Mecpow P50 Fume Extractor User Manual

1. Pendahuluan

The Mecpow P50 Fume Extractor is designed to provide a cleaner and safer working environment by effectively removing smoke, dust, and harmful particles generated during various processes, such as laser engraving and soldering. This manual provides essential information for the proper setup, operation, and maintenance of your P50 Fume Extractor.

2. Petunjuk Keselamatan

Please read all safety instructions carefully before operating the device. Failure to follow these instructions may result in injury or damage to the product.

• Pastikan catu daya sesuai dengan spesifikasi yang tertera pada perangkat.
• Do not operate the fume extractor in wet conditions or near flammable liquids or gases.
• Jaga agar saluran masuk dan keluar udara bebas dari penghalang untuk memastikan aliran udara yang tepat.
• Periksa kabel daya secara berkala untuk melihat apakah ada kerusakan. Jangan gunakan jika kabelnya rusak.
• Jangan mencoba membongkar atau memperbaiki unit sendiri. Hubungi petugas servis yang berkualifikasi untuk mendapatkan bantuan.
• Ganti filter sesuai anjuran untuk menjaga kinerja dan kualitas udara yang optimal.
• Jauhkan dari jangkauan anak-anak.

3. Produk Lebihview

3.1 Fitur Utama

• Hisapan Kuat: Equipped with a 50W brushless motor, providing 128m³/h airflow for instant smoke and particle capture.
• Sistem Filtrasi 3-Lapisan: Includes a pre-filter, medium HEPA filter, and activated carbon filter for 99.97% purification efficiency.
• Desain Tertutup: Integrated sealed design with precision-fit air inlet and protective foam to prevent smoke leakage.
• 3 Mode Kecepatan: Adjustable low, medium, and high-speed settings for various tasks.
• Operasi Tenang: Operates at a noise level under 55 dB.
• Kompatibilitas Luas: Compatible with Mecpow M1, Atomstack P1, and other laser engravers with a Φ50 mm flange.

3.2 Komponen

The Mecpow P50 Fume Extractor consists of the main unit, a flexible exhaust hose, and a power cable. The internal filtration system comprises three distinct layers.

Figure 3.2.1: Mecpow P50 Fume Extractor with exhaust hose. This image shows the complete fume extractor unit, including the main body and the flexible exhaust hose connected to the top.

Gambar 3.2.2: Rinci view of the 3-Layer Filtration System. This diagram illustrates the three filter layers: (1) Pre-Filter for large particles, (2) Medium HEPA Filter for fine particles, and (3) Activated Carbon Filter for harmful gases and odors.

Figure 3.2.3: Product Dimensions of the Mecpow P50. This image displays the height (240 mm / 9.45 inch) and width (148 mm / 5.83 inch front, 128 mm / 5.04 inch side) of the fume extractor unit.

4. Pengaturan

1. Membongkar: Keluarkan semua komponen dari kemasan dengan hati-hati. Pastikan semua komponen yang tercantum dalam daftar kemasan tersedia.
2. Instalasi Filter:
   • Open the top cover of the fume extractor.
   • Insert the activated carbon filter at the bottom, followed by the medium HEPA filter, and finally the pre-filter on top. Ensure they are seated correctly.
   • Tutup penutup atas dengan rapat.
3. Sambungan Selang: Attach one end of the flexible exhaust hose to the outlet on top of the fume extractor. Secure it firmly.
4. Penempatan: Position the fume extractor on a stable, flat surface near your laser engraver or soldering station. Connect the other end of the exhaust hose to the fume outlet of your laser engraver (if applicable) or position it to capture fumes effectively.
5. Sambungan Daya: Connect the power cable to the fume extractor and then plug it into a suitable power outlet.

Figure 4.1: Mecpow P50 Fume Extractor set up with a laser engraver. This image demonstrates the fume extractor connected via its hose to a laser engraver, showing a typical setup for fume extraction during operation.

5. Petunjuk Pengoperasian

1. Nyalakan: Tekan tombol AKTIF/NONAKTIF button located on the front panel to turn on the fume extractor. The indicator light will illuminate.
2. Adjusting Airflow Speed:
   • Tekan tombol MENGALIR button to cycle through the three airflow speed levels: Low, Medium, and High.
   • Select the appropriate speed based on the intensity of fumes and your working environment.
3. Operasi: Begin your laser engraving or soldering task. The fume extractor will continuously draw in smoke and particles, purifying the air.
4. Matikan: After completing your task, press the AKTIF/NONAKTIF button again to turn off the fume extractor.

Figure 5.1: Control panel and airflow speed levels. This image highlights the control buttons for power and airflow, showing indicators for Low, Medium, and High speed settings.

Figure 5.2: Sealed design for effective fume containment. This image illustrates the fume extractor's sealed design, demonstrating how it prevents smoke leakage and maintains a clean workspace.

Figure 5.3: Quiet operation of the Mecpow P50. This image shows the fume extractor in a home environment, emphasizing its low noise level (under 55 dB) compared to typical traffic noise or normal conversation.

6. Pemeliharaan

Regular maintenance ensures the longevity and optimal performance of your Mecpow P50 Fume Extractor.

6.1 Penggantian Filter

The 3-layer filtration system requires periodic replacement to maintain 99.97% purification efficiency. The frequency of replacement depends on usage and the type of materials processed.

1. Matikan: Ensure the fume extractor is turned off and unplugged before performing any maintenance.
2. Unit Terbuka: Carefully open the top cover of the fume extractor.
3. Hapus Filter Lama: Remove the pre-filter, medium HEPA filter, and activated carbon filter. Dispose of used filters responsibly according to local regulations.
4. Pasang Filter Baru: Place new filters in the correct order: activated carbon filter at the bottom, then the medium HEPA filter, and finally the pre-filter on top. Ensure a snug fit.
5. Unit Tertutup: Securely close the top cover.

Replacement filters can be purchased from authorized Mecpow retailers or the official Mecpow weblokasi.

6.2 Membersihkan Unit

• Wipe the exterior of the fume extractor with a soft, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
• Pastikan tidak ada cairan yang masuk ke komponen internal.
• Periodically check the exhaust hose for any blockages or damage. Clean if necessary.

7. Penyelesaian masalah

8. Spesifikasi

• Model: Bagian 50
• Tenaga Motor: 50W (Tanpa Sikat)
• Laju aliran udara: 128 m³/jam
• Sistem Filtrasi: 3-Layer (Pre-filter, Medium HEPA filter, Activated Carbon filter)
• Purification Rate: 99.97%
• Tingkat Kebisingan: < 55 dB
• Kesesuaian: Mecpow M1, Atomstack P1, and other laser engravers with Φ50 mm flange.
• Berat Barang: 10.01 pon (sekitar 4.54 kg)
• Dimensi (perkiraan): 148 mm (W) x 128 mm (D) x 240 mm (H)

9. Garansi dan Dukungan

9.1 Informasi Garansi

Mecpow provides a 1-year warranty for the P50 Fume Extractor from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

Harap simpan bukti pembelian Anda untuk klaim garansi.

9.2 Dukungan Pelanggan

For technical assistance, troubleshooting, or warranty inquiries, please contact Mecpow customer support through the official website or your retailer. Our support team is available to help you with any questions or issues you may encounter.

Visit the official Mecpow website for the latest support information and contact details: www.mecpow.com