DEVAISE Ergonomic Mesh Office Chair with Footrest

1. Pendahuluan

Thank you for choosing the DEVAISE Ergonomic Mesh Office Chair with Footrest, Model ABGY015. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Designed for comfort and support, this chair features an ergonomic backrest, adjustable headrest, lumbar support, and a retractable footrest to enhance your work or relaxation experience.

Image 1.1: The DEVAISE Ergonomic Mesh Office Chair with Footrest, showcasing desain dan fiturnya.

2. Informasi Keselamatan

• Baca semua instruksi dengan seksama sebelum perakitan dan penggunaan.
• Ensure all components are securely fastened before using the chair.
• Jangan berdiri di atas kursi atau menggunakannya sebagai pijakan.
• Jangan melebihi kapasitas berat maksimum 300 pon.
• Jauhkan anak-anak dan hewan peliharaan dari kursi selama perakitan.
• Hindari memaparkan kursi langsung ke sinar matahari atau suhu ekstrem untuk mencegah kerusakan material.
• Gunakan di permukaan yang rata untuk mencegah terguling.

3. Isi Paket

Harap pastikan semua komponen tersedia sebelum memulai perakitan. Jika ada komponen yang hilang atau rusak, hubungi dukungan pelanggan.

• Perakitan Sandaran
• Seat Cushion with Armrests and Footrest
• Sandaran Kepala
• Basis Bintang
• Gas Lift Cylinder (SGS Class 4)
• Roda (5 buah)
• Plat Mekanisme
• Paket Perangkat Keras (sekrup, ring, kunci Allen)
• Manual Instruksi

4. Petunjuk Perakitan

Proses perakitan biasanya memakan waktu sekitar 20 menit. Ikuti langkah-langkah ini dengan cermat.

Langkah 1: Pasang Basis

1. Masukkan kelima roda ke dalam lubang di ujung setiap kaki alas bintang. Dorong dengan kuat hingga berbunyi klik dan terpasang dengan benar.
2. Masukkan silinder pengangkat gas ke dalam lubang tengah alas berbentuk bintang.

Image 4.1: The assembled chair base with casters.

Image 4.2: The SGS Class 4 Gas Lift cylinder.

Step 2: Attach the Mechanism Plate to the Seat Cushion

1. Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion.
2. Secure the mechanism plate using the provided screws and Allen wrench. Ensure the front of the mechanism faces the front of the seat.

Step 3: Attach the Backrest to the Seat Cushion

1. Align the backrest with the mounting brackets on the seat cushion.
2. Secure the backrest using the designated screws.

Step 4: Attach the Headrest

1. Geser sandaran kepala ke dalam slot yang telah ditentukan di bagian atas sandaran punggung.
2. Adjust to your preferred height and angle.

Step 5: Connect the Seat Assembly to the Base

1. Letakkan dengan hati-hati kursi dan sandaran yang telah dirakit ke dalam tabung gas lift, pastikan posisinya terpusat dan stabil.
2. Apply downward pressure to secure the connection.

Once assembled, test all functions and adjustments to ensure proper operation.

5. Petunjuk Pengoperasian

Your DEVAISE office chair offers multiple adjustments for personalized comfort.

5.1. Penyesuaian Tinggi Kursi

To adjust the chair height, locate the lifting handle under the right side of the seat. Pull the handle up while seated to lower the chair, or pull it up while standing to raise the chair. Release the handle at the desired height.

Image 5.1: Illustration of the adjustable height and tilt-locking functions.

5.2. Backrest Recline and Tilt-Lock Function

The backrest can recline and lock at any angle within 145°. To recline, pull the tilt handle (usually located next to the height adjustment lever) outwards. Lean back to the desired angle, then push the handle inwards to lock the position. To unlock and return to an upright position, pull the handle outwards again and lean forward slightly.

5.3. Sandaran Kepala yang Dapat Disesuaikan

The headrest can be adjusted vertically by pulling it up or pushing it down (up to 3.7 inches). It can also rotate 45° to provide optimal neck support. Adjust it to align with the curve of your neck.

Image 5.2: Visual guide for adjusting the headrest's height and rotation.

5.4. Penopang Pinggang yang Dapat Diatur

The chair features adjustable lumbar support to help maintain proper spinal alignment. Locate the adjustment knob or lever on the backrest and rotate or slide it to increase or decrease the lumbar curve to suit your preference.

5.5. Sandaran Kaki yang Dapat Ditarik

For relaxation, pull out the footrest located under the seat. Extend it fully and place your legs on it. When not in use, push it back under the seat until it is fully retracted.

6. Pemeliharaan

• Pembersihan: Bersihkan dengan iklanamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the mesh or other materials.
• Inspeksi: Periksa semua sekrup dan baut secara berkala untuk memastikan kekencangannya. Kencangkan kembali jika perlu.
• Kastor: Keep casters free of debris (hair, dust) to ensure smooth movement and prevent floor scratches.
• Angkat Gas: Do not attempt to disassemble the gas lift cylinder.

7. Penyelesaian masalah

8. Spesifikasi

• Merek: MENYINGKIRKAN
• Nama Model: ABGY015 Home Office Desk Chair
• Warna: Hitam
• Dimensi Produk: 23.2"Panjang x 24"Lebar x 48"T
• Rekomendasi Berat Maksimal: 300 pon
• Kembali gaya: Bagian Belakang Padat (Jaring)
• Kedalaman Kursi: 19.9 inci
• Mengisi Bahan: Foam (28D high-density)
• Angkat Gas: SGS Class 4
• Posisi Berbaring: Up to 145° with tilt-lock
• Berat Barang: 36.6 pon
• Waktu Perakitan: Sekitar 20 menit

Gambar 8.1: Dimensi produk terperinci.

9. Garansi dan Dukungan

This DEVAISE office chair is backed by a garansi dua tahun terhitung sejak tanggal pembelian. Garansi ini mencakup cacat produksi dan kekurangan material dalam penggunaan normal.

For warranty claims, missing parts, or any other inquiries, please contact DEVAISE customer support. Have your purchase receipt and model number (ABGY015) ready when contacting support.

You can find more information and contact details on the official DEVAISE websitus web atau melalui portal layanan pelanggan pengecer Anda.