NARWAL Freo S Robot Vacuum Accessories Kit

Perkenalan

This manual provides detailed instructions for the installation, usage, and maintenance of the NARWAL Freo S Robot Vacuum Accessories Kit. This kit includes essential replacement parts to ensure your NARWAL Freo S robot vacuum cleaner maintains optimal performance.

Isi Paket

Please verify that all items are present in your accessory kit:

• 1 x Roller Brush
• 2 x Side Brushes (Left and Right)
• 2 x Saringan

Image: Contents of the NARWAL Freo S Robot Vacuum Accessories Kit.

Petunjuk Instalasi

Ensure the robot vacuum is powered off and disconnected from its charging station before performing any installation or replacement procedures.

1. Replacing the Roller Brush

1. Turn the robot vacuum upside down on a flat, stable surface.
2. Locate the brush guard cover, usually secured by two tabs or screws. Press the tabs or unscrew to remove the cover.
3. Lift out the old roller brush.
4. Insert the new roller brush, ensuring the square end fits into the corresponding slot and the round end with the bearing clicks into place.
5. Replace the brush guard cover and secure it.

Image: Underside of the robot vacuum, illustrating the roller brush area.

2. Mengganti Sikat Samping

1. Balikkan robot penyedot debu tersebut.
2. Locate the side brushes. They are typically held in place by a single screw.
3. Use a screwdriver to remove the screw and detach the old side brush.
4. Align the new side brush with the post and secure it with the screw. Ensure the correct brush (L for left, R for right) is installed if marked.

Image: Robot vacuum in operation, showing the side brushes.

3. Replacing the Filters

1. Open the top cover of the robot vacuum to access the dustbin.
2. Buang tempat sampah dari robot.
3. Open the dustbin cover to reveal the filter compartment.
4. Lepaskan filter lama dengan menariknya keluar.
5. Insert the new filter into the compartment, ensuring it is seated correctly.
6. Close the dustbin cover, reinsert the dustbin into the robot, and close the top cover.

Image: Accessing the dustbin and filter compartment of the robot vacuum.

Usage Guidelines and Replacement Frequency

To maintain optimal cleaning performance and extend the lifespan of your NARWAL Freo S robot vacuum, it is recommended to replace accessories regularly.

• sikat rol: Replace every 6-12 months, or sooner if visible wear or damage occurs.
• Sikat Samping: Replace every 3-6 months, or sooner if bristles are bent, worn, or missing.
• Saringan: Replace every 2-3 months, or more frequently if you have pets or experience high dust levels.

Actual replacement frequency may vary based on usage habits and environment.

Pemeliharaan

Regular cleaning of your accessories will help prolong their effectiveness between replacements.

• sikat rol: Remove hair and debris tangled around the brush and its ends weekly. A cleaning tool (often included with the robot) can assist.
• Sikat Samping: Check for tangled hair or debris weekly and remove as needed.
• Saringan: Tap the filter gently over a trash can to remove dust and debris weekly. Do not wash filters with water unless explicitly stated by the manufacturer, as this can damage them.

Penyelesaian Masalah

If you encounter issues after replacing accessories, consider the following:

• Brush not spinning: Ensure the roller brush and side brushes are correctly installed and free from obstructions. Check if the brush guard cover is properly secured.
• Daya hisap berkurang: A clogged filter is a common cause. Ensure the new filter is clean and properly seated.
• Suara yang tidak biasa: Check all brushes for tangled hair or foreign objects. Ensure all parts are securely in place.
• Robot error messages: Refer to your main NARWAL Freo S robot vacuum manual for specific error codes. Ensure genuine NARWAL accessories are used.

Spesifikasi

Nama Model: YJCC023

Merek: NARWA

Dimensi Produk: Approximately 2.54 x 2.54 x 2.54 cm (individual components vary)

Berat Barang: 180 gram (total perlengkapan)

Garansi dan Dukungan

NARWAL accessories are designed for durability and performance. For specific warranty information regarding this accessory kit, please refer to the warranty policy provided with your original NARWAL Freo S robot vacuum or visit the official NARWAL weblokasi.

For technical support, troubleshooting assistance, or to purchase additional genuine NARWAL accessories, please contact NARWAL customer service or visit their official support channels. Using non-genuine parts may void your robot vacuum's warranty and affect its performance.

NARWAL Official Weblokasi: www.narwal.com