ONEVAN F30G Electric Nail Gun Instruction Manual

1. Pendahuluan

This manual provides essential information for the safe and effective operation, assembly, and maintenance of your ONEVAN F30G Electric Nail Gun. Please read all instructions carefully before use to ensure proper handling and to prevent injury or damage to the tool.

2. Spesifikasi

The ONEVAN F30G Electric Nail Gun is a versatile tool designed for various fastening applications, including wood inlaying and furniture manufacturing. It features a brushless motor for high efficiency and durability.

Note: Specifications are subject to change without notice due to continuous research and development. Actual specifications and battery cartridges may vary by region.

3. Struktur dan Komponen Produk

Familiarize yourself with the different parts of your nail gun for safe and efficient operation.

• Alloy steel gun mouth: The durable tip where nails are ejected.
• Aluminum alloy box: Houses the nail magazine.
• Springs buckle: Secures the nail magazine.
• Baterai Litium: Provides power to the cordless tool.
• Security lock: Prevents accidental firing.
• Mengalihkan: Mengaktifkan alat tersebut.
• Anti-slip handle: Didesain secara ergonomis untuk genggaman yang nyaman dan aman.
• Panel kendali: Displays battery status and allows mode selection.

4. Peringatan Keamanan

PERINGATAN: Bacalah semua peringatan keselamatan, petunjuk, ilustrasi, dan spesifikasi yang diberikan bersama perkakas listrik ini. Kelalaian dalam mengikuti semua petunjuk yang tercantum di bawah ini dapat menyebabkan sengatan listrik, kebakaran, dan/atau cedera serius. Simpan semua peringatan dan instruksi untuk referensi di masa mendatang.

4.1. Peringatan Keselamatan Perkakas Listrik Umum

• Keselamatan area kerja: Keep work area clean and well lit. Do not operate power tools in explosive atmospheres. Keep children and bystanders away.
• Keamanan Listrik: Power tool plugs must match the outlet. Avoid body contact with earthed surfaces. Do not expose power tools to rain or wet conditions. Do not abuse the cord. When operating outdoors, use an extension cord suitable for outdoor use. If operating in damp locations, use a residual current device (RCD) protected supply.
• Keamanan Pribadi: Stay alert, use common sense. Wear eye protection. Prevent unintentional starting. Remove adjusting keys/wrenches before turning on. Do not overreach. Dress properly. Use dust extraction/collection facilities if provided.
• Penggunaan dan Perawatan Alat Listrik: Do not force the power tool. Do not use if the switch does not turn it on and off. Disconnect power before adjustments or storing. Store idle tools out of reach of children. Maintain tools and accessories. Use the correct accessories for the work.

4.2. Penggunaan dan Perawatan Alat Baterai

• Isi ulang hanya dengan pengisi daya yang ditentukan oleh produsen.
• Gunakan perkakas listrik hanya dengan baterai yang dirancang khusus.
• When battery pack is not in use, keep it away from other metal objects that could short the terminals.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact occurs, flush with water and seek medical help.

4.3. Cordless Nailer Specific Safety Warnings

• Selalu asumsikan bahwa alat tersebut berisi pengencang.
• Jangan arahkan alat ke arah Anda atau orang di sekitar.
• Do not actuate the tool unless it is placed firmly against the workpiece.
• Disconnect the tool from the power source when a fastener jams.
• Use caution when removing a jammed fastener.
• Jangan gunakan nailer ini untuk mengikat kabel listrik.
• Jauhkan tangan dan kaki dari area port ejeksi.
• Always remove the battery cartridge before loading fasteners, adjustment, inspection, maintenance, or after operation.
• Pastikan tidak ada orang di sekitar sebelum operasi.
• Watch your footing and maintain your balance with the tool.
• Never use fastener driving tools marked with the symbol "Do not use on scaffoldings, ladders" for specific applications.
• Check walls, ceilings, floors, roofing for electrical shock, gas leakage, explosions.
• Gunakan hanya pengencang yang ditentukan dalam manual ini.
• Jangan tamper dengan alat atau mencoba menggunakannya selain untuk mengemudi pengencang.
• Do not operate the tool without fasteners.
• Stop driving operations immediately if you notice something wrong.
• Jangan sekali-kali mengikatkan ke bahan apa pun yang memungkinkan pengikat tertusuk dan terbang sebagai proyektil.
• Never actuate the switch trigger and Switch button at the same time until you are prepared to fasten workpieces.
• Selalu lepaskan pengencang dari alat saat tidak digunakan.

4.4. Important Safety Instructions for Battery Cartridge

• Before using, read all instructions and cautionary markings on the battery charger, battery, and product using battery.
• Jangan membongkar kartrid baterai.
• If operating time becomes excessively shorter, stop operating immediately.
• If electrolyte gets into your eyes, rinse with clear water and seek medical attention.
• Do not short the battery cartridge by touching terminals with conductive material, storing with other metal objects, or exposing to water/rain.
• Jangan simpan alat dan kartrid baterai di lokasi yang suhunya dapat mencapai atau melebihi 50 °C (122 °F).
• Jangan membakar kartrid baterai.
• Berhati-hatilah agar baterai tidak terjatuh atau terbentur.
• Jangan gunakan baterai yang rusak.
• For commercial transports of lithium-ion batteries, observe special requirements on packaging and labeling.
• Follow local regulations relating to disposal of battery.
• If the tool has not been used for a long time, the battery must be removed.

5. Perakitan

5.1. Loading or Unloading Nails

CAUTION: Always make sure that your fingers are not placed on the switch trigger or the contact element and the battery cartridge is removed before carrying out any work on the nailer, especially when loading or unloading nails.

CAUTION: Load nails in the correct direction. Loading in the wrong direction may cause premature wear and tear of the driver and damage of the other parts.

CAUTION: Do not use deformed nail strips. Use nails specified in this manual. Using nails other than those specified may cause nail jamming and breakage of the nailer.

1. Tekan tuas pengunci dan buka pintu geser majalah.
2. Set a nail strip so that the nail tips touch the bottom of the magazine and slide the nail strip toward the firing opening.
3. Kembalikan pintu geser ke posisi semula sampai tuas pengunci menguncinya.

Untuk melepas paku, tekan tuas pengunci dan geser pintu geser. Keluarkan paku dari majalah.

6. Operasi

PERINGATAN: Terus letakkan elemen kontak dengan kuat pada material hingga paku tertancap sepenuhnya. Penembakan yang tidak disengaja dapat menyebabkan cedera diri.

6.1. Driving Nails - Single Short Mode

1. Press and hold the switch button for 1 second to activate the tool and enter single-drive mode (default).
2. Lepaskan kunci pemicu.
3. Align the tool head vertically to the target position.
4. Fully pull the trigger to shoot the nail.
5. To drive the next nail, release your finger from the switch trigger once, and then repeat steps 3 and 4.

6.2. Driving Nails - Continuous Short Mode

1. In single-drive mode, press the switch button to enter continuous-drive mode.
2. In continuous-drive mode, the tool can continuously drive up to 100 nails per minute by pulling the trigger.

Jika kepala paku tetap berada di atas permukaan benda kerja, gerakkan paku sambil memegang kepala paku dengan kuat pada benda kerja.

NOTE: If the head of the nail still remains above the workpiece even when holding the nail head, the material may not be suitable for the nailer. Continuing to use the nailer on such material may result in damage to the driver or nailer jamming.

6.3. Shutdown the Nailer

1. Press and hold the switch button for 1 second to turn off the tool in any working mode after use.

7. Pemeliharaan

7.1. Tips for Maintaining Maximum Battery Life

• Charge the battery cartridge before it is completely discharged. Stop operation and charge when you notice less tool power.
• Never recharge a fully charged battery cartridge. Overcharging shortens battery service life.
• Charge the battery cartridge at room temperature (10 °C - 40 °C / 50 °F - 104 °F). Let a hot battery cartridge cool down before charging.
• Isi daya kartrid baterai jika Anda tidak menggunakannya dalam jangka waktu lama (lebih dari enam bulan).

7.2. Tool / Battery Protection System

The tool is equipped with a tool/battery protection system that automatically cuts off power to the motor to extend tool and battery life under certain conditions:

• Perlindungan kelebihan beban: If the tool/battery draws abnormally high current, it stops automatically. Turn off the tool, stop the application, then turn it on to restart.
• Perlindungan terhadap panas berlebih: If the tool/battery overheats, it stops automatically. Let it cool down before turning it on again.
• Perlindungan kelebihan muatan: If the battery capacity is not enough, the tool stops automatically. Remove the battery and charge it.

8. Penyelesaian masalah

This section addresses common issues you might encounter with your ONEVAN F30G Electric Nail Gun. For more complex problems, please refer to the warranty and support section.

• Tool stops unexpectedly during operation: This is likely due to the tool/battery protection system. Check for:
  • Kelebihan muatan: Turn off the tool, remove the cause of overload (e.g., trying to nail into overly hard material), and restart.
  • Menjadi terlalu panas: Allow the tool and battery to cool down before restarting.
  • Overdischarge: Remove the battery and charge it fully.
• Nails not driving completely or jamming:
  • Ensure the tool head is firmly pressed against the workpiece.
  • Verify that the nails are loaded in the correct direction and are not deformed.
  • Check if the material is suitable for the nailer; some materials may be too hard.
  • Pastikan baterai terisi cukup.
• Alat tidak menyala:
  • Periksa apakah baterai telah dimasukkan dan terisi dengan benar.
  • Ensure the switch button is pressed and held for at least 1 second.
  • Verify that the trigger lock is released.

9. Kiat Pengguna

• For repetitive tasks, utilize the continuous short mode to increase efficiency.
• Always keep a spare charged battery on hand for uninterrupted work, especially on larger projects.
• Regularly clean the nail magazine and gun mouth to prevent nail jams and ensure smooth operation.
• When working on delicate surfaces, test the nail depth on a scrap piece of material first to avoid damage.

10. Garansi dan Dukungan

Untuk informasi garansi, dukungan teknis, atau pertanyaan layanan, silakan hubungi penjual atau produsen Anda secara langsung. Simpan struk pembelian Anda sebagai bukti pembelian.

Panduan pengguna dalam format PDF tersedia untuk diunduh: Panduan pengguna (PDF)