NEOECO Transformer SJ85 Dual-Action Airbrush Kit

1. Pendahuluan

Thank you for choosing the NEOECO Transformer SJ85 Dual-Action Airbrush Kit. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your new airbrush. Please read these instructions thoroughly before first use and retain them for future reference.

2. Produk Lebihview dan Komponen

The NEOECO Transformer SJ85 is a versatile dual-action airbrush designed for precision and broad coverage. It features a patented Quick-Shift technology for instant spray pattern changes and an ergonomic grip for comfort during extended use. Below is an illustration of the kit components:

Gambar: NEOECO Transformer SJ85 Airbrush Kit with all included components labeled numerically.

Isi Paket:

1. 0.3mm Nozzle System
2. 0.8mm Nozzle System
3. Cangkir 15cc
4. 4pcs Seals (Spare O-rings)
5. Container Box
6. Panduan Pengguna
7. Tubuh Airbrush
8. Konektor Cepat
9. Penetes mata
10. Resource Center Card
11. 0.8mm Needle
12. 0.3mm Needle
13. Pre-installed: 0.5mm Nozzle System and Needle

3. Fitur Utama

3.1 Pegangan Ergonomis

The Transformer SJ85 features an enlarged, extended ergonomic grip designed to fit the natural shape of your palm. A dedicated finger rest groove provides stability, and the non-slip matte texture ensures a secure hold, reducing fatigue during prolonged use.

Gambar: Close-up of the airbrush handle highlighting the integrated finger rest and natural palm swell for ergonomic comfort.

3.2 Patented Quick-Shift Technology

This patented technology allows for an instant switch between a wide Fan Pattern for base coats and a precision Round Pattern for fine details. The 360° rotating head provides full control without the need for tools or disassembly.

Gambar: Diagram illustrating the Quick-Shift mechanism, showing how to pull to shift between Round Pattern and Fan Pattern.

3.3 Self-Centering Drop-In Nozzle System

The innovative drop-in self-centering nozzle eliminates fragile threads, ensuring perfect alignment and consistent atomization. The oversized design with a removal groove simplifies cleaning and part swapping.

Gambar: Steps for removing and inserting the self-centering nozzle and needle for maintenance.

3.4 Multiple Nozzle Sizes

The kit includes 0.3mm, 0.5mm (pre-installed), and 0.8mm nozzle sets, allowing for versatility across various applications from intricate details to broad coverage.

Gambar: Visual representation of the three nozzle sizes (0.3mm, 0.5mm, 0.8mm) and their recommended uses.

3.5 Airflow and Paint Flow Control

The airbrush features an integrated MAC valve for on-the-fly air pressure adjustments and a pre-set handle for accurate paint flow limiting, ensuring consistent results.

Gambar: Close-up showing the on-the-fly airflow control (MAC valve) and the precision paint flow limiter on the airbrush.

4. Pengaturan

4.1 Connecting to an Air Source

1. Ensure your air compressor is turned off and depressurized.
2. Attach the quick connector (8) to your air hose.
3. Connect the quick connector to the airbrush body's air inlet. Ensure a secure fit.
4. Turn on your air compressor and set it to the desired operating pressure.

4.2 Installing/Changing Nozzles and Needles

The airbrush comes with a 0.5mm nozzle system pre-installed. To change or install a different size:

1. Unscrew the needle chucking guide at the rear of the airbrush and carefully remove the needle.
2. Unscrew the nozzle cap at the front of the airbrush.
3. Gently twist and pull the existing nozzle system out.
4. Insert the desired nozzle system (0.3mm, 0.5mm, or 0.8mm) into the airbrush body. Ensure it seats correctly.
5. Screw the nozzle cap back on, hand-tightening only.
6. Carefully reinsert the corresponding needle (0.3mm, 0.5mm, or 0.8mm) through the rear of the airbrush until it stops.
7. Screw the needle chucking guide back on, ensuring the needle is secure but can still move freely when the trigger is pulled back.

4.3 Loading Paint

1. Ensure your paint is properly thinned for airbrushing. Use the included eye dropper (9) if needed.
2. Open the lid of the 15cc cup (3).
3. Pour the prepared paint into the cup. Do not overfill.
4. Close the cup lid securely to prevent spills and maintain paint consistency.

5. Petunjuk Pengoperasian

5.1 Basic Operation (Dual-Action Trigger)

1. Air First: Press down on the trigger to release air. This ensures air is flowing before paint, preventing splattering.
2. Paint Second: While holding the trigger down, pull it back to release paint. The further back you pull, the more paint is released.
3. Release Paint First: When finishing a stroke, release the trigger forward to stop paint flow before releasing the downward pressure to stop air flow. This prevents paint from drying on the needle tip.

5.2 Using Quick-Shift Technology

To switch between spray patterns:

1. Locate the Quick-Shift mechanism at the front of the airbrush, just behind the nozzle cap.
2. Untuk mengaktifkan Pola Kipas, pull the mechanism forward until it clicks into place.
3. Untuk mengaktifkan Round Pattern, push the mechanism backward until it clicks into place.
4. You can rotate the Quick-Shift head 360° to adjust the orientation of the fan spray.

Gambar: Visual comparison of the spray patterns: Round Pattern for focused work (e.g., pre-shading) and Fan Pattern for effortless coverage (e.g., priming).

5.3 Adjusting Airflow and Paint Flow

• Airflow Control (MAC Valve): The integrated MAC valve, located near the air inlet, allows you to fine-tune air pressure directly from the airbrush. Turn it clockwise to decrease airflow and counter-clockwise to increase airflow.
• Paint Flow Limiter: The knob at the rear of the airbrush (needle chucking guide) acts as a paint flow limiter. Turning it clockwise restricts how far the needle can retract, limiting the maximum paint flow. This helps achieve consistent lines and repeatable results.

6. Pemeliharaan

Proper cleaning and maintenance are crucial for the longevity and performance of your airbrush. Clean your airbrush immediately after each use, especially when changing colors or finishing a session.

6.1 Basic Cleaning After Each Use

1. Kosongkan sisa cat yang ada di dalam cangkir.
2. Add a small amount of appropriate cleaner (e.g., airbrush cleaner, water for acrylics, solvent for enamels) to the paint cup.
3. Back-flush: Cover the nozzle cap with your finger or a cap and press the trigger down to release air. This will force air back into the cup, bubbling and cleaning the inside.
4. Spray the cleaner through the airbrush onto a paper towel until it sprays clear.
5. Repeat steps 2-4 until no paint residue is visible.

6.2 Deep Cleaning (Periodically or for Clogs)

1. Disassemble the airbrush: Remove the needle, nozzle cap, and nozzle system as described in Section 4.2.
2. Clean all removed parts with appropriate cleaner and a soft brush or cotton swab. Pay special attention to the nozzle and needle tip.
3. Clean the paint cup and the airbrush body's internal channels.
4. Inspect O-rings (seals) for wear or damage. Replace if necessary using the included spare O-rings (4).
5. Reassemble the airbrush carefully, ensuring all parts are correctly seated and tightened appropriately (hand-tighten only for delicate parts).

7. Penyelesaian masalah

8. Spesifikasi

• Dimensi Produk: 6.69x1.18x6.69 inci
• Nomor Model Barang: NCT-SJ85 TRANSFORMER
• ASIN: B0FRSMMHGP
• Berat Barang: 1.08 pon
• Pabrikan: NEOECO
• Nozzle Sizes Included: 0.3mm, 0.5mm, 0.8mm
• Pola Semprot: Round, Fan (via Patented Quick-Shift)
• Kontrol Udara: Integrated MAC Valve
• Paint Control: Precision Paint Flow Limiter
• Kapasitas Cangkir: 15cc

9. Garansi dan Dukungan

NEOECO products are manufactured to high-quality standards. For warranty information, technical support, or replacement parts, please refer to the Resource Center Card included in your kit or visit the official NEOECO websitus. Simpan struk pembelian Anda sebagai bukti pembelian.