Homepop Nailhead Trim Counter Height Bar Stool

Perkenalan

This manual provides instructions for the assembly, use, and maintenance of your Homepop Nailhead Trim Counter Height Bar Stool. Please read these instructions carefully before assembly and retain for future reference.

Gambar: Depan view of the Homepop Nailhead Trim Counter Height Bar Stool in Dark Gray, showcasing its upholstered seat and back with decorative nailhead trim along the edges, and sturdy wooden legs.

Informasi Keselamatan

• Pastikan semua komponen ada dan tidak rusak sebelum perakitan. Jangan gunakan jika ada komponen yang hilang atau rusak.
• Assemble the stool on a soft, clean surface to prevent scratching.
• Tighten all screws firmly, but do not overtighten. Periodically check and re-tighten all fasteners to ensure stability.
• Do not stand on the stool. Use only for sitting.
• Maximum weight capacity: 250 pounds (113 kg). Do not exceed this limit.
• Jauhkan komponen-komponen kecil dari jangkauan anak-anak selama perakitan.

Isi Paket

Sebelum memulai perakitan, pastikan semua komponen yang tercantum di bawah ini disertakan dalam paket Anda. Jika ada komponen yang hilang atau rusak, silakan hubungi dukungan pelanggan.

• Upholstered Seat and Back Assembly (1)
• Perakitan Kaki Depan (1)
• Perakitan Kaki Belakang (1)
• Peregang Samping (2)
• Front/Rear Stretchers (2)
• Paket Perangkat Keras (Sekrup, Ring, Kunci Allen)

Petunjuk Penyiapan dan Perakitan

Follow these steps carefully for proper assembly. It is recommended to have two people for easier assembly.

1. Bongkar Komponen: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to avoid damage.
2. Pasang Kaki Depan: Align the front leg assembly with the designated mounting points on the underside of the upholstered seat. Secure with the provided screws and washers. Hand-tighten only at this stage.
3. Pasang Kaki Belakang: Similarly, attach the rear leg assembly to the underside of the seat, securing with screws and washers. Hand-tighten.
4. Install Side Stretchers: Connect the side stretchers between the front and rear legs on each side. Ensure the holes align and insert the screws. Hand-tighten.
5. Install Front and Rear Stretchers: Attach the front stretcher between the front legs and the rear stretcher between the rear legs. Hand-tighten all screws.
6. Pengencangan Akhir: Once all components are loosely assembled, place the stool upright on a level surface. Apply gentle downward pressure to ensure all legs are evenly touching the floor. Then, using the Allen wrench, fully tighten all screws. Do not overtighten.
7. Periksa Stabilitas: Gently rock the stool to ensure it is stable and all connections are secure. If any wobbling occurs, loosen the screws slightly, adjust, and re-tighten.

Image: Diagram showing the dimensions of the bar stool: 39.5 inches high, 19 inches wide, and 24 inches deep.

Gambar: Detail view of the silver nailhead trim along the edge of the upholstered seat, highlighting the decorative accent.

Image: Close-up of the bottom of a wooden leg, showing a black protective foot glide designed to prevent floor scratches.

Petunjuk Pengoperasian

This counter height bar stool is designed for comfortable seating at kitchen counters, bar areas, or high tables. Ensure the stool is placed on a flat, stable surface before use.

• Tempat duduk: Sit gently onto the center of the seat. Avoid sudden impacts or leaning heavily on one side.
• Batas Berat: The stool is designed to support a maximum weight of 250 pounds (113 kg). Do not exceed this weight limit to prevent damage or injury.
• Pergerakan: When moving the stool, lift it rather than dragging it across the floor to protect both the stool's legs and your flooring.

Pemeliharaan dan Perawatan

Proper care will extend the life and appearance of your bar stool.

• Kain Pembersih: For general cleaning, wipe the upholstered fabric with a dry cloth. For spills or stains, spot clean only using a mild fabric cleaner and a clean, damp cloth. Test any cleaning solution on an inconspicuous area first.
• Membersihkan Kayu: Wipe wooden legs with a dry or slightly damp kain. Hindari bahan kimia keras atau pembersih abrasif.
• Paparan sinar matahari: Hindari paparan sinar matahari langsung dalam waktu lama untuk mencegah memudarnya warna kain dan lapisan kayu.
• Pemeriksaan Rutin: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten as necessary.

Gambar: Close-up view of the dark gray woven fabric texture, showing the material's detail and quality.

Penyelesaian Masalah

Spesifikasi

Garansi dan Dukungan

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official HomePop website. For customer support, assembly assistance, or to report missing/damaged parts, please contact HomePop customer service directly.

You may also refer to the retailer's return and support policies where the product was purchased.