan

Image: JONSBO ZB-120B fan with its integrated cables for power and ARGB connection.

4. Fitur Produk

The JONSBO ZB-120B fan offers a blend of performance and aesthetics:

• Axis / 4-Sides Infinity Mirror: Features a front thousand-layer mirror illusion and internal/external dual-zone infinity mirror for comprehensive lighting effects.
• Pengkabelan Sederhana: An integrated joint structure allows for a single-line connection to the motherboard, simplifying cable management.
• Daisy-Chain ARGB: 5V ARGB plug with male and female design enables series connection with other compatible lighting devices.
• Kontrol PWM: 4-Pin PWM connector allows for precise fan speed control based on system temperature, optimizing cooling and noise levels.
• Aliran Udara Optimal: Operates at a maximum rotational speed of 2400 RPM for effective heat dissipation.
• Konstruksi Tahan Lama: Terbuat dari plastik berkualitas tinggi untuk keandalan.

Image: Illustration of the front thousand-layer mirror illusion, showcasing the depth and complexity of the ARGB lighting effect.

Image: Diagram illustrating the simplified wiring design, showing a single cable connection for multiple fans to the motherboard.

5. Pengaturan dan Instalasi

Follow these steps to install your JONSBO ZB-120B PC Case Fan:

1. Siapkan Sistem Anda: Power off your computer and unplug it from the power source. Open your PC case to access the fan mounting locations.
2. Pasang Kipas: Position the fan in your desired location (e.g., front, top, rear, bottom of the case). Use the included mounting screws to secure the fan to the chassis. Ensure the fan is oriented correctly for desired airflow (intake or exhaust).
3. Hubungkan Daya (PWM): Locate a 4-Pin PWM fan header on your motherboard. Connect the fan's 4-Pin PWM cable to this header. This allows the motherboard to control the fan speed.
4. Hubungkan Pencahayaan ARGB: Locate a 3-Pin 5V ARGB header on your motherboard. Connect the fan's 3-Pin ARGB cable to this header. If you have multiple JONSBO ZB series fans, you can daisy-chain them using the male and female ARGB connectors, then connect the last fan in the chain to the motherboard header. Ensure you connect to a 5V ARGB header, not a 12V RGB header, to prevent damage.
5. Manajemen Kabel: Route the cables neatly to avoid interference with other components and to improve airflow within the case.
6. Tutup Casing dan Nyalakan Daya: Once all connections are secure, close your PC case, plug in the power, and power on your system.

Image: Multiple JONSBO ZB-120B fans installed in a computer case, showcasing their ARGB lighting and placement.

Image: Illustration of ARGB lighting synchronization, indicating compatibility with various motherboard RGB software.

6. Petunjuk Pengoperasian

After successful installation, the fan will operate automatically. Fan speed is controlled via the 4-Pin PWM connection, typically managed by your motherboard's BIOS/UEFI settings or dedicated software. ARGB lighting effects are controlled via the 3-Pin 5V ARGB connection, usually through your motherboard's RGB software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome Sync) or a compatible external ARGB controller.

7. Pemeliharaan

Regular maintenance helps ensure optimal performance and extends the lifespan of your fan:

• Pembersihan: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the system is powered off and unplugged before cleaning.
• Inspeksi: Check for any loose connections or signs of wear on the cables.

8. Penyelesaian masalah

If you encounter issues with your JONSBO ZB-120B fan, consider the following:

• Kipas Tidak Berputar:
  • Check if the 4-Pin PWM cable is securely connected to the motherboard fan header.
  • Verify that the fan header is enabled in your motherboard's BIOS/UEFI settings.
  • Uji kipas pada header kipas yang berbeda atau dengan pengontrol kipas jika tersedia.
• Pencahayaan ARGB Tidak Berfungsi:
  • Ensure the 3-Pin 5V ARGB cable is correctly connected to a 5V ARGB header on your motherboard or controller. Jangan hubungkan ke header RGB 12V.
  • Check your motherboard's RGB software to ensure lighting effects are enabled and configured.
  • If daisy-chaining, ensure all connections between fans are secure.
• Kebisingan Berlebihan:
  • Pastikan kipas terpasang dengan aman dan tidak bergetar terhadap casing.
  • Check for any obstructions (e.g., cables) hitting the fan blades.
  • Adjust fan speed settings in your motherboard's BIOS/UEFI or software.

9. Spesifikasi

Image: Comparison table showing noise levels, rotational speeds, and air volume for regular and reverse fan blade designs.

10. Garansi dan Dukungan

Untuk informasi garansi dan dukungan teknis, silakan merujuk ke situs resmi Jonsbo. websitus web atau hubungi penjual Anda. Simpan bukti pembelian Anda untuk klaim garansi.