SACOSDING FB0047

SACOSDING FB0047 Magnetic Bead Analog Watch Instruction Manual

Model: FB0047

Perkenalan

Thank you for choosing the SACOSDING FB0047 Magnetic Bead Analog Watch. This timepiece features a unique magnetic bead system for time display, combining innovative design with reliable quartz movement. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your watch to ensure optimal performance and longevity.

SACOSDING FB0047 Magnetic Bead Analog Watch

Image: The SACOSDING FB0047 Magnetic Bead Analog Watch, showcasing its unique dial and leather strap.

Pengaturan

1. Mengatur Waktu

  1. Temukan mahkota di sisi kanan casing arloji.
  2. Tarik perlahan kenop ke arah luar hingga ke posisi pengaturan waktu. Anda mungkin akan merasakan bunyi klik kecil.
  3. Rotate the crown clockwise or counter-clockwise to adjust the magnetic beads to the correct time. The inner bead indicates minutes, and the outer bead indicates hours.
  4. Once the time is set, push the crown back into its original position firmly. Ensure it is fully pushed in to maintain water resistance.

2. Mengenakan Jam Tangan

Adjust the leather strap to a comfortable fit around your wrist. The strap should be snug enough to prevent the watch from sliding freely but not so tight as to restrict circulation.

Watch on a wrist

Image: The SACOSDING watch comfortably worn on a wrist, demonstrating proper fit.

Petunjuk Pengoperasian

Membaca Waktu

The SACOSDING FB0047 watch utilizes a unique magnetic bead system to display time. The dial features Roman numerals for hours and a track for minutes. There are two suspended magnetic balls:

  • Itu inner magnetic bead menunjukkan menit.
  • Itu outer magnetic bead menunjukkan jam.

The watch displays time in a 12-hour format. To read the time, observe the position of each magnetic bead relative to the Roman numerals and minute markers on the dial.

Diagram showing how to read time on the magnetic bead watch

Image: A diagram illustrating how to read the time on the SACOSDING magnetic bead watch. The inner bead points to minutes, and the outer bead points to hours, shown in a 12-hour format.

Pemeliharaan

1. Pembersihan

Untuk menjaga penampilan jam tangan Anda, bersihkan casing dan tali jam secara teratur dengan kain lembut dan kering. Untuk tali jam kulit, hindari kelembapan berlebihan dan bahan kimia keras, yang dapat menyebabkan kerusakan atau perubahan warna.

2. Tahan Air

This watch is rated for 30 meters (3 ATM) water resistance. This means it is suitable for daily use, such as hand washing, rain, or accidental splashes. It is tidak cocok for swimming, diving, showering, or any activities involving prolonged water immersion or exposure to hot water/steam. Always ensure the crown is fully pushed in to maintain water resistance.

Jam tangan terendam air, menunjukkan ketahanan air hingga 30M

Image: The SACOSDING watch partially submerged in water, illustrating its 30-meter water resistance rating for splashes and rain.

3. Penggantian Baterai

The watch is powered by a quartz movement, which requires a battery. When the watch stops or the time becomes inconsistent, it may be time for a battery replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

4. Penyimpanan

When not in use, store your watch in a dry place away from direct sunlight, extreme temperatures, and strong magnetic fields to prevent damage to the movement and magnetic beads.

Penyelesaian Masalah

  • Jam tangan tidak menunjukkan waktu yang akurat:

    Ensure the crown is fully pushed in. If the issue persists, the battery may need replacement. Consult a professional watch technician.

  • Magnetic beads are stuck or not moving:

    This could be due to exposure to a very strong external magnetic field. Try gently shaking the watch to dislodge the beads. If they remain stuck, contact customer support.

  • Kondensasi di dalam jam tangan:

    This indicates a breach in the watch's water resistance. Avoid further contact with water and seek immediate professional service to prevent internal damage.

Spesifikasi

Detailed specifications of the SACOSDING FB0047 watch

Image: A visual representation of the SACOSDING FB0047 watch dimensions and key specifications.

FiturDetil
MerekPENGEMBANGAN
ModelFB0047
Jenis GerakanKuarsa
Diameter Kasus42 mm
Ketebalan casing12 mm
Jenis Bahan PitaKulit
Warna PitaHitam
Lebar Pita22 mm
Tahan Air30 meter (3 ATM)
Berat65 gram

Garansi dan Dukungan

For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your purchase or visit the official SACOSDING websitus. Simpan bukti pembelian Anda untuk klaim garansi.

For further assistance, please contact SACOSDING customer service through the contact information provided on the product packaging or official weblokasi.

© 2023 SACOSDING. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.