NATFIRE A07 Smart Bike Tail Light User Manual

1. Pendahuluan

Thank you for choosing the NATFIRE A07 Smart Bike Tail Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new tail light. Please read this manual thoroughly before use to ensure optimal performance and safety.

The NATFIRE A07 is designed to enhance your cycling safety with its advanced features, including smart brake sensing, USB-C recharging, and multiple lighting modes. Its robust, weather-resistant design ensures reliable performance in various conditions.

2. Informasi Keselamatan

Selalu pastikan lampu belakang terpasang dengan aman sebelum berkendara.
Jangan melihat langsung ke arah cahaya saat lampu menyala, karena dapat menyebabkan gangguan penglihatan sementara.
Jauhkan perangkat dari jangkauan anak-anak.
Do not disassemble or attempt to repair the light yourself. Contact customer support for assistance.
Ensure the USB-C port cover is properly sealed after charging to maintain water resistance.
This light is designed to increase visibility; it does not replace the need for safe cycling practices.

3. Isi Paket

Silakan periksa paket untuk item berikut:

NATFIRE A07 Smart Bike Tail Light
Mounting Bracket (Slant or Seat Bracket, depending on variant)
Silicone Strap (for Slant Bracket)
Kabel Pengisian Daya USB-C
Panduan Pengguna

4. Produk Lebihview

The NATFIRE A07 Smart Bike Tail Light features a compact design with advanced functionalities to enhance your visibility on the road.

Fitur Utama:

Sensor Rem Cerdas: Automatically detects deceleration and activates a brighter brake light.
USB-C Isi Ulang: Pengisian daya yang nyaman dan cepat.
Baterai 800mAh: Memberikan waktu pengoperasian yang lebih lama.
100LM Ultra Bright: High visibility output.
IPX5 Tahan Air: Tahan terhadap cipratan air dari arah mana pun.
Pemasangan Serbaguna: Supports both horizontal and vertical installation.
Tidur/Bangun Otomatis: Conserves battery by entering sleep mode when stationary and waking up upon movement.

Komponen:

Refer to the image below for a visual representation of the tail light's components.

NATFIRE A07 Smart Bike Tail Light showing its main body, red top, and USB-C charging port. — Figure 1: NATFIRE A07 Tail Light with USB-C port and mounting base.

The tail light unit includes a power button on the top, a USB-C charging port on the side, and a mounting interface on the bottom for attaching to the bracket.

NATFIRE A07 Smart Brake Tail Light highlighting features like Automatic Brake Light, 100LM Ultra Bright, USB-C Rechargeable, IPX5 Waterproof, 800mAh Battery, and Horizontal/Vertical mounting. — Figure 2: Key features of the NATFIRE A07 Tail Light.

This image illustrates the primary features of the A07 tail light, including its automatic brake light function, high brightness, USB-C charging capability, water resistance, battery capacity, and flexible mounting options.

5. Pengisian daya

Before first use, fully charge the NATFIRE A07 tail light.

Locate the USB-C charging port on the side of the tail light.
Open the rubber cover protecting the USB-C port.
Connect the provided USB-C cable to the tail light and the other end to a USB power source (e.g., computer, wall adapter).
Lampu indikator akan menunjukkan status pengisian daya (misalnya, merah untuk pengisian daya, hijau untuk terisi penuh).
Once fully charged, disconnect the cable and securely close the rubber cover to maintain water resistance.

6. Pengaturan dan Instalasi

The NATFIRE A07 offers flexible installation options for various bicycle setups.

Installation steps for NATFIRE A07 Smart Bike Tail Light, showing both slant bracket and seat bracket methods. — Figure 3: Installation methods for the A07 Tail Light.

This image details two primary installation methods: using a slant bracket with a silicone strap for the seatpost, and a seat bracket for mounting under the saddle rails.

6.1. Slant Bracket Installation (for Seatpost)

Attach the silicone strap to the seatpost.
Fasten the silicone strap securely around the seatpost.
Install the tail light onto the base of the slant bracket.
The light can be installed horizontally or vertically on the bracket.

6.2. Seat Bracket Installation (for Saddle Rails)

Buckle the strap of the seat bracket, fixing it onto the seat rail track.
Install the tail light onto the bracket.
The light can be installed horizontally or vertically on the bracket.

7. Petunjuk Pengoperasian

The NATFIRE A07 features intuitive controls for power and mode selection.

NATFIRE A07 Light Mode diagram showing different modes: Brake, Automatic Sleep, Auto Wake Up, and Three Lights Mode (Running Light Mode1, Running Light Mode2, Double Flashing). — Figure 4: NATFIRE A07 Light Modes and Smart Functions.

This diagram illustrates the various operational modes and smart features of the A07 tail light, including how brake sensing, automatic sleep, and auto wake-up functions work, along with the available running light modes.

7.1. Daya Hidup/Mati

Untuk menghidupkan: Press and hold the power button (located on the top of the light) for approximately 2 seconds.
Untuk mematikan: Tekan dan tahan tombol daya selama kurang lebih 2 detik.

7.2. Pemilihan Mode

With the light powered on, short press the power button to cycle through the available lighting modes:

Running Light Mode 1: Standard steady light.
Running Light Mode 2: Another steady light pattern or intensity.
Berkedip Ganda: A distinct flashing pattern for increased visibility.

7.3. Fungsi Cerdas

Automatic Brake Light: When the light detects deceleration (braking), it will automatically switch to a brighter strobe for approximately 5 seconds to alert following traffic.
Tidur Otomatis: If the light is on and no movement is detected for a period (e.g., when you stop cycling), it will enter a sleep mode to conserve battery.
Bangun Otomatis: When movement or shock is detected while in sleep mode, the light will automatically turn on and resume its last active mode.

8. Pemeliharaan

Pembersihan: Usap lampu dengan lembut, damp kain. Jangan gunakan pembersih atau pelarut yang bersifat abrasif.
Penyimpanan: Store the light in a cool, dry place when not in use. For long-term storage, charge the battery every 3-6 months to prolong its lifespan.
Tahan Air: Ensure the USB-C port cover is always securely closed to maintain the IPX5 water resistance rating.

9. Penyelesaian masalah

Masalah	Kemungkinan Penyebab	Larutan
Lampu tidak menyala	Baterai lemah Tombol daya tidak ditekan dengan benar	Charge the light fully Tekan dan tahan tombol daya selama 2 detik
Cahaya tidak dikenakan biaya	Kabel atau sumber listrik rusak USB-C port obstructed	Coba kabel USB-C dan sumber daya yang berbeda Check the USB-C port for debris
Sensor rem tidak berfungsi	Light not securely mounted Sudden deceleration not detected	Ensure the light is firmly attached to the bracket and bike Brake sensing activates with significant deceleration, not minor speed changes
Auto sleep/wake-up not functioning	Constant minor vibrations Feature disabled (if applicable)	Ensure the bike is completely stationary for auto-sleep to activate Refer to operating instructions for feature activation

10. Spesifikasi

Model: Nomor telepon A07
Pabrikan: YHNNH
Kapasitas Baterai: 800 mAh
Kecerahan: 100 Lumens (LM)
Port Pengisian Daya: USB Tipe C
Peringkat Tahan Air: Tingkat IPX5
Berat: Sekitar 50g
Ukuran: Approximately 1 x 1 x 1 cm (Parcel Dimensions, actual product may vary slightly)
Pemasangan: Horizontal dan Vertikal

11. Garansi dan Dukungan

The NATFIRE A07 Smart Bike Tail Light comes with a standard manufacturer's warranty. Please refer to the product packaging or contact your retailer for specific warranty terms and conditions.

For technical support, troubleshooting assistance, or warranty claims, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.