SNIXWOO Side Steps Running Boards for Hyundai Palisade 2026 Instruction Manual

1. Pendahuluan

This instruction manual provides detailed guidance for the proper installation, safe operation, and routine maintenance of your SNIXWOO Side Steps Running Boards. These running boards are specifically designed for the Hyundai Palisade 2026 model, offering a stable and convenient stepping platform for vehicle entry and exit, while also providing side protection.

Please read this manual thoroughly before installation and use to ensure correct procedures and to prevent damage to the product or your vehicle.

Image 1.1: Side steps provide easier access to the vehicle.

2. Kompatibilitas

These SNIXWOO Side Steps Running Boards are custom designed for a vehicle-specific fit.

• Kompatibel dengan: Hyundai Palisade 2026 model.
• Tidak Kompatibel dengan: Hyundai Palisade 2020-2025 models.

Image 2.1: Visual representation of vehicle compatibility.

3. Isi Paket

Verify that all components listed below are present and undamaged before beginning installation. If any parts are missing or damaged, contact SNIXWOO customer support.

• Driver Side Running Board (1)
• Passenger Side Running Board (1)
• Mounting Brackets (Specific to vehicle model)
• All Necessary Mounting Hardware (Bolts, washers, nuts, etc.)
• Detailed Installation Instructions (This manual)

4. Pengaturan dan Instalasi

Installation of these running boards does not require drilling, preserving your vehicle's original structure. It is recommended to have a second person assist with the installation due to the size and weight of the running boards. Typical installation time is less than 4 hours for both sides.

4.1 Alat yang Diperlukan (Tidak Termasuk)

• Set Kunci Soket
• Kunci Torsi
• Pita Pengukur
• Kacamata Keselamatan
• Sarung tangan

4.2 Langkah Pra-Instalasi

1. Parkirkan kendaraan di permukaan yang rata dan aktifkan rem parkir.
2. Ensure the vehicle is cool to the touch before starting.
3. Clean the installation areas on the vehicle's undercarriage where the brackets will attach.
4. Identify the driver and passenger side running boards.

4.3 Prosedur Instalasi

1. Locate the factory mounting points on the vehicle's frame or rocker panel. These are typically pre-drilled holes or existing bolts.
2. Attach the mounting brackets to the vehicle's frame using the provided hardware. Hand-tighten all bolts initially.
3. Carefully lift the running board into position and align it with the attached mounting brackets.
4. Secure the running board to the brackets using the remaining hardware. Hand-tighten all bolts.
5. Adjust the running board for optimal alignment and desired protrusion from the vehicle. Ensure it is level and evenly spaced.
6. Once satisfied with the alignment, fully tighten all bolts to the manufacturer's specified torque settings (refer to your vehicle's service manual for general torque specifications for frame bolts, or consult a professional).
7. Repeat the process for the opposite side of the vehicle.
8. Catatan Penting: Some users have reported needing to remove a small, temporary plastic clip or section on the front end of the vehicle's undercarriage for optimal front step alignment. This is a minor adjustment and does not affect the vehicle's integrity.

Image 4.1: Product dimensions for reference during installation.

5. Petunjuk Pengoperasian

The SNIXWOO Side Steps Running Boards are designed to provide a stable and secure platform for stepping into and out of your Hyundai Palisade 2026. They also offer a degree of protection to the lower sides of your vehicle from road debris.

• Melangkah: Use the running boards as a stable step when entering or exiting the vehicle. Ensure your footing is secure before applying full weight.
• Kapasitas Berat: The running boards are designed to support up to 500 lbs (226 kg) per side. Do not exceed this weight limit.
• Perlindungan: The running boards act as a barrier against minor impacts from road debris, mud, and gravel, helping to protect your vehicle's paint and bodywork.

6. Pemeliharaan

Regular maintenance will ensure the longevity and optimal performance of your running boards.

• Pembersihan: Clean the running boards regularly with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Rinse thoroughly and dry to prevent water spots.
• Inspeksi: Periodically inspect all mounting hardware (bolts, nuts, brackets) for tightness. Re-tighten any loose fasteners to prevent rattling or instability.
• Pemeriksaan Kerusakan: Check for any signs of damage, such as cracks, bends, or excessive wear. Address any damage promptly to maintain safety and structural integrity.

7. Penyelesaian masalah

If you encounter any issues with your running boards, refer to the following common problems and solutions.

If the problem persists after attempting these solutions, please contact SNIXWOO customer support for further assistance.

8. Spesifikasi

9. Garansi dan Dukungan

For warranty information or technical support, please contact SNIXWOO directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase for any warranty claims.

SNIXWOO is committed to providing quality products and customer satisfaction. Do not attempt to modify the product, as this may void the warranty and compromise safety.